Sharif Digital Repository

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel... 

Nowadays, one of the problems of network designers and users is the correctness of network equipment functionality. Since routers play an important role in information transfer between various networks and communicate with each other through a routing protocol, any violation of such protocol can result in the network's failure or defective transfer of data. Thus, being assured of the conformance of the implemented protocol in a router with what has been defined in the protocol's standard is of great significance. To this end, before using or exposing a router, network equipment testers should run protocol conformance tests on it and insure its correct functionality. This brings up the... 

In order to increase the network performance, to discover network security threats, to guarantee the quality of services, to simulate networks and develop new network protocols, network designers and operators need software tools to analyze the network traffic. The first step to do this analysis is network monitoring. This can be done by using various software and hardware tools.
In this research we developed a tool which analyzes the network traffic using appropriate statistical methods. The models which are analyzed in this application are: Poisson, Self-similar and Weibull. This application analyzes the network traffic based on this statistical models and calculates their parameters.... 

The increasing number of road accidents and fatalities have yielded the introduction of several solutions by related industries such as automobile manufacture. Proposed solutions can be classified into two categories: passive, such as airbags, and active such as ABS ad ITS-based technologies. Inter vehicles communication let the communication between vehicles(V2V) or between vehicles and road infrastructure (V2I) by relying on DSRC technology and standards. Intelligent Transportation System (ITS) has three main types of applications namely safety, traffic and commercial. Safety applications are the main goal of vehicular communication, and real time guarantee in safety applications is so... 

In real-time systems, jobs that miss their deadline are considered worthless or ineffective. Nowadays, real-time applications (such as multimedia) that communicate through software-defined networks (SDN) are widely used and will continue to expand in the future. SDN is an emerging network architecture in which control plane is separated from data plane to manage it directly. In this research, we make changes to the controller and the switch used in such network to deliver real time packets or real-time flows (such as video) on time, as much as possible. As missed deadline packets are worthless and they waste bandwidth, dropping them is a solution. Moreover, the controller can drop flows that... 

Shot peening is a cold-working process commonly used in industry to improve the fatigue performance, stress corrosion resistance and surface nano-crystallization of metallic parts. This process extends fatigue life via two mechanisms: Preventing the crack growth due to compressive residual stresses and, preventing the crack initiation because of increased material hardness. These mechanisms are the results of the bombardment of the component's surface with small spherical particles. In this research, an analytical model is developed for estimating the residual stress distribution induced by shot peening process. The modifications of the developed analytical model are related to... 

Nowadays, the significance of securing data and information is undeniable. Cryptography is being used to provide data security. In addition, cryptanalysis is required to evaluate the effectiveness of cryptography methods, and hence, it is an essential concept for securing data. In general, the cryptography functions shall be designed in a way to impose a high load of time-intensive operations to prevent an adversary from accessing the main data from the encrypted data. As a result, cryptography and cryptanalysis algorithms need high performance computations. So far, a number of methods have been proposed to support the required performance. These methods include: distributed computing and... 

Congestion is an important issue in the network environment. To keep stable the perfor-mance of the network, congestion control algorithms have been extensively studied. Queue management method employed by the routers is one of the important issues in the congestion control study. Active Queue Management (AQM) has been proposed for early detection of congestion inside the network. AQM mechanisms control the queue length in a router by dropping arriving packets. The Random Early Detection (RED) is the most popular AQM mechanism used in routers on the Intenet to allow network users to simultaneously achieve high throughput and low average delay. The RED algorithm may cause heavy oscillation of... 

Nowadays, information gathering based on wireless sensor network (WSN) has formed various applications and it also seems to be spreading more in future. Wireless sensor network, is a network composed of multiple nodes, without any infrastructure, each having one or more sensors, wireless communications unit, processing unit, memory, and power supply. Memory capacity, computation power, and power supply are usually considered as valuable resources and limited in nodes. Most of sensor nodes are located in a dense mode and they are susceptible to failure. Therefore network topology may vary dynamically. A sensor network can support real-time communications independent of its type of structure... 

The aim of this research is to fabricate Mg based nanocomposite by friction stir processing and investigation of the process parameters on the microstructure and mechanical properties of the nanocomposite. In order to this aim, alumina nanoparticles as reinforcement were poured in the groove, with 5mm depth, and due to rotation of friction stir tool, these nanoparticles were mixed with the matrix and nanocomposite was produced. To reach to the best condition in nanocomposite fabrication, the effect of friction stir processing parameters such as, tool rotation speed, tool design, number of friction stir passes, cooling media and reinforcement percent on microstructure, hardness, tensile... 

With prominent features such as lower power consumption, shock resistance, and smaller size, SSDs are widely being used in portable applications. In addition, SSDs are becoming more popular in data storage systems and servers due to their even access and fast response time. Several efforts have been made in the past few years to improve the performance of SSDs. One common technique to improve performance is designing an Input/Output (IO) scheduler based on SSD organization.
In this thesis, we propose an IO scheduling algorithm to improve both performance and endurance of SSDs. Since in-place update is not allowed in flash chips, erasure before any data overwriting is required. As... 

Protocol identification and reverse engineering have recently received much attention due to their importance in many communication and security applications. In this field, the main challenges are: protocol identification, clustering unknown protocols, extracting protocol fields, and finding the protocol format based on these fields and their relations. Most of the proposed methods for the first two parts (protocol identification and clustering) use machine learning and AI techniques. For the last part, some bioinformatics techniques like sequence alignment algorithms are used. In this thesis, after reviewing different methods for protocol identification and reverse engineering, some... 

Generating realistic network traffic serves capacity planning, traffic engineering, understanding internet service performance and anomaly detection. A useful traffic generator must generate characteristics in flows and packets, and add known internet anomalies to legitimate traffic. In this dissertation, we develop a tool for generating realistic and anomalous traffic. This generator can generate traffic in a scalable, reproducible and stochastic manner. Two methods are proposed for this purpose. In the first method, the traffic is generated according to statistical distribution of packets and flow charactristics. In the second method, traffic is generated by modeling the behavior of... 

Many congestion control protocols proposed so far to alleviate the problems encountered by TCP protocol in high-speed networks and wireless links have to estimate the parameters of the network. For example, the TCP WESTWOOD congestion window is adjusted based on available bandwidth estimation, or TCP Vegas detects the congestion status based on RTT (Round Trip Time) estimation, and XCP protocol operates according to network traffic load. In this paper, we proposed a novel estimation algorithm that is based on burst identification techniques in router. we show through analysis and simulation that during burst periods this method can estimate the congestion window size of the specific flow...