Sharif Digital Repository

The combined effects of climate change and growing water demand due to population growth, industrial and agricultural developments cause an increase in water scarcity and the subsequent environmental crisis in river basins, which results in conflicts over the property rights and allocation agreements. Thus, an integrated, sustainable and efficient water allocation considering changes in water resources due to climate change and change of users’ demands is necessary. In this study, the drainage basin of Zarinehrood was chosen to evaluate the function of selective methods. Assessing climate change impact scenarios of the Fifth IPCC reports, e.g., RCP2.6, RCP4.5, RCP6.0 and RCP8.5, have been... 

Position sensors are essential in the control of moving systems. Variable Reluctance (VR) resolvers are used as position sensors in the control of permanent magnet motors due to their simple and robust structure. VR resolvers can be built in outer/inner stator configuration. Although most of the commercial VR resolvers have outer stator /inner rotor configuration, the manufacturing process of the inner stator resolver is much simpler than that of outer stator ones. However, design considerations of inner stator/outer rotor configurations are not well established. Therefore, in this paper the influence of different number of stator slots, pole number of windings, and number of rotor saliency... 

Functionally graded material shafts are the main part of many modern rotary machines such as turbines and electric motors. The purpose of this study is to present an analytical solution of the elastic-plastic deformation of functionally graded material hollow rotor under a high centrifugal effect and finally determine the maximum allowed angular velocity of a hollow functionally graded material rotating shaft. Introducing non-dimensional parameters, the equilibrium equation has been analytically solved. The results for variable material properties are compared with the homogeneous rotor and the case in which Young’s modulus is the only variable while density and yield stress are considered... 

The learning effects of the workers and machine deterioration in an aggregate production planning (APP) problem have not been taken into account in the literature yet. These factors affect the performance of any real-world production system and require attention. In this paper, a bi-objective optimization model is developed for an APP problem with labor learning effect and machine deterioration. The first objective of this model maximizes the profit by improving learning and reducing the failure cost of the system. The second objective function minimizes the costs associated with repairs and deterioration, which depend on the failure rate of the machines in the production periods. The aim of... 

There is no simple definition of sexism, but it can be described as prejudice, stereotyping, or discrimination, especially against women, based on their gender. In online interactions, sexism is relatively rare but still harmful. One out of ten American adults says that they have been harassed because of their gender and have been the target of sexism, so sexism is a growing issue. The Explainable Detection of Online Sexism shared task in SemEval-2023 aims at building sexism detection systems for the English language. In order to address the problem, we use large language models such as RoBERTa and DeBERTa. In addition, we present a novel method called Random Layer Adversarial Training... 

Storage conditions seem to be important in the long-term stability of nanoparticles (NPs). This work studies the effects of surfactants and storage container on particle size distribution and zeta potential during long-term storage of acid hydrolyzed potato starch NPs. The NPs were prepared from potato starch using acid hydrolysis and high-intensity ultrasonication. During the ultrasonic treatment, the surfactants were added dropwise to the solutions to reduce the size and stabilize the formed NPs. Particle size distribution, zeta potential, and FE-SEM were used to characterize the ensuing NPs. Additionally, a 5-month stability study was performed to evaluate the maintenance of potato starch... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50...