Sharif Digital Repository

One of the important issues in the field of telecommunications is the optimization of coding algorithms. Especially, in the field of the Internet of Things (IoT) due to the low processing power and the limitation in the energy storage of devices, the needs for such optimized algorithms are more essential. One effective method to improve coding algorithms in the transmission of messages is obtained by paying more attention to the amount of information contained in each part of the message and transmit information accordingly. Some coding methods have addressed this issue indirectly, but they do not pay enough attention to this practical issue. Based on the simple but practical idea mentioned... 

During recent years the main concern of analog designers is to get the most use of Computer Aided Design (CAD) tools for design procedures.Thus the main purpose of this thesis is to introduce a very fast and precise CAD tool for the design of pipelined analog to digital converters (ADC). This is accomplished by utilizing some simulation and optimization based CAD tools at the same time. In the optimization part, the conventional numerical methods are replaced with the proposed analytical approaches. Also, anew algorithm is used in the simulation part, which makes the monte-carlo simulation to be faster compared to the conventional cases. To verify the accuracy of CAD tool performance, a... 

One main problem in many numerical simulations is the lack of sufficient infrastructure data to precisely model and analyze the flow through complex geometries. Since experimental procedures are generally very expensive; and sometimes impossible, it becomes necessary to find alternative ways such as numerical approaches to predict the flow behavior through complex geometries. The heat exchangers can be categorized as geometries with complex configuration and apparently expensive to solve numerically. They are widely used in different industries including the aerospace. The restrictions in design and implementation of aviation’s heat exchangers have promoted the related companies to converge... 

The burners studied in the combustion principles have different types due to the configuration of different types of flames, each of them studies a specific phenomenon of combustion, so researchers need to design burners with the ability to: create different types of combustion flow regimes, changing in mixing rate and performance at critical points are felt more and more. This document describes the process of designing and manufacturing a turbulent jet burner with variable mixing ratio and the ability to create a diverse range of flow regimes and different flame configurations. Mixing rate is the most important characteristic in the stability of premixed flames, so the distinctive feature... 

The aim of this project is electrodeposition of Cu/Ni-P multi-layer coating and investigating the nucleation and growth mechanisms of the deposits. To evaluate the effect of the selected bath on the kinetics of the process and deposition, cyclic voltammetry and chronoamperometry studies were conducted and electrodeposition mechanism was obtained three-dimensional instantaneous nucleation and growth controlled by diffusion. Potentiostatic pulse-deposition method with potential steps -0.3 and -1.1 V vs SCE was selected for deposition of Cu/Ni-P multi-layers. In order to demonstrate the effect of monolayer thickness on the properties of the final coating, multiple layers with various monolayers... 

We show evidence of a new mechanism in the lending channel via changes in the exchange rate on the loan supply. Changes in the relative risk or return of banks' balance-sheet items induced by exchange rate fluctuations can modify the level and composition of loans. Using a monthly panel of Iranian banks during 2007-2018, we find that a one percentage point increase in the exchange rate reduces loan supply by 0.05 percentage point. We consider this effect a sign of a change in the supply of loans since banks' responses to the exchange rate fluctuations differ depend on their health conditions. The impact is more remarkable for banks with higher illiquidity, non-performing loans, and foreign... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

With the increasing tendency of consumers to purchase from online stores and the remarkable growth of this industry in recent years, timely and cost-efficient delivery of goods to the final customer has become one of its major challenges. Accordingly, last-mile delivery has attracted significant attention from both researchers and practitioners. This study addresses a vehicle routing problem that considers customers’ ability to pick up their orders from selected centers and their possible presence at different locations within the planning horizon. This thesis aims to enhance customer satisfaction and reduce distribution costs by employing two innovative vehicle routing approaches. The first... 

Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

Light propagation through turbid media, such as biological tissues, experience scattering due to inhomogeneous distribution of refractive indices of their microscopic structure. Scattering and diffusion of light not only limit many optical imaging techniques, but are also big challenges for telecommunication, spectroscopy, and other optical techniques. Recently many new imaging methods are developed that work in strongly scattering media such as optical coherence tomography, diffusion tomography, and laser speckle velocimetry. In this thesis, we have studied how wavefront shaping techniques can tackle the problem of scattering. By spatially shaping the wavefront of the incident beam, using...