Sharif Digital Repository

The Cosmic Microwave Background (CMB) radiation lensing is a promising tool to study the physics of early universe. In this work we probe the imprints of deviations from isotropy and scale invariance of primordial curvature perturbation power spectrum on CMB lensing potential and convergence. Specifically, we consider a scale-dependent hemispherical asymmetry in primordial power spectrum. We show that the CMB lensing potential and convergence and also the cross-correlation of the CMB lensing and late time galaxy convergence can probe the amplitude and the scale dependence of the dipole modulation. As another example, we consider a primordial power spectrum with local feature. We show that... 

Application of the colloidal gas aphrons (CGAs) in minimizing formation damage by plugging pore mechanism is now wildly accepted due to numerous successful field experience. One of the pivotal factors which affects the pore blockage ability of micro-bubbles is their stability. This experimental study tries to investigate the possible synergistic effect of nanoparticles on improving the stability and other properties of non-aqueous CGA drilling fluids, in both bulk and porous media. In particular, two types of hydrophobic nanoparticles including silicon dioxide nanopowder coated with 2 wt% Silane and nanoclay, in presence of a treated version of bentonite (Bentone 34) as a stabilizer and... 

Microbial desalination cell (MDC) is a new bio-electrochemical technique which converts chemical energy into electrical energy, and at the same time desalinates water and treats wastewater. In this study, MDC performance and water biofouling conditions were tested as an efficient pretreatment desalination process of reverse osmosis (RO). The experiments were designed in a three-chamber reactor to compare the performance of batch and continuous fed modes, using bio-cathode and synthetic wastewater in four different hydraulic retention times and 17 and 35 g/L NaCl concentrations. According to the results, maximum salt removal of about 52.3% was obtained in the continuously fed MDC at 35 g/L... 

This paper presents a formulation for in-plane modal characteristics of non-uniform thickness annular elliptic and circular plates for all classical boundary conditions. The investigations are performed for elastic and isotropic annular elliptic plates on the basis of two- dimensional linear plane stress theory of elasticity. Two-dimensional boundary characteristic orthogonal polynomials (BCOP) are used in the Rayleigh-Ritz method to obtain the natural frequencies and associated mode shapes. The proposed method, not only can find solution for those simple cases of annular circular plates available in literature as a simplified case study, but also it finds some natural frequencies which can... 

In this paper, distributions of stress and strain components of rotating disks with non-uniform thickness and material properties subjected to thermo-elasto-plastic loading are obtained by semi-exact method of Liao's homotopy analysis method (HAM) and finite element method (FEM). The materials are assumed to be elastic-linear strain hardening and isotropic. The analysis of rotating disk is based on Von Mises' yield criterion. A two dimensional plane stress analysis is used. The distribution of temperature is assumed to have power forms with the hotter point located at the outer surface of the disk. A mathematical technique of transformation has been proposed to solve the homotopy equations... 

Statistical and biochemical studies have revealed non-random patterns in codon assignments. The canonical genetic code is known to be highly efficient in minimizing the effects of mistranslation errors and point mutations, since it is known that when an amino acid is converted to another due to error, the biochemical properties of the resulted amino acid are usually very similar to those of the original one. In this study, using altered forms of the fitness functions used in the prior studies, we have optimized the parameters involved in the calculation of the error minimizing property of the genetic code so that the genetic code outscores the random codes as much as possible. This work also... 

The present study aims to challenge the existing finite element models in terms of one of the most important practical parameters, i.e. coverage. Important models from the literature are re-simulated and their resulted treated surfaces are carefully examined. Result of this study shows that existing finite element models could not reflect the realistic coverage. A variable dimension symmetry cell is developed in order to acquire full coverage and at the same time not increasing the computational cost. This model can successfully simulate the surface nanocrystallization by severe shot peening in which the amount of coverage is much higher than conventional shot peening  

Nerve repositioning surgery is one of the treatments chosen for the patients with edentulous posterior atrophic mandible. Like any other treatments, this therapy has its advantages and disadvantages, indications and contraindications. The most important complication of this procedure is neurosensory disturbance. This problem may occur at different stages of the treatment. One common time when nerve damage happens is when the nerve is located outside the canal and drilling and insertion of the implant are performed. Accordingly, this report describes a simple and feasible method to retract and protect nerves outside the canal during the treatment of nerve transposition. This will reduce the... 

Nerve repositioning surgery is one of the treatments chosen for the patients with edentulous posterior atrophic mandible. Like any other treatments, this therapy has its advantages and disadvantages, indications and contraindications. The most important complication of this procedure is neurosensory disturbance. This problem may occur at different stages of the treatment. One common time when nerve damage happens is when the nerve is located outside the canal and drilling and insertion of the implant are performed. Accordingly, this report describes a simple and feasible method to retract and protect nerves outside the canal during the treatment of nerve transposition. This will reduce the... 

Knowing the rate of evaporation from surface water resources such as channels and reservoirs is essential for precise management of the water balance. Few detailed evaporation studies exist for small lakes or reservoirs in arid regions of the world. In this study, monthly evaporation was determined by Bowen Ratio Energy Budget technique (BREB) for Alghadir reservoir (Saveh, Iran) from 1995-2007 and compared with class-A pan. Daily data were obtained from IMO (Iran Meteorological Organization) weather station, located near the reservoir, for all of these years. Some variations have been observed on the estimated evaporation of the energy budget at different years, ranging from 151 cm for 1997... 

Nanocrystalline hydroxyapatite (nHA) of 50 nm average diameter and length to diameter ratio of >3 was synthesized by biomimetic method. Non-isothermal sintering improved densification behavior and mechanical properties of apatite to 0.88 maximum fractional density, 70MPa bending strength, 148MPa compressive strength and 2.53GPa microhardness at sintering temperature of 1250°C. Higher sintering temperatures resulted in the decomposition of the apatite and in-situ biphasic calcium phosphate HAP/TCP formation. This process lowered apatite densification and weakened mechanical properties of the sintered specimen. Transmission electron microscopy (TEM), x-ray diffraction (XRD) and field emission... 

In this paper, distributions of stress and strain components of rotating disks with non-uniform thickness and material properties subjected to thermo-elastic loading under different boundary conditions are obtained by semi-exact methods of Liao's homotopy analysis method (HAM), Adomian's decomposition method and He's variational iteration method (VIM). The materials are assumed to be perfectly elastic and isotropic. A two dimensional plane stress analysis is used. The distribution of temperature over the disk radius is assumed to have power forms with the higher temperature at the outer surface. The results of the three methods are compared with those obtained by Runge-Kutta's numerical... 

Optimized methods for simultaneous removal of nitrate, nitrite and ammonium are important features of nutrient removal. Nitrogen removal efficiency in an intermittently aerated sequencing batch reactor (IA-SBR) with multiple filling events was studied. No external carbon source was added and three filling events were considered. Oxidationreduction potential (ORP) and pH curve at solids retention time (SRT) of 20 d were analyzed. Effects of three organic loading rates (OLR), 0.67, 1.0 and 1.5 kgCOD/m3d, and three nitrogen loading rates (NLR), 0.054, 0.1 and 0.15 kgN/m3d, on nitrogen removal were studied. Nitrate Apex in pH curve and Nitrate Knee in ORP profile indicated that the end of... 

We study photon diffusion in a one-dimensional model foam composed of thin films and Plateau borders. Each thin film or Plateau border is characterized by its own intensity transmittance. We relate | Foam, the transport-mean-free path of photons diffusing in the foam, to the foam microstructure. Denoting by l Film (l PB) the transport-mean-free path of photons in a medium composed only of thin films (Plateau borders), we find 1/ l Foam = φF / l Film + φP / l PB. Here φF and φP =1- φF are the fraction of films and Plateau borders, respectively  

Interactions between P-selectin, expressed on activated endothelium, and its counterpart P-selectin glycoprotein ligand-1 (PSGL-1), expressed on leukocytes, play a pivotal role in adhesive events that recruit circulating leukocytes toward inflamed or injured tissues. Atomistic understanding of the association and dissociation of these bonds under blood flow is necessary to define the underlying mechanism. In this study, steered molecular dynamics (SMD) simulations were applied to investigate the conformational changes of P-LE/SGP-3 construct (an effective binding unit of the P-selectin/PSGL-1 complex) under stretching with constant velocity. In the present simulations, a self-built force... 

In this paper, we propose a new model to evaluate the behavior of cognitive radios (CRs). In this model, we consider a specific number of primary users having independent probabilistic on-off behavior. In addition, a specific number of opportunistic cognitive radios in saturation mode is assumed. We consider contention for CRs in order to occupy an inactive primary channel independently according to a simple MAC scheme. Our model is based on a closed BCMP state-dependent queueing network. We map contention of the CRs and the behavior of primary users on suitable parameters of the queueing network. By solving the network, we obtain the steady state behavior of CRs, then we find the efficient... 

This study evaluates the effectiveness of adsorption process by Granular Activated Carbon (GAC) compared with a novel formulation of coagulation - flocculation process for dye removal from textile wastewater. In this regard, acidic, reactive, disperse and direct red dye are used to prepare the synthetic dye. Dominant wave length for each dye is determined by spectrophotometeric method. Using GAC as adsorbent, equilibrium time and adsorption isotherm of each dye are determined with aid of spectrophotometric method. The results show that GAC can not remove dispersed red dye. Acidic red, direct red and reactive red of 5 mg/L concentration are removed by GAC up to %90, %88 and %43 in 30, 60 and... 

There is a need to find cheaper and simpler techniques for rural water filtration system in developing countries. Using a filter made of blocks for the water treatment enables one to make vertical filters. It is expected that the amount of land utilized would decrease by more than 70 % if vertical filters were used. The operation and washing would be simpler than using horizontal sand filters as filters made of blocks would be used instead. The feasibility study focused on finding adequate materials, compositions and methods of making a block with enough resistance to water pressure, sufficient porosity for water transformation, and using inexpensive, readily available materials. A pilot... 

High molecular mass of naphthalene make it non-biodegradable and the biological methods for treated the pollutant are much time consuming. In this paper, two methods of ozonation and aeration are used to remove naphthalene. Because of the industrial wastewater has a great range of pH, in this study different concentrations of soluble naphthalene are placed in variable pH conditions, different contact times and changes in amount of aeration and ozonation. ANOVA results indicated a significant difference between two methods. The average removal of naphthalene by use of ozonation is 55 % and 37 % for aeration. As results, the best conditions that naphthalene are removed is in acidic environment... 

Methyl Tert-Butyl Ether (MTBE) is an oxygenated organic compound extensively substituted for lead in gasoline worldwide. MTBE can affect human and environment. In this research, biodegradation capability of MTBE by identified indigenous Bacillus cereus strain RJ1 was studied. Obtained results showed that biological removal of MTBE with 200 mg/L samples in 28°C is 27.5% while in 37°C within 120 days reaches to 34%. In addition, biodegradation of Bacillus cereus RJ1 in 500 mg/L and 1,000 mg/L is 28% and 23.9% in 28°C, respectively. Therefore, this bacterium could clean up MTBE from the environment