Loading...
Search for:
hosseini--payam
0.113 seconds
Total 1235 records
The Effect of Olive Leaf Green Inhibitor on the Corrosion Resistance of Steel Reinforcement in Geopolymer Concrete Pore Solution
, M.Sc. Thesis Sharif University of Technology ; Afshar, Abdollah (Supervisor) ; Hosseini, Payam (Co-Supervisor)
Abstract
In this research project, the aim was to investigate the potential of olive leaf extract as an eco-friendly inhibitor for enhancing the corrosion resistance of reinforcing steel in simulated geopolymer concrete pore solution (GCP) containing chloride ions. The inhibitory effects of olive leaf extract were evaluated using various electrochemical techniques as well as scanning electron microscopy. The main phenolic compounds present in olive leaf extract were identified using high performance liquid chromatography (HPLC). Moreover, the elements and chemical bonds present in the surface passive film of the steel bar immersed in the olive leaf inhibiting system were characterized using...
Analysis and Study the Effect of Knowledge Management Implementation on Productivity Case Study: Tehran Regional Electric Company
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
The successful development and implementation of a knowledge management system requires principles and instructions compatible with the organization. In the absence of essential and domestic components of a given organization, the process of knowledge management implementation will fail to be successfully completed. There are now various models for the implementation of knowledge management; however, these models only recommend general strategic guidelines, hardly offering any specific strategic plans as to how organizations can successfully and effectively implement knowledge management. Since the promotion of productivity is the ultimate goal of knowledge management, the present research...
Coordinated Scheduling of Power and Natural Gas Systems Considering Demand Uncertainty
, M.Sc. Thesis Sharif University of Technology ; Rafiee, Majid (Supervisor)
Abstract
The everyday increasing electricity consumption of household and industrial sectors across the world, and also the limited generation capacity and fuel supplies has led electricity companies, whether in private or government sectors, to focus deliberately on power generation planning, its costs, risks and constraints Because of many reasons including high efficiency, low cost of capital investment, expeditious permitting, and operation flexibility of gas-fired generating units, electricity companies prefer them to old ones like coal-fired or oil-fired generating units. Thus natural gas has gained a significant share in the portfolio of electricity generation fuel resources, and it is...
Robust DTC control of doubly-Fed induction machines based on input-output feedback linearization using recurrent neural networks
, Article Journal of Power Electronics ; Volume 11, Issue 5 , 2011 , Pages 719-725 ; 15982092 (ISSN) ; Hashemnia, M. N ; Faiz, J ; Sharif University of Technology
2011
Abstract
This paper describes a novel Direct Torque Control (DTC) method for adjustable speed Doubly-Fed Induction Machine (DFIM) drives which is supplied by a two-level Space Vector Modulation (SVM) voltage source inverter (DTC-SVM) in the rotor circuit. The inverter reference voltage vector is obtained by using input-output feedback linearization control and a DFIM model in the stator a-b axes reference frame with stator currents and rotor fluxes as state variables. Moreover, to make this nonlinear controller stable and robust to most varying electrical parameter uncertainties, a two layer recurrent Artificial Neural Network (ANN) is used to estimate a certain function which shows the machine...
Alginate/PVP/Pomegranate Seed Hydrogels as Bio-sorbents of Water Pollutants
, M.Sc. Thesis Sharif University of Technology ; Frounchi, Masoud (Supervisor) ; Mollaabasi, Payam (Co-Supervisor)
Abstract
In the past decades, hydrogels have been used as an adsorbent with high potential to remove pollutants in water. Hydrogels are three-dimensional polymer networks that have the ability to absorb and store water and water-soluble compounds due to the presence of hydrophilic functional groups in their structure. Different particles with unique characteristics can be used to increase the efficiency of hydrogel absorption. Based on the type of pollutant, hydrogels are divided into three different forms, including particles, films and nanocomposites. In this research, the absorption effect of metal cations as well as the absorption kinetics of polyvinyl pyrrolidine-based hydrogels, sodium...
Iran’s oil development scenarios by 2025 [electronic resource]
, Article Energy Policy ; Volume 56, May 2013, Pages 612-622 ; Sharif University of TechnologyDynamic Simulation and Control of Reactive Systems Involving Metabolic Pathways
, M.Sc. Thesis Sharif University of Technology ; Bozorgmehry Bozarjomehry, Ramin (Supervisor) ; Setoodeh, Payam (Co-Supervisor)
Abstract
In this project, modeling, simulation, and control of the Saccharomyces Cerevisiae were studied. In the first section, simulation and control of a structural model of saccharomyces Cerevisiae were performed. Fuzzy Logic Controller (FLC) as a model-independent controller and Global Linearization Controller (GLC) as a model-based controller were designed. Additionally, two types of Kalman filters were designed to predict all states of the structural model: 1-Extended Kalman Filter (EKF), 2- Unscented Kalman Filter (UKF). As a concise explanation, the control action of the GLC is a function of all states of the model, and since that measuring all metabolites is not practical, the EKF and UKF...
Monte Carlo simulation of Feynman-α and Rossi-α techniques for calculation of kinetic parameters of Tehran research reactor
, Article Annals of Nuclear Energy ; Volume 38, Issue 10 , 2011 , Pages 2140-2145 ; 03064549 (ISSN) ; Vosoughi, N ; Hosseini, M ; Sharif University of Technology
2011
Abstract
Noise analysis techniques including Feynman-α (variance-to-mean) and Rossi-α (correlation) have been simulated by MCNP computer code to calculate the prompt neutron decay constant (α0), effective delayed neutron fraction (βeff) and neutron generation time (Λ) in a subcritical condition for the first operating core configuration of Tehran Research Reactor (TRR). The reactor core is considered to be in zero power (reactor power is less than 1 W) in the entire simulation process. The effect of some key parameters such as detector efficiency, detector position and its dead time on the results of simulation has been discussed as well. The results of proposed method in the current study are...
Semisolid Stir Joining of AZ91 Magnesium alloy
, M.Sc. Thesis Sharif University of Technology ; Aashuri, Hosseini (Supervisor)
Abstract
AZ91 is the most applicable alloy of magnesium alloys.Semisolid stir welding of AZ91 magnesium alloy was investigated due to its welding problem such oxide formation, hot cracking in weld metal, and high residual stress through solidification with special focus on the effect of the welding temperatures, stirring rates, and tool shape. The interlayer with thickness of 2mm was located between two AZ91 pieces with 7.5mm thickness. Then, they were heated to the desired temperatures (515C, 530C and 540C), the semisolid temperature of both base metal and interlayer. A grooved stirrer with six rotational speeds from 0rpm to 2000rpm was introduced into the stir weld seam and the welded coupons...
Instagram and its Relation to Moral Values
, M.Sc. Thesis Sharif University of Technology ; Hosseini, Hassan (Supervisor)
Abstract
In this thesis, the value-ladenness or value-neutrality of technology, new social media and as a result Instagram is investigated. It is also discussed whether values can be taken into account during the design process of technical artefacts, including new social media and Instagram, and methods are developed for this purpose. Several methods have been developed for this purpose, some of them and their compatibility with modern social media are explained; including the Value-Sensitive-Design method and the disclosive computer ethics design method. The frameworks of ethical philosophy such as virtue ethics are reviewed and the appropriate ethical framework for the analysis of new social media...
Calculation of fuel burn up and radioactive inventory for HEU fuel element of Tehran Research Reactor
, Article International Conference on Nuclear Engineering, Proceedings, ICONE, 17 May 2010 through 21 May 2010 ; Volume 2 , 2010 ; 9780791849309 (ISBN) ; Vosoughi, N ; Hosseini, M ; Nuclear Engineering Division ; Sharif University of Technology
2010
Abstract
This paper presents a new approach for fuel burn up evaluation and radioactive inventory calculation used in Tehran Research Reactor. The approach is essentially based upon the utilization of a program written by C# which integrates the cell and core calculation codes, i.e., WIMSD-4 and CITVAP, respectively. Calculation of fuel burn up and radioactive inventories has been done for 26 core configuration of Tehran Research Reactor with HEU fuel element. The present inventory and fuel enrichment of each fuel element have been calculated
Preparation and characterization of yttrium iron garnet (YIG) nanocrystalline powders by auto-combustion of nitrate-citrate gel
, Article Journal of Alloys and Compounds ; Volume 430, Issue 1-2 , 2007 , Pages 339-343 ; 09258388 (ISSN) ; Madaah Hosseini, H. R ; Nemati, Z. A ; Sharif University of Technology
2007
Abstract
The nitrate-citrate gel exhibits auto-catalytic behavior, which can be used to synthesize nanocrystalline YIG powders. In this study, yttrium iron garnet (Y3Fe5O12) nanocrystalline powders were prepared by a sol-gel auto-combustion process. The influence of metal nitrates to citric acid molar ratio (MN/CA) of the precursor solution on the combustion behavior and crystallite size of synthesized powders was investigated by scanning electron microscopy (SEM), thermal analyses (DTA/TGA) and X-ray diffraction (XRD). The results show that with increasing MN/CA value, the combustion rate increases and the single-phase YIG forms at a higher temperature. The crystallite size of the single phase YIG...
Experimental and numerical fatigue life study of cracked AL plates reinforced by glass/epoxy composite patches in different stress ratios
, Article Mechanics Based Design of Structures and Machines ; Volume 49, Issue 6 , 2021 , Pages 894-910 ; 15397734 (ISSN) ; Safarabadi, M ; Ganjiani, M ; Mohammadi, E ; Hosseini, A ; Sharif University of Technology
Bellwether Publishing, Ltd
2021
Abstract
In this study, the fatigue behavior of composite reinforced cracked aluminum 1050 plates is investigated experimentally and numerically. The tests are conducted in four different stress ratios between 0 and 1. At first step, plates with similar cracks and geometries have been prepared. Then the glass/epoxy patches have been attached to the cracked plates using Araldite 2015 adhesive. Fatigue load has been applied to three cases of samples including non-patch, one-side patch and two-side patch, where in all stress ratios the maximum force is considered constant. A three-dimensional finite element analysis is developed in ABAQUS. A good correlation between finite element results and the...
Preparation and characterization of nanocrystalline misch-metal-substituted yttrium iron garnet powder by the sol-gel combustion process
, Article International Journal of Applied Ceramic Technology ; Volume 5, Issue 5 , 26 August , 2008 , Pages 464-468 ; 1546542X (ISSN) ; Madaah Hosseini, H. R ; Nemati, Z. A ; Sharif University of Technology
2008
Abstract
Nanocrystalline Y3-xMMxFe5O12 powders (MM denotes Misch-metal, x = 0.0, 0.25, 0.5, 0.75, and 1.0) were synthesized by a sol-gel combustion method. Magnetic properties and crystalline structures were investigated using X-ray diffraction (XRD), a vibrating sample magnetometer (VSM), and a scanning electron microscope. The XRD patterns showed that the single-phase garnet of Y3-xMMxFe5O12 was formed at x values ≤ 1.0. The saturation magnetization of powders increased with decreasing MM content and reached the maximum value at Y3 Fe5O12. The crystallite size of powders calcined at 800°C for 3 h was in the range of 38-53 nm. © 2008 American Ceramic Society
Synthesis of nanocrystalline yttrium iron garnets by sol-gel combustion process: The influence of pH of precursor solution
, Article Materials Science and Engineering B: Solid-State Materials for Advanced Technology ; Volume 129, Issue 1-3 , 2006 , Pages 211-215 ; 09215107 (ISSN) ; Madaah Hosseini, H. R ; Nemati, Z. A ; Sharif University of Technology
2006
Abstract
The nitrate-citrate gels exhibit auto-catalytic behavior, which can be used to synthesize the nanocrystalline YIG powders. In this study yttrium iron garnet (Y3Fe5O12) nanocrystalline powders were prepared by a sol-gel auto-combustion process. The influence of pH value of the precursor solution on the combustion behavior and the garnet phase formation of synthesized powders were investigated by scanning electron microscopy (SEM), thermal analysis (DTA/TGA), infrared (IR) spectroscopy and X-ray diffraction technique (XRD). The results show that with increasing pH value, the combustion rate increases. The as-burnt powder prepared with pH 1 yielded a single phase YIG after calcination at 800...
L-lysine biodetector based on a TOCNFs-coated Quartz Crystal Microbalance (QCM)
, Article European Polymer Journal ; Volume 186 , 2023 ; 00143057 (ISSN) ; Iraji zad, A ; Vossoughi, M ; Hosseini, M ; Sharif University of Technology
Elsevier Ltd
2023
Abstract
Developing a simple, cost effective and accurate detection method for L-lysine (Lys), L-leucine (Leu) and glycine (Gly) as the important analytes in clinical diagnostics, biological processes and food industries is of great significance. Herein, we prepared spin-coated TEMPO-oxidized cellulose nanofibrils (TOCNFs) on Quartz Crystal Microbalance (QCM) chip to achieve QCM biodetectors. The coated QCMs were carefully characterized before and after interaction with amino acids (AA) using water contact angle (WCA), Fourier transform infrared spectrophotometry-attenuated total reflectance (FTIR-ATR), Raman spectroscopy, and scanning electron microscopy (SEM). In addition, to study the response of...
Lattice Boltzmann simulation of TiO2-water nanofluid in a curved boundary domain at high Rayleigh numbers
, Article Computers and Fluids ; Volume 168 , 30 May , 2018 , Pages 159-169 ; 00457930 (ISSN) ; Saidi, M. H
Elsevier Ltd
2018
Abstract
In this paper, a two-component Lattice Boltzmann Method (LBM) has been utilized to simulate the natural convection of TiO2-water nanofluid in a curved geometry. The main purpose of this research is to study the effect of nanoparticle size and also boundary conditions on the thermal characteristics of the nanofluid. Furthermore, the effect of Rayleigh number (Ra) and volume fraction of nanoparticles (ϕ) on the average Nusselt number (Nuave) have been investigated. Two different thermal boundary conditions, namely adiabatic and constant temperature, have been considered in the current work for the curved boundaries. The Rayleigh number varies from 103 to 109. Four different sizes, namely 10,...
High accurate three-dimensional neutron noise simulator based on GFEM with unstructured hexahedral elements
, Article Nuclear Engineering and Technology ; Volume 51, Issue 6 , 2019 , Pages 1479-1486 ; 17385733 (ISSN) ; Sharif University of Technology
Korean Nuclear Society
2019
Abstract
The purpose of the present study is to develop the 3D static and noise simulator based on Galerkin Finite Element Method (GFEM) using the unstructured hexahedral elements. The 3D, 2G neutron diffusion and noise equations are discretized using the unstructured hexahedral by considering the linear approximation of the shape function in each element. The validation of the static calculation is performed via comparison between calculated results and reported data for the VVER-1000 benchmark problem. A sensitivity analysis of the calculation to the element type (unstructured hexahedral or tetrahedron elements) is done. Finally, the neutron noise calculation is performed for the neutron noise...
Neutron spectrum unfolding using artificial neural network and modified least square method
, Article Radiation Physics and Chemistry ; Volume 126 , 2016 , Pages 75-84 ; 0969806X (ISSN) ; Sharif University of Technology
Elsevier Ltd
2016
Abstract
In the present paper, neutron spectrum is reconstructed using the Artificial Neural Network (ANN) and Modified Least Square (MLSQR) methods. The detector's response (pulse height distribution) as a required data for unfolding of energy spectrum is calculated using the developed MCNPX-ESUT computational code (MCNPX-Energy engineering of Sharif University of Technology). Unlike the usual methods that apply inversion procedures to unfold the energy spectrum from the Fredholm integral equation, the MLSQR method uses the direct procedure. Since liquid organic scintillators like NE-213 are well suited and routinely used for spectrometry of neutron sources, the neutron pulse height distribution is...
3D neutron diffusion computational code based on GFEM with unstructured tetrahedron elements: A comparative study for linear and quadratic approximations
, Article Progress in Nuclear Energy ; Volume 92 , 2016 , Pages 119-132 ; 01491970 (ISSN) ; Sharif University of Technology
Elsevier Ltd
2016
Abstract
In the present study, the comparison between the results obtained from the linear and quadratic approximations of the Galerkin Finite Element Method (GFEM) for neutronic reactor core calculation was reported. The sensitivity analysis of the calculated neutron multiplication factor, neutron flux and power distributions in the reactor core vs. the number of the unstructured tetrahedron elements and order of the considered shape function was performed. The cost of the performed calculation using linear and quadratic approximation was compared through the calculation of the FOM. The neutronic core calculation was performed for both rectangular and hexagonal geometries. Both the criticality and...