Sharif Digital Repository

In this paper, we propose utilizing multiple optical phase conjugate (OPC) modules along fiber spans, in order to improve the performance of coherent optical orthogonal frequency division multiplexing (CO-OFDM) communication systems in long-haul fiber-optic channels. The role of OPC in CO-OFDM systems is investigated by formulating the four-wave mixing (FWM) process generated along a CO-OFDM with two and three OPCs. Analytical results reveal that increasing the number of OPC modules reduces the average FWM power along the transmission link and as a result mitigates the degrading effect of interaction between amplified spontaneous emission noise and FWM. The proposed schemes have also been... 

In this paper, a new analytical method is presented that can be used to determine the behavior of particular steel beam-to-column extended end plate connection in linear and nonlinear regions. A common means of forming a rigid joint between a universal beam and column is to weld an end plate to the beam end and then to bolt it to the column. A physically based analytical method that can predict the behavior of bolted and extended end plate eave connections, using the connection dimensions as input, is presented. This article demonstrates an analytical procedure for the establishment of elastic and plastic parts of the M-χ curve of this form of connection. An analytical method is proposed for... 

In this paper, we present a mathematical model for the idea of using more than one optical phase conjugate (OPC) module for coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems in long-haul fiber optic channels. The four-wave mixing (FWM) formulation is derived for three different scenarios in which different numbers of OPC modules are used. The simulation results reveal that using more than one OPC modules leads to a much better BER performance operating on a typical OFDM system  

In this study, the authors evaluate the performance of asynchronous optical multi-carrier code division multiple access (MC-CDMA) for intensity modulated/direct detection systems to be used in next-generation optical access networks. The proposed system employs Gold sequence in frequency-domain to provide asynchronous resource sharing. In long-reach passive optical networks, fibre impairments degradation to the performance of ordinary optical CDMA can be avoided by frequency-domain digital compensation methods in the proposed MC-CDMA. In comparison with orthogonal frequency division multiple access, peak-to-average power ratio in the proposed MC-CDMA is reduced and asynchronous resource... 

In this paper, we present a design methodology with implementational insight and evaluate the performance of a multicarrier code-division multiple access (MC-CDMA) system using intensity modulation/direct detection scheme suitable for an indoor visible light communication (VLC) environment. The proposed system is a CDMA system based on an orthogonal frequency division multiplexing (OFDM) platform. To overcome the light-dimming issue, we use a newly proposed methodology, namely, polarity reversed optical OFDM (PRO-OFDM). A unipolar signal is either added to the minimum current or subtracted from the maximum current in the LED linear current range to provide various amounts of dimming. The... 

Nerve repositioning surgery is one of the treatments chosen for the patients with edentulous posterior atrophic mandible. Like any other treatments, this therapy has its advantages and disadvantages, indications and contraindications. The most important complication of this procedure is neurosensory disturbance. This problem may occur at different stages of the treatment. One common time when nerve damage happens is when the nerve is located outside the canal and drilling and insertion of the implant are performed. Accordingly, this report describes a simple and feasible method to retract and protect nerves outside the canal during the treatment of nerve transposition. This will reduce the... 

Nerve repositioning surgery is one of the treatments chosen for the patients with edentulous posterior atrophic mandible. Like any other treatments, this therapy has its advantages and disadvantages, indications and contraindications. The most important complication of this procedure is neurosensory disturbance. This problem may occur at different stages of the treatment. One common time when nerve damage happens is when the nerve is located outside the canal and drilling and insertion of the implant are performed. Accordingly, this report describes a simple and feasible method to retract and protect nerves outside the canal during the treatment of nerve transposition. This will reduce the... 

Knowing the rate of evaporation from surface water resources such as channels and reservoirs is essential for precise management of the water balance. Few detailed evaporation studies exist for small lakes or reservoirs in arid regions of the world. In this study, monthly evaporation was determined by Bowen Ratio Energy Budget technique (BREB) for Alghadir reservoir (Saveh, Iran) from 1995-2007 and compared with class-A pan. Daily data were obtained from IMO (Iran Meteorological Organization) weather station, located near the reservoir, for all of these years. Some variations have been observed on the estimated evaporation of the energy budget at different years, ranging from 151 cm for 1997... 

In this paper, we propose an iterative block equalizer for long-haul Coherent Optical Orthogonal Frequency Division Multiplexing (CO-OFDM) communication systems. The proposed scheme is based on a soft Minimum Mean-Squared Error (MMSE) iterative block equalizer. Two different channel estimation methods are also discubed. The performance and computational complexity of the proposed iterative equalization and channel estimation techniques are evaluated as well. The obtained Bit Error Rate (BER) performance reveal that the iterative equalizer outperforms the linear equalizers by almost two orders of magnitude  

In this paper, a new algorithm for solving the shortest loop design problem is presented. The shortest loop design problem is to find the shortest loop for an automated guided vehicle covering at least one edge of each department of a block layout. In this paper, first it is shown that this problem can be represented as a graph model. The properties of the presented model enable us to design a meta-heuristic based on ant colony system algorithm for solving the shortest loop design problem. Computational results show the efficiency of our algorithm in compare to the other techniques  

In Cognitive Radio (CR), in order to avoid interference in the Primary Users (PU), some subcarriers need to be deactivated. In systems based on Multicarrier Code Division Multiple Access (MC-CDMA), this causes losing orthogonality among different spreading codes, leading to poor Bit Error Rate (BER) performance. The performance of such system can be improved by using Generalized Hadamard Codes (GHC) instead of conventional Hadamard codes which avoids the loss of orthogonality. This is due to the fact that unlike conventional Hadamard codes, GHC are conjectured to exist for any arbitrary length. In this paper, we propose using a novel spreading code, namely, GHC for synchronous MC-CDMA in CR... 

Motorcycles are the third most common means of transportation in the megacity of Tehran. Hence, measurements of emission factors are essential for Tehran motorcycle fleets. In this study, 60 carburetor motorcycles of various mileages and engine displacement volumes were tested in a chassis dynamometer laboratory according to cold start Euro-3 emissions certification test procedures. For almost all of the tested samples, the average carbon monoxide (CO) emission factors were about seven times higher than the limits for Euro-3 certification. No motorcycle fell within the Euro-3 certification limit on CO emissions. 125 cc engine displacement volume motorcycles, which are dominant in Tehran,... 

Passenger cars (PCs) not only are a major contributor to greenhouse gas (GHG) emissions in Iran but also pose severe energy security challenges due to their dependence on gasoline. This study aimed to understand the future trends of the gasoline demand and GHG emissions from PCs in Iran and assess the effectiveness of mitigation policies. The data were collected from multiple sources and used to develop the survival rate function of PCs. The study used back-calculation to compensate for the short period of stock data availability. The use intensity of PCs was estimated based on the gasoline consumption statistics. Econometric models were developed to project the future PC stock and use... 

Passenger cars (PCs) are a major contributor to urban air pollution, greenhouse gas emissions, and energy security challenges in megacities in developing countries because of their high growth potential. Since the PC fleet changes through time, the projection of air pollutant emissions from PCs is essential for effective emission reduction policymaking. However, the extensive amount of data and proper models are required for this purpose that are not available in many developing countries. Hence, this study develops multiple econometric and emission models and integrate them into a framework to simulate the future stock and activity of PCs and projects PCs’ air pollutants and CO2 emissions... 

As an essential step of product design, tolerance design plays a critical role in reducing manufacturing costs while ensuring mechanical assemblies’ quality and reliability. However, existing tolerance allocation approaches only are concentrated on design specification constraints during the design stage, although component degradation caused by environmental and operating conditions increases the probability of product failure during the service life. To deal with the degradation effect arising over the service life of mechanical assemblies, this paper proposes a reliability-based tolerance design approach to allocate optimal, reliable tolerances to mechanical systems. The proposed approach...