Loading...
Search for: hatami--p
0.098 seconds

    Perfect dominating sets in the cartesian products of prime cycles

    , Article Electronic Journal of Combinatorics ; Volume 14, Issue 1 N , 2007 , Pages 1-7 ; 10778926 (ISSN) Hatami, H ; Hatami, P ; Sharif University of Technology
    Australian National University  2007
    Abstract
    We study the structure of a minimum dominating set of C2n+1 n, the Cartesian product of n copies of the cycle of size 2n + 1, where 2n + 1 is a prime  

    A lower bound for the length of a partial transversal in a Latin square

    , Article Journal of Combinatorial Theory. Series A ; Volume 115, Issue 7 , 2008 , Pages 1103-1113 ; 00973165 (ISSN) Hatami, P ; Shor, P. W ; Sharif University of Technology
    2008
    Abstract
    It is proved that every n × n Latin square has a partial transversal of length at least n - O (log2 n). The previous papers proving these results (including one by the second author) not only contained an error, but were sloppily written and quite difficult to understand. We have corrected the error and improved the clarity. © 2008  

    Synthesis and thermogravimetric analysis of inclusion complexes of O2N2-donor Aza-crown macrocyclic ligands with [60]fullerene

    , Article Journal of Thermal Analysis and Calorimetry ; Volume 118, Issue 3 , 2014 , pp 1631-1637 ; ISSN: 13886150 Ghanbari, B ; Gholamnezhad, P ; Hatami, M ; Sharif University of Technology
    2014
    Abstract
    A simple method for the formation of inclusion complex of [60]fullerene with two O2N2-donor aza-crown macrocyclic ligands was introduced. The products were characterized using UV-vis and IR spectroscopies as well as HPLC, and ESI mass spectrometry. The ESI mass and elemental analysis data revealed that the ratio of macroring:[60]fullerene were not the same. The binding capability of the macrorings as well as the number of the macroring addends to [60]fullerene were investigated using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). Considering percentage mass loss in different steps of TG and the enthalpy changes in DSC found for each of these products, the number... 

    Sol-gel synthesis of thermoluminescent Cd-doped ZnTe nanoparticles

    , Article Indian Journal of Pure and Applied Physics ; Volume 53, Issue 12 , 2015 , Pages 804-807 ; 00195596 (ISSN) Shafiee, S ; Akhavan, O ; Hatami, H ; Hoseinkhani, P ; Sharif University of Technology
    National Institute of Science Communication and Information Resources (NISCAIR)  2015
    Abstract
    The Cd (3 wt%)-doped ZnTe nanoparticles with average size of 5 nm and band gap energy of 3.15 eV were synthesized by sol-gel method. The optical properties (such as band gap energy) and the size distribution of the nanoparticles have been investigated by using UV-Vis spectroscopy and transmission electron microscopy, respectively. Then, thermoluminescence property of the nanoparticles exposed to various doses of gamma radiation of Cs137 has been studied. The thermoluminescence glow peak of the nanoparticles showed a displacement from 290 to 230°C by increasing the dose of gamma radiation from 7.5 to 67.5 mSv. The thermoluminescence intensity of the synthesized Cd-doped ZnTe nanoparticles... 

    On the signed edge domination number of graphs

    , Article Discrete Mathematics ; Volume 309, Issue 3 , 2009 , Pages 587-594 ; 0012365X (ISSN) Akbari, S ; Bolouki, S ; Hatami, P ; Siami, M ; Sharif University of Technology
    2009
    Abstract
    Let γs′ (G) be the signed edge domination number of G. In 2006, Xu conjectured that: for any 2-connected graph G of order n (n ≥ 2), γs′ (G) ≥ 1. In this article we show that this conjecture is not true. More precisely, we show that for any positive integer m, there exists an m-connected graph G such that γs′ (G) ≤ - frac(m, 6) | V (G) |. Also for every two natural numbers m and n, we determine γs′ (Km, n), where Km, n is the complete bipartite graph with part sizes m and n. © 2008 Elsevier B.V. All rights reserved  

    Modeling of hot tearing formation during solidification

    , Article Journal of Materials Processing Technology ; Volume 205, Issue 1-3 , 26 August , 2008 , Pages 506-513 ; 09240136 (ISSN) Hatami, N ; Babaei, R ; Dadashzadeh, M ; Davami, P ; Sharif University of Technology
    2008
    Abstract
    A new criterion for the appearance of hot tears in metallic alloys is proposed. This model introduces a critical solid fraction (fcr) to simulate feeding. A hot-cracking sensitivity (HCS) index according to the temperature and solidification time is defined and then is compared with other hot tearing criteria. This new criterion indicates the higher cracking sensitivity for higher casting velocity and higher sensitivity in billet center in the casting and finally the calculated values are in fairly good agreement with the experimental results. © 2007 Elsevier B.V. All rights reserved  

    Hyperthermia response of PEGylated magnetic graphene nanocomposites for heating applications and accelerate antibacterial activity using magnetic fluid hyperthermia

    , Article Applied Physics A: Materials Science and Processing ; Volume 126, Issue 4 , 2020 Hatamie, S ; Shih, P. J ; Soufi Zomorod, M ; Heravi, P ; Ahadian, M. M ; Hatami, N ; Sharif University of Technology
    Springer  2020
    Abstract
    In this research work, graphene/cobalt nanocomposites are functionalized with polyethylene glycol (PEG) to be a platform for theranostics application and antibacterial activity. The non-covalent functionalization of PEG on the surfaces of nanocomposites improved their stability and diminished their cytotoxicity. The PEGylated nanocomposites are demonstrated to allow simultaneous administration of two cancer therapy methods such as magnetic fluids hyperthermia (MFH) which is carried out by converting magnetic energy into heat through ferromagnetic cobalt nanoparticles and heat generation through near-infrared optical absorption by the reduced graphene oxide. A concise simulation is carried... 

    SharifII soccer simulation team

    , Article Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) ; Volume 2019 , 2001 , Pages 437-440 ; 03029743 (ISSN) Habibi, J ; Foroughi, E ; Motamed, M ; Karimian, P ; Hatami, H ; Fardad, H ; Sharif University of Technology
    2001

    , M.Sc. Thesis Sharif University of Technology Hatami, Mojgan (Author) ; Bagherzadeh, Mojtaba (Supervisor)
    Abstract
    Inert gold become catalytically active when dispersed in the form of nanoparticles. Isolated gold nanoparticles have demonstrated high catalytic activity for both oxidation and reduction reactions. In order to obtain high catalytic activity, gold nanoparticles are generally dispersed on support materials, among which oxides are commonly used. However, a substantial decrease in activity and selectivity of the immobilized catalysts is frequently observed due to the heterogeneous nature of these support materials in reaction media. In the course of our study on the metal-based catalysis for synthesis of organic compounds, we herein report that rod-shaped Au nanoparticles in aqua solution... 

    Secure Communication via Cooperation and Cooperative Jamming

    , M.Sc. Thesis Sharif University of Technology Hatami, Mohammad (Author) ; Behroozi, Hamid (Supervisor)
    Abstract
    The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this thesis, the security of two-phase relaying system with multiple... 

    Experimental determination of natural convection heat transfer coefficient in a vertical flat-plate solar air heater

    , Article Solar Energy ; Volume 82, Issue 10 , 2008 , Pages 903-910 ; 0038092X (ISSN) Hatami, N ; Bahadorinejad, M ; Sharif University of Technology
    2008
    Abstract
    In this study, natural convection heat transfer in a vertical flat-plate solar air heater of 2.5 m height and 1 m width, with one- and two-glass covers was studied experimentally. Totally six cases of airflow (two for air heater with one glass cover and four for air heater with two-glass covers) were considered. These cases included states that air could flow within spaces between absorber plate and glass covers or air was enclosed in such spaces. Absorber plate temperature, back-plate temperature, glass cover temperatures, mass flow rates of air within channels and the solar radiation were measured. The following relations are suggested:. For channels in which air could flow:Nu = 0.7362... 

    On the computational complexity of defining sets

    , Article Discrete Applied Mathematics ; Volume 149, Issue 1-3 , 2005 , Pages 101-110 ; 0166218X (ISSN) Hatami, H ; Maserrat, H ; Sharif University of Technology
    2005
    Abstract
    Suppose we have a family F of sets. For every S∈F, a set D⊆S is a defining set for (F,S) if S is the only element of F that contains D as a subset. This concept has been studied in numerous cases, such as vertex colorings, perfect matchings, dominating sets, block designs, geodetics, orientations, and Latin squares. In this paper, first, we propose the concept of a defining set of a logical formula, and we prove that the computational complexity of such a problem is Σ2-complete. We also show that the computational complexity of the following problem about the defining set of vertex colorings of graphs is Σ2-complete: INSTANCE: A graph G with a vertex coloring c and an integer k.QUESTION: If... 

    On the complexity of the circular chromatic number

    , Article Journal of Graph Theory ; Volume 47, Issue 3 , 2004 , Pages 226-230 ; 03649024 (ISSN) Hatami, H ; Tusserkani, R ; Sharif University of Technology
    Wiley-Liss Inc  2004
    Abstract
    Circular chromatic number, χc is a natural generalization of chromatic number. It is known that it is NP-hard to determine whether or not an arbitrary graph G satisfies χ(G)= χc(G). In this paper we prove that this problem is NP-hard even if the chromatic number of the graph is known. This answers a question of Xuding Zhu. Also we prove that for all positive integers k ≥ 2 and n ≥ 3, for a given graph G with χ(G)= n, it is NP-complete to verify if χc(G)≤ n -1/k. © 2004 Wiley Periodicals, Inc  

    A streaming algorithm for 2-center with outliers in high dimensions

    , Article Computational Geometry: Theory and Applications ; Volume 60 , 2017 , Pages 26-36 ; 09257721 (ISSN) Hatami, B ; Zarrabi Zadeh, H ; Sharif University of Technology
    2017
    Abstract
    We study the 2-center problem with outliers in high-dimensional data streams. Given a stream of points in arbitrary d dimensions, the goal is to find two congruent balls of minimum radius covering all but at most z points. We present a (1.8+ε)-approximation streaming algorithm, improving over the previous (4+ε)-approximation algorithm available for the problem. The space complexity and update time of our algorithm are poly(d,z,1/ε), independent of the size of the stream. © 2016 Elsevier B.V  

    Axial Flow Compressor's Optimization

    , M.Sc. Thesis Sharif University of Technology Hatami, Mansour (Author) ; Hajilouy Benisi, Ali (Supervisor)
    Abstract
    Improvement of axial flow compressor is usually goal of manufacturers of these equipments. Because basic role of it in gas turbine efficiency too many researchers have effort to know phenomenon and effect of them on axial flow compressor's revenue and optimization of them. In this project the aerodynamic of axial flow compressor studied and effect of important parameters such as diffusion factor coefficient, optimum incidence angel and Mach and Reynolds number determined from text and papers. Then obtained a model from experimental data to determine shock loss and extended algorithms to specify critical Mach number and chocking mass flow. With quotation Craig and Cox method we determined a... 

    Feasibility Study of WIMAX in Access Network

    , M.Sc. Thesis Sharif University of Technology Hatami, Parastou (Author) ; Safaieh, Mohammad Reza (Supervisor)
    Abstract
    Nowadays in Iran service providers, are using copper lines in access networks. They rent these lines from a governmental telecommunication company during a complicated and time consuming process. In this thesis, the most common access technologies have been analyzed in order to find an alternative solution for copper lines. Based on the studies in this thesis, it is clear that Wimax technology can be an appropriate solution comparing with Wi-Fi and 3G from the point of quality and speed. The UNIDO methodology has been used in this economical assessment (feasibility study). In this methodology, all the running and fixed costs and revenue as well, have been estimated. In the next step,... 

    PMU-Based Identification and Analysis of Power System Low-Frequency Electromechanical Oscillations Using Ringdown Data

    , M.Sc. Thesis Sharif University of Technology Hatami, Mohammad Reza (Author) ; Parniani, Mostafa (Supervisor)
    Abstract
    Poorly damped Low Frequency electromechanical Oscillations (LFOs) confine the capability of power system transmission lines. This phenomenon, which is the result of dynamic interactions among generator groups, may make the system prone to small- signal instability in some cases. Due to the use of some system controllers such as AVRs, these oscillations are inevitable.
    Hence, electromechanical modes detection and assessing stability margin are important requirement in power system planning and operation, and can provide significant help to power system operators by preventing stability problems.
    From the distant past, in order to monitor small-signal stability, power system operators... 

    Design of a fault tolerated intelligent cntrol system for a nuclear reactor power control: Using extended Kalman filter

    , Article Journal of Process Control ; Vol. 24, issue. 7 , 2014 , pp. 1076-1084 ; ISSN: 09591524 Hatami, E ; Salarieh, H ; Vosoughi, N ; Sharif University of Technology
    2014
    Abstract
    In this paper an approach based on system identification is used for fault detection in a nuclear reactor. A continuous-time Extended Kalman Filter (EKF) is presented, which allows the parameters of the nonlinear system to be estimated. Also a fault tolerant control system is designed for the nuclear reactor during power changes operation. The proposed controller is an adaptive critic-based neuro-fuzzy controller. Performance of the controller in terms of transient response and robustness against failures is very good and considerable  

    Design of a fault tolerated intelligent control system for load following operation in a nuclear power plant

    , Article International Journal of Electrical Power and Energy Systems ; Volume 78 , 2016 , Pages 864-872 ; 01420615 (ISSN) Hatami, E ; Vosoughi, N ; Salarieh, H ; Sharif University of Technology
    Elsevier Ltd  2016
    Abstract
    Fault detection has always an important role in maintaining the system stability and assuring satisfactory and safe operation. In this paper a method based on system identification is used for fault detection on a nuclear reactor. The combination of Extended Kalman Filter and recursive Least Square are used to identify the system parameters. Another goal of this paper is design of a fault tolerant control system for a nuclear reactor during power change operation. The proposed controller is an adaptive neuro-fuzzy controller based on emotional learning. Performance of the controller in term of transient response and robustness against failure is very good and outstanding  

    A non-stationary analysis of low-frequency electromechanical oscillations based on a refined margenau-hill distribution

    , Article IEEE Transactions on Power Systems ; Volume 31, Issue 2 , 2016 , Pages 1567-1578 ; 08858950 (ISSN) Hatami, M ; Farrokhifard, M ; Parniani, M ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2016
    Abstract
    This paper focuses on the use of quadratic time-frequency distributions (QTFDs) to characterize the temporal variation of low-frequency electromechanical oscillations (LFEOs) using ringdown data. A refined Margenau-Hill distribution (MHD) and a procedure to extract the instantaneous frequencies and damping factors as well as initial phase angles of system low-frequency modes when the analyzed signal is multi-component are proposed. The refinement process enjoys a fast-converging iterative algorithm and without loss of generality it can be applied to other QTFDs for using in other applications. A non-stationary synthetic signal as well as simulated ringdown data of a 5-area, 16-machine power...