Sharif Digital Repository

During the production of crude oil from reservoirs, the production of quantities of formation water along with this oil, causes the crude oil does not have the necessary indicators for transportation, refining and ultimately export. The presence of water and salt along with crude oil causes corrosion of refinery and transmission equipment and makes oil unfavorable in terms of economic efficiency (both for domestic use and for export). water and salt produce stable emulsion with oil that can be stable for a long time and can not be easily separated from crude oil. Therefore, separation of water and salt from crude oil is one of the most important issues in the oil industry. Breaking this... 

In 2009, a general equation of state (EOS-III) based on an effective near-neighbor pair interaction of an extended Lennard-Jones (3, 6, 12) type has been introduced as : , where is the compressibility factor, p and ρ stand for pressure and molar density , respectively, T is Temperature , and e, f and g are the temperature dependent coefficient of the equation of state . the Z_th and Z_in are the thermal and internal contributions of pressure in the compressibility factor, respectively. this equation of state gives a good description of all types of nano- and bulk –solid and bulk fluid at entire temperature and pressure ranges for which thee is experimental data. Investigation show that... 

The rise in carbon dioxide levels has led to the manifestation of numerous environmental challenges. Currently, the absorption and conversion of carbon dioxide into valuable fuel resources such as synthetic gas, methane, and ethylene are deemed crucial from both environmental and economic standpoints. Despite the presentation of photocatalysts such as titanium oxide and electrocatalysts such as copper, silver, and zinc, their efficiency in CO2 conversion is found to be insufficient. One potential solution to this problem is the utilization of photoelectrocatalytic CO2 recovery. In this study, the aim was to enhance the photoelectrocatalytic reduction of CO2 by designing and manufacturing... 

Preformed particle gels (PPGs) due to its advatantage over commonly used in situ gels has been successfully applied for controlling excess water production in mature oil reservoirs. Field results of using PPGs in oil fields shows that commonly used PPGs are highly sensitive to hard reservoir conditions such as high temperature and salinity and can not effectively block fractures and high permeability layers.Objects of this study are synthesis and evaluating performance of this novel polymer based hydrogel in oil reservoirs with high temperature and salinity. Central composite design ( which is a experiment design approach) was used for synthesizing thirteen gel samples and optimal sample was... 

Biological layers are one of the main problems related to water transfer with pipe lines which are formed through time in the inner surface of the pipes by the water nutrients. Hence, the inner surfaces in the pipe lines and water refineries should be made in order not to let these biological layers to be made. The reason is that when the biofilm is formed on these surfaces, the traversing water is polluted. Dredging of these pipes is not only necessary in most of the countries in the world and needs huge amounts of water but is also very complex and expensive.In this research, nanomaterials, namely ZnO, T〖iO〗_2،S〖iO〗_2 have been used to cover the surface of concrete and steel pipes (The... 

Sand production from oil reservoirs leads to various problems, such as well productivity reduction, operating equipment corrosion, and increased production costs. Therefore, controlling sand production in unconsolidated reservoirs is crucial for operating companies. Chemical injection into the formation in order to strengthen and reduce sand production is one of the most important methods of sand control. In this study, a hydrogel nanocomposite was designed and its effectiveness in sand control was investigated. Various tests were carried out to define and assess its efficacy, as follows: Morphological tests demonstrated the creation of a dense, homogeneous, and porous structure. Structural... 

As fossil fuels are still the world's most important source of energy, as well as the maturity of most of the world's oil reservoirs, there is a need for enhanced oil recovery methods to meet the world's increasing oil demands. MEOR methods are new and promising methods that are still in the research and development stage. One of the MEOR methods is the use of biosurfactants, which increase the oil recovery by two mechanisms: 1) reducing the interfacial tension between water and oil and 2) changing the wettability of the rock. In this study, the performance of two glycolipid biosurfactants, rhamnolipid and sophorolipid, in increasing oil recovery has been investigated. Initially, surface... 

Considering the limitations of fossil fuels in recent years, as well as increasing demand for biofuels, it is anticipated that future attention to biofuels will increase further. Among biofuels, due to some disadvantages of bioethanol and biodiesel fuel, there is a tendency to use biobutanol, which does not have the disadvantages of the mentioned fuels. The cost of chemical production of butanol also led researchers to use biotechnology production of butanol. According to studies, butanol production can be achieved by fermenting some sugars such as glucose, xylose, and ... by anaerobic microorganism, but the cost of using these sugars has resulted in the use of natural sources of these... 

The methods of Enhanced Oil Recovery (EOR) from reservoirs have been taken into consideration recently due to the decline in oil reserves and the rise in energy demand. Studies and investigations indicate the tremendous potential of chemical approaches based on injecting ionic liquids into the porous media with the goal of improving oil recovery. Additionally, hydrogels and polymers, which are two of the process' primary materials, are thought to be good alternatives. In the current study, a hydrogel based on carboxymethyl cellulose was first created and synthesized. Ionic liquids based on imidazolium and triflate anion were then added, and their effectiveness in enhancing the properties... 

The following dissertation discusses Ionic Liquids (ILs) as an alternative to commercial surfactants for use in the Enhanced Oil Recovery process. Ionic Liquids came to researchers’ attention due to their environmental nature and their tolerance for high temperatures and salinity. In this work, firstly, an extensive literature review is carried out, and then, experiments are designed and performed to evaluate ILs’ surface activity and performance in a lab-scale EOR set-up. The Ionic Liquids used in this work consist of three types of methylimidazolium nitrate, [MIM]+[NO3]-, with three different alkyl chain lengths. This combination, and specifically the effect of nitrate anions on EOR and... 

AZ91 is the most applicable alloy of magnesium alloys.Semisolid stir welding of AZ91 magnesium alloy was investigated due to its welding problem such oxide formation, hot cracking in weld metal, and high residual stress through solidification with special focus on the effect of the welding temperatures, stirring rates, and tool shape. The interlayer with thickness of 2mm was located between two AZ91 pieces with 7.5mm thickness. Then, they were heated to the desired temperatures (515C, 530C and 540C), the semisolid temperature of both base metal and interlayer. A grooved stirrer with six rotational speeds from 0rpm to 2000rpm was introduced into the stir weld seam and the welded coupons... 

In this thesis, the value-ladenness or value-neutrality of technology, new social media and as a result Instagram is investigated. It is also discussed whether values can be taken into account during the design process of technical artefacts, including new social media and Instagram, and methods are developed for this purpose. Several methods have been developed for this purpose, some of them and their compatibility with modern social media are explained; including the Value-Sensitive-Design method and the disclosive computer ethics design method. The frameworks of ethical philosophy such as virtue ethics are reviewed and the appropriate ethical framework for the analysis of new social media...