Sharif Digital Repository

This paper has investigated the performance of a linear, 6H-SiC high power photoconductive semiconductor switch. A three-dimensional device modeling with SILVACO ATLAS tools was used to model the optically initiated 6H-SiC switch. The 6H-SiC PCSS device is designed in a rear-illuminated, radial switch structure. The material properties of vanadium compensated 6H-SiC PSCC have been analyzed for breakdown, photocurrent profile such as rise and fall time in terms of their applications as a photoconductive switch at high bias conditions. This structure and also new type of illumination extends the blocking voltage by reducing the peak electric field near electrodes. In this presentation the... 

In the initial recovery stage, only 5 to 15% of hydrocarbons can be extracted from oil reservoirs, so it is necessary to supply energy from an external reservoir or to use advanced solutions to increase oil recovery. By using secondary recovery method and flooding, greater amount of oil can be extracted. In this study, a new procedure of flooding using nanofluid was simulated. The nanofluid and source rock were modeled as a single phase and heterogeneous porous media, respectively. The geometry was considered as a two-dimensional rectangular area. Two phase Darcy equations and mass transfer equations were utilized to simulate this process. Moreover, the effects of different volume fractions... 

By reducing the exploration of new oil reservoirs, enhanced oil recovery from previous oil reservoirs is a solution to supply energy demand. In order to develop the production, various technologies and methods have been proposed such as steaming, direct heating, flooding by nano-fluid, chemical injection, polymer injection and etc. In the present study, nanofluid flooding has been attempted on a rock reservoir with incomplete cone geometry and its performance has been evaluated on oil recovery. The porous media is considered heterogeneous in simulation in accordance with oil reservoirs. The heterogeneous geometry considered in this study is incomplete cone that is heterogeneous in a random... 

In this study, flooding of oil reservoir by implementing Nanoscale colloidal solutions as a working fluid is simulated. All oil reservoirs are heterogeneous porous media; therefore, in this investigation for more accurate prediction of the problem, the porous media is considered heterogeneous. The governing equations of this problem are solved by finite element method (FEM). Moreover two-phase equations of Darcy and mass transfer equations are used. In this paper, the effect of temperature and volume fractions of nanoparticles on the rate of oil recovery is investigated. The SiO2, Al2O3, and CuO nanoparticles are used in the enhanced oil recovery (EOR) process. Also, in order to solve the... 

In the present study, we try to numerically simulate the nanofluid flooding method, which is one of the newest methods in this field. For this purpose, the nanofluid is considered as a single phase fluid that enters the porous petroleum reservoir containing oil. Since all porous petroleum reservoirs are heterogeneous, the porous grid is also considered heterogeneous and is solved using the finite element numerical method. The geometry considered in this study is a two-dimensional anticline medium that is heterogeneous. In this study, the effect of using different volume fractions of nanoparticles in nanofluid is studied. Capillary pressure or diffusion are considered in simulation and their... 

In this paper, the effect of radial structure on the performance of a linear-lateral GaAs high power photoconductive semiconductor switch (PCSS) is investigated. For this purpose a three-dimensional device modeling is used to model the optically initiated GaAs switch. In this simulation a p-type device with carbon as shallow acceptor is compensated by deep donor EL2 level as a trap level. The PCSS device is designed in a back-triggered, radially symmetric switch structure which extends the blocking voltage by reducing the peak electric field near the electrodes. Device modeling was performed and the effect of different trap concentrations on dark I-V characteristics has been investigated. In... 

In this paper characteristics of a linear, 6H-SiC photoconductive semiconductor switch are presented. The vanadium-doped semi-insulated 6H-SiC PCSS device is designed in a back-triggered, radial switch structure. For this purpose, three-dimensional (3D) device modeling tool was used to model and test the optically initiated 6H-SiC switch. Dark I-V characteristic results show that newly proposed rear-illuminated radial switch structure extends the blocking voltage by reducing the peak electric fields near electrodes. Also this radial structure has higher dark resistance as compared to the previous 6H-SiC PCSS experimental results. The ON-state characteristics of vanadium compensated 6H-SiC... 

According to Arthur (2006, p. 200), “Through the use of literature, a language learning experience might become at the same time a source of immediate pleasure and satisfaction for the student. This possibility makes literature an appealing teaching device for ESL teachers”. However, numerous factors may contribute to the teachers’ lack of interest in using literary texts as a teaching tool. This study was an attempt to investigate Iranian EFL teachers’ attitude toward using literature in language classes and their perception toward the probable reasons of some teachers’ lack of interest in doing so. Altogether forty-four language teachers (19 females and 25 males, with a mean age of 26)... 

In this study, the inclusion of multi-walled carbon nanotubes as the second phase in the hydroxyapatite matrix, in order to improve the mechanical strength, has been performed via the sol-gel process. The stability of carbon nanotube sol with the changes of pH and dispersant values (sodium dodecyl sulfate) was evaluated by zeta potential analysis. The results indicated that synthesis of hydroxyapatite particles in the presence of the carbon nanotubes had the best result in homogenization of the carbon nanotube dispersion and faster crystallization of hydroxyapatite. The crystallization of hydroxyapatite phase was investigated with differential scanning calorimetry (DSC) and X-ray diffraction... 

The unwanted effects of diffraction and defocus aberration in three-dimensional integral imaging are taken into account by using the Fourier optics approach. The concepts of point spread function and optical transfer function widely in use for conventional two-dimensional imaging are generalized and applied to three-dimensional integral imaging systems. The effects of diffraction and defocus aberration are then studied and the performance of the conventional single lens imaging system is compared against that of the integral imaging  

High temperature shape memory NiTiHf thin films with varying hafnium contents up to 28.7 at.% were fabricated by DC magnetron sputtering using simultaneous sputter deposition from separate elemental targets. The required film composition was achieved by adjusting the power ratio to the targets. The as-deposited films were amorphous; a post deposition annealing was performed at 550 °C to crystallize the films. Two-micron thick films were characterized by energy dispersive spectroscopy in a scanning electron microscope, temperature controlled X-ray diffraction, differential scanning calorimetry, and atomic force microscopy. The results showed that above 10 at.% Hf additions the transformation... 

Consider Myerson's optimal auction with respect to an inaccurate prior, e.g., estimated from data, which is an underestimation of the true value distribution. Can the auctioneer expect getting at least the optimal revenue w.r.t. the inaccurate prior since the true value distribution is larger? This so-called strong revenue monotonicity is known to be true for single-parameter auctions when the feasible allocations form a matroid. We find that strong revenue monotonicity fails to generalize beyond the matroid setting, and further show that auctions in the matroid setting are the only downward-closed auctions that satisfy strong revenue monotonicity. On the flip side, we recover an approximate... 

In recent years, subsidy payment has been made a main challenge for governments due to growth of population and energy price in global markets. Targeted subsidy plan has been implemented in Iran since last year, and this article discusses its effects on costs and revenues of Tehran Electricity Company as one of the major subdivisions of Iran's electricity industry. In the new system, structural changes have been made in electricity tariffs, so it is not possible to predict the future trends in electricity consumption only based on the past consumptions. In order to model the decision making structure in the recent conditions, a system dynamics method is applied. In addition to modeling the...