Sharif Digital Repository

A high performance asymmetric supercapacitor (ASC)has been fabricated by using nickel oxide-cobalt oxide nanosheets (NiO–CoO NSs), which were directly grown on carbon nanotubes (CNTs)and hydrothermal carbon spheres (HTCs)as positive and negative electrodes, respectively. Both electrode materials are binder-free prepared by using a catalytic chemical vapour deposition (CVD)approach followed by a facile hydrothermal method for cathode and a one-step environmental-friendly route called hydrothermal carbonization for anode. Using NiO–CoO NSs@CNTs and HTCs, which were directly grown on Ni foam, not only leads to a very small equivalent series resistance, but also provides an impressive capacitive... 

The development of high performance supercapacitors with high energy densities without sacrificing power densities has always been at the leading edge of the emerging field of renewable energy. Herein, the design and fabrication of innovative high performance binder-free electrodes consisting of coiled carbon nanotubes (CNTs) and biomass-derived hydrothermal carbon spheres (HTCSs) as, respectively, positive and negative electrodes is reported. High performance asymmetric supercapacitors (ASCs) were developed using novel 3D core/shell-like binary Ni-Co oxide (NCO) decorated coiled CNTs directly grown on Ni nano-cone arrays (NCAs) and HTCSs directly deposited on NCAs. Novel 3D structures of... 

Imidazolium-based ionic liquids (ILs) have been perceived as a promising candidate for bridging polyaniline (PANI) on well-dispersed carbon nanotubes (CNTs) via formation of IL-stabilized multiwalled carbon nanotubes (MWCNTs) dispersion in which outer walls of CNTs, as well as benzene rings of the aniline monomer and the growing polymer, have been potently effective in such procurement. The sulfonated water-soluble PANI-[C16C1im]Cl-MWCNT nanocomposites (SPANI-IL-MWCNTs) are directly deposited on a graphite-based current collector using a simple and cost-effective electrophoretic deposition (EPD) method. The SPANI-IL-MWCNT electrodes exhibit remarkable electrochemical performance compared to... 

Development of renewable energies is in parallel with improving high-performance energy storage devices, which can store maximum solar or wind energy and power. Herein, asymmetric energy storage systems are constructed from phosphorus-doped nickel sulfide (P-doped NiS) and biomass-derived humic acid (HA) as positive and negative electrodes, respectively. Initially, nickel sulfide (NiS) nanostructures are directly grown onto nickel foam (NF) via a hydrothermal step. P-doping into the NiS bulk is carried out through a simple hydrothermal process as well. Also, HA is activated via carbonization treatment (A-HA) for employing as the negative electrode's active material. The P-doped NiS-NF... 

We hereby demonstrate symmetric and asymmetric supercapacitors (SSCs and ASCs) based on core/shell-like Ni-Co oxide@cotton//Fe2O3-carbon nanotubes@cotton that are capable of storing a remarkable amount of energy, while retaining a high power density and long cycle life. Hierarchical, porous structures of Ni-Co-O nano-rod (NR) decorated Pd-activated cotton fibers (CFs) were fabricated using an eco-benign hydrothermal method and directly used as the cathode of the supercapacitors. Fe2O3-single-wall carbon nanotube (SWCNT) decorated CFs were employed as anodes of the fabricated ASCs. The assembled Ni-Co-O@cotton//Fe2O3-SWCNTs@cotton based ASCs possessed the benefits of a relatively high energy... 

High-performance textile-based energy storage systems with high energy and power densities alongside remarkable cyclic life are always at the leading edge of wearable electronics. Herein, commercial cotton fabrics (CCFs) are used as the substrates for the fabrication of ultra-light, high-performance wearable supercapacitors. Hierarchical microstructures of nickel-cobalt sulfide (Ni-Co-S) decorated single-walled carbon nanotubes (SWCNTs) are used as the positive supercapacitor electrodes. Enhanced electrochemical performance with a specific gravimetric capacity of 331 Cg−1 (at a current density of 0.3 Ag−1) is obtained from these Ni-Co-S@SWCNT@CCF electrodes. Besides, composites of graphene... 

High-performance supercapacitors that merit superior power and energy densities, as well as long-term cycle durability are always of great significance as a building block of energy storage devices. Herein, an innovative strategy is developed to design hierarchical and unique porous structures of ternary metal sulfide nano-flake decorated porous hydrothermal carbon microspheres. Hierarchical microspheres of ternary zinc-cobalt sulfide nanosheet (NS) decorated biomass derived hydrothermal carbon spheres (HTCSs) are directly employed as the positive supercapacitor electrodes. In addition, composites of pyrolyzed polyaniline nanotubes (PPNTs) and iron oxide, receiving advantages from highly... 

Flexibility and human-body compatibility have been emerged through the use of commercial fabrics (CFs) in designing wearable non-enzymatic glucose sensing platforms. In this work, electrodes fabricated through direct synthesis of ternary nickel–cobalt sulfide nanostructures (Ni-Co-S NSs) on the CFs (Ni-Co-S@CFs) using a fast and facile one-step microwave-assisted method for this purpose. Fabrication was followed by the structural and electrochemical characterization of the electrodes. The glucose-sensing ability of the prepared wearable electrodes was investigated via cyclic voltammetry (CV) and amperometry techniques in alkaline media. Two linear-responses in wide detection ranges of... 

Progression in the renewable energy field is tied to the development of high-performance energy storage devices with superior power and energy densities. Herein, an innovative material design was employed to prepare binder-free nickel-cobalt sulfide (NCS) on niobium pentoxide (Nb2O5)-decorated carbon spheres (CSs). Initially, CSs were directly grown on nickel foam (NF) via a hydrothermal carbonization approach. Core/shell-like NCS@Nb2O5@CS-NF was then synthesized through a hydrothermal process, followed by an electrodeposition process. When employed as an electrode material, NCS@Nb2O5@CS-NF achieved an excellent volumetric capacity of 9300 C L−1 at a current density of 18 A L−1. Later, an... 

In this paper, we propose and compare various approaches of feature and decision fusion for human action classification in a multi-view framework. The key difference between the employed methods is in the nature of extracted features in each view and the stage we fuse data from all cameras to classify the activity. At the feature extraction stage we utilize three different methods. At the decision making stage, the features obtained by the cameras are combined in a single classifier, or a classifier for each camera produces a local decision which is combined with decisions from other cameras for a global decision. We have employed our method on a fall detection dataset, and all the fusion... 

The basic goal of this article is to present an abstract system-theoretic approach to morphological filtering and the theory of translation invariant systems which is mainly based on residuated semigroups. Some new results as well as a number of basic questions are also introduced  

In a previous paper we introduced a generalized model for translation invariant (TI) operators. In this model we considered the space, φ of all maps from an abelian group G to ω U {-∞}, called LG-fuzzy sets, where ω is a complete lattice-ordered group; and we defined TI operators on this space. Also, in that paper, we proved strong reconstruction theorem to show the consistency of this model. This theorem states that for an order-preserving TI operator Y one can explicitly compute Y(A), for any A, from a specific subset of φ called the base of Y. In this paper duality is considered in the same general framework, and in this regard, continuous TI operators are studied. This kind of operators... 

We consider translation invariant (TI) operators on Φ, the set of maps from an abelian group G to Ω ∪ {−∞} , called LG-fuzzy sets, where 0 is a complete lattice ordered group. By defining Minkowski and morphological operations on Φ and considering order preserving operators, we prove a reconstruction theorem. This theorem, which is called the Strong Reconstruction Theorem (SRT), is similar to the Convolution Theorem in the theory of linear and shift invariant systems and states that for an order preserving TI operator Y one can explicitly compute Y ( A ), for any A , from a specific subset of Φ called the base of Y . The introduced framework is a general model for the theory of translation... 

The main goal of this paper is to verify classical properties of morphological operators within the general model of translation invariant (TI) systems. In this model, TI operators are defined on the space of LG-fuzzy sets Φ i.e. Φ = {A: G → Ω ∪ {− ∞}} in which G is an abelian group and Ω is a complete lattice ordered group. A TI operator Y is an operator on Φ which is invariant under translation on G and Ω as groups. We consider the generalization of Minkowski addition (D on Φ and we emphasize that (Φ,⊛) is an involutive residuated topological monoid. We verify all properties of traditional (set-theoretic) morphological operators as well as classical representations (Matheron, 1967) for... 

Let G be a simple undirected uniquely vertex k-colorable graph, or a k-UCG for short. M. Truszczyński [Some results on uniquely colorable graphs, in Finite and Infinite Sets, North-Holland, Amsterdam, 1984, pp. 733--748] introduced $e^{^{*}}(G)=|V(G)|(k-1)-{k \choose 2}$ as the minimum number of edges for a k-UCG and S. J. Xu [J. Combin. Theory Ser. B, 50 (1990), pp. 319--320] conjectured that any minimal k-UCG contains a Kk as a subgraph. In this paper, first we introduce a technique called forcing. Then by applying this technique in conjunction with a feedback structure we construct a k-UCG with clique number k-t, for each $t \geq 1$ and each k, when k is large enough. This also...