Loading...
Search for:
irani-rahaghi--abolfazl
1.718 seconds
Total 174 records
Two-dimensional numerical investigation of a micro combustor
, Article Scientia Iranica ; Volume 17, Issue 6 B , December , 2010 , Pages 433-442 ; 10263098 (ISSN) ; Saidi, M. S ; Saidi, M. H ; Shafii, M. B ; Sharif University of Technology
2010
Abstract
In this paper, a two-dimensional numerical approach is used to study the effect of micro combustor height, mass flow rate and external convection heat transfer coefficient on the temperature and species mass fraction profiles. A premixed mixture of H2-Air with a multi-step chemistry is used. The transient gas phase energy and species conservation equations result in an Advection-Diffusion-Reaction system that leads to two stiff systems of PDEs. In the present work, the computational domain is solved through the Strang splitting method, which is suitable for a nonlinear stiff system of PDEs. A revised boundary condition for the velocity equation is applied and its effect on the flow...
One Dimensional and Two Dimensional Numerical Investigation of Micro Scale Combustion
, M.Sc. Thesis Sharif University of Technology ; Saidi, Mohammad Said (Supervisor) ; Saidi, Mohammad Hasan (Supervisor) ; Shafii, Mohammad Behshad (Supervisor)
Abstract
In this paper, a one-dimensional and two-dimensional numerical approach is used to study the effect of various parameters such as micro combustor height, mass flow rate and external convection heat transfer coefficient on the temperature and species mass fraction profiles. A premixed mixture of H2-Air with a multi-step chemistry (9 species and 19 reactions) is used. The transient gas phase energy and species conservation equations result in an Advection-Diffusion-Reaction system (A-D-R) that leads to two stiff systems of PDEs, which can not be solved by conventional Computational Fluid Dynamics (CFD) methods. In the present work, Strang splitting method, which is suitable for nonlinear stiff...
Design and implementation of a dynamic-reconfigurable architecture for protocol stack
, Article 2nd IPM International Symposium on Fundamentals of Software Engineering, FSEN 2007, Tehran, 17 April 2007 through 19 April 2007 ; Volume 4767 LNCS , 2007 , Pages 396-403 ; 03029743 (ISSN); 9783540756972 (ISBN) ; Sabetghadam, S ; Rahaghi, R. Y ; Jalili, R ; Sharif University of Technology
Springer Verlag
2007
Abstract
Future communication and computation devices require mechanisms for on-the-fly reconfiguration in their protocol stack to operate in different situations and networks. This paper proposes a component-based framework for dynamic-reconfigurable protocol stack. Considering that every running protocol component communicates with at least one peer component, unlike related work our framework supports synchronous reconfiguration of two peer protocol components in two communicating protocol stacks. © Springer-Verlag Berlin Heidelberg 2007
Retrofitting a steam power cycle by using water from the interstage feed water pump as reheat spray
, Article ASME Power Conference 2008, Lake Buena Vista, FL, 22 July 2008 through 24 July 2008 ; July , 2008 , Pages 23-30 ; 9780791848326 (ISBN) ; Irani Rahaghi, A ; Mousavi, M. S ; Power Division, ASME ; Sharif University of Technology
2008
Abstract
Various methods are used in thermal power plants to adjust the superheated or reheated steam temperature to a pre-determined set point, including flue gas recirculation, using tilting burners and spray of water from discharge of feed water pump, etc. In this paper, an innovative method is presented to control the reheater temperature by tapping water from an interstage of the feed water pump to control reheater temperature at the Bisotoun Power Plant (a steam cycle based power plant in the western Iran). The spray water for the superheaters is secured from the discharge of feed water pump, but interstage water, instead of gas recirculation or using tilting burner, is used to control the...
Efficient high harmonic generation of bromine molecule by controlling the carrier-envelope phase and polarization of driving laser pulse
, Article Chemical Physics Letters ; Volume 719 , 2019 , Pages 27-33 ; 00092614 (ISSN) ; Monfared, M ; Sharif University of Technology
Elsevier B.V
2019
Abstract
The generation of ultrashort attosecond pulse requires both an enhanced high harmonic generation and the spectral-phase control. In the present work, an efficient method is theoretically investigated for extending HHG cutoff energy in Br2 molecule using TDDFT. The effects of molecular orientation and carrier-envelope phase of the laser on the high harmonic spectrum are analyzed. As a result, by the fine modulations of the laser field, the harmonic plateau is enlarged and the position of structure-induced interference minimum shifts. We also provide a physical picture on the intensity dependence of the spectral minima in the harmonic spectra
Numerical Simulation of 2D Compressible Cavitation Flow Using Compact Finite-Difference Method
, M.Sc. Thesis Sharif University of Technology ; Hejranfar, Kazem (Supervisor)
Abstract
In the present study, the numerical simulation of 2D inviscid compressible cavitation flow is performed by using the compact finite-difference method. The problem formulation is based on the multiphase compressible Euler equations with the assumption of the homogeneous equilibrium model and the system of baseline differential equations is comprised of the continuity, momentum and energy equations for the vapor-liquid mixture. To complete the system of governing equations, the ideal gas relation is used for the vapor phase and the Tait relation is applied for the liquid phase, and therefore, the compressibility effects are considered for both the vapor and liquid phases. To analyze the flow...
2D and 3D simulation of bubble columns using CFD methods
, Article CHISA 2006 - 17th International Congress of Chemical and Process Engineering, Prague, 27 August 2006 through 31 August 2006 ; 2006 ; 8086059456 (ISBN); 9788086059457 (ISBN) ; Bozorgmehri, R ; Sharif University of Technology
2006
Abstract
This article presents the results of 2D and 3D simulations of a bubble column reactor at steady state conditions and low gas flow rates. The simulations have been done based on a two-fluid model with a k - ε model used for turbulence modeling. The experimental data have been obtained by differential pressure transducer. For analyzing of hydrodynamic parameters such as hold up and velocity profiles of phases, a system consists of water tank and air aerated from bottom is set up. The simulations have been done based on two different approaches which are mixture and eulerian approaches. Despite the fact that these approaches lead to similar results, the convergence and stability of eulerian...
An analytical and experimental study of precision forging of aluminum spur gear
, Article Steel Research International, 16 September 2012 through 19 September 2012, Krakow ; Volume SPL. ISSUE , September , 2012 , Pages 163-166 ; 16113683 (ISSN) ; 9783514007970 (ISBN) ; Taheri, A. K ; Sharif University of Technology
Wiley-VCH Verlag
2012
Abstract
An important aspect of production of gears by precision forging process is the prediction of load required to perform the process and to design the forging die. In this research a new kinematically admissible velocity field is presented to predict the forging load by an upper bound analysis. The analysis considers the shape of tooth profile, number of teeth, and frictional conditions between the die/punch and deforming material. To verify the predicted results the 7075 aluminum alloy billets were forged at temperature of 150 to 250 °C in a precision forging die designed to produce a spur gear of 5 teeth. A good agreement was found between the two sets of results at the filling stage of the...
Impact of thermodynamic non-idealities and mass transfer on multi-phase hydrodynamics
, Article Scientia Iranica ; Volume 17, Issue 1 C , JANUARY-JUNE , 2010 , Pages 55-64 ; 10263098 (ISSN) ; Pishvaie, M. R ; Sharif University of Technology
2010
Abstract
Considering the non-ideal behavior of fluids and their effects on hydrodynamic and mass transfer in multiphase. flow is very essential. Simulations were performed that take into account the effects of mass transfer and mixture non-ideality on the hydrodynamics reported by Bozorgmehry et al In this paper, by assuming the density of phases to be. constant and using Raoult's law instead of EOS and the fugacity coefficient definition, respectively, for both liquid and gas phases, the importance of nonideality effects on mass transfer and hydrodynamic behavior was studied. The results for a system of octane/propane (T = 323 K and P = 445 kPa) also indicated that the assumption of constant density...
Hybrid adsorption–photocatalysis properties of quaternary magneto-plasmonic ZnO/MWCNTs nanocomposite for applying synergistic photocatalytic removal and membrane filtration in industrial wastewater treatment
, Article Journal of Photochemistry and Photobiology A: Chemistry ; Volume 391 , 2020 ; Amoli Diva, M ; Sharif University of Technology
Elsevier B.V
2020
Abstract
A new multifunctional filtration membrane was prepared by twofold advantages of conventional polymeric-membrane as the supporting layer and magneto-plasmonic Ag-doped ZnO@Fe3O4/MWCNTs nanocomposite as the functional layer. Poly acrylic acid (PAA)-modified polyamide (PA) discs (PAA-PA) were applied to increase the hydrophilicity of prepared membrane and X-Ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used for characterization. The grafting yield of PAA in the pores and on the surface of PA was 17 wt.% and weigh difference between PAA-PA membrane before and after modifying with the photocatalyst was 8.7 mg. The amount of photocatalyst loading in the prepared...
Effect of forging temperature on homogeneity of microstructure and hardness of precision forged steel spur gear
, Article Materials Chemistry and Physics ; Volume 112, Issue 3 , 2008 , Pages 1099-1105 ; 02540584 (ISSN) ; Karimi Taheri, A ; Sharif University of Technology
2008
Abstract
Precision forging is a suitable process to produce spur gears due to its advantages such as reduction in machining time and production cost. The homogeneity in microstructure and mechanical properties of precision forging products can highly affect the performance of the gears during their service. In this research the effect of precision forging temperature on homogeneity of microstructure and hardness of forged gears of low carbon steel is studied. The microstructure and hardness map of the gears forged at a temperature range of 750-1150 °C revealed that the forging temperature of 950 °C is an optimum temperature to produce a spur five teeth gear with minimum inhomogeneity in the...
Application of Gis & Fuzzy Technique for Order-Preference by Similarity to Ideal Solution (Topsis) in Siting Water Reservoires
, M.Sc. Thesis Sharif University of Technology ; Shamsai, Abolfazl (Supervisor)
Abstract
Sustainable agricultural development in the country without regard to water supply problems in terms of time and place is not possible. Construction of water storage tanks filled with water and seasonal use in dry seasons in the effective action in the optimal use of water in the climate of (low and irregular rainfall) is. The most important step in the construction of water storage tanks to choose the best point for the construction of the reservoir basin in order to reduce costs and increase efficiency. Chndmyarh different methods to decide the best option for finding a few options from there. Among these methods can be Tapsys two methods (TOPSIS) and hierarchical analysis (AHP) pointed...
Efficient Management of River Water Quality Based on Pollution Trading Approach
, Ph.D. Dissertation Sharif University of Technology ; Shamsai, Abolfazl (Supervisor)
Abstract
“Sustainable development” is a frequently used phrase, but the idiom has been experienced little since it was coined by the Brundtland, due to its intrinsic complications. The issue is going to compromise two key components; economy and ecology. One of the solutions based on concept of sustainable development that has been proposed for maintaining water quality at acceptable levels is to cap pollutant emissions at a sustainable level, then establish an economic market in which the right to discharge pollutants is traded according to market supply and demand mechanisms. Water quality trading or pollution trading is one such kind of market-based program that has also been described using names...
Assessment of Optimum Environmental Flows Using Economic Evaluation Methods
, M.Sc. Thesis Sharif University of Technology ; Shamsai, Abolfazl (Supervisor)
Abstract
One of the main challenges of Water Resources Planning and Management (WRPM) is to balance water allocation between different uses. Usually, due to political and economic power of other uses, ecosystem receives less attention. Environmental flow is the allocated flow to ecosystem. Ecosystem provides a wide range of services to humanity. Therefore, environmental flow is not exclusively a matter of sustaining ecosystem but also a matter of providing humans with better life. Several methods have been developed to determine the environmental flow but only a few consider its socio-economic aspects. Consideration of these aspects could assist decision-makers with determining the optimum flow and...
Numerical Study of Geotextile Application in Downstream Filter Zone of an Embankment Dam with Clay Core
, M.Sc. Thesis Sharif University of Technology ; Shamsaie, Abolfazl (Supervisor)
Abstract
Nowadays, applications of the synthetic materials are developing in civil engineering projects and widely used in these projects. Therefore, during previous years; use of the Geotextiles as one of the Geosynthetic materials in order to filtration, drainage, separation, soil protection, etc have developed ever-increasing. The goal of this research is modeling and studies of the Geotextiles application in the downstream filter zone of embankment dams in combination with granular materials using FLAC2D software. Gordeh Bin embankment dam situated in West Azerbaijan province has been chosen as case study. In this matter, different models have been made with changes in thickness of the inclined...
, M.Sc. Thesis Sharif University of Technology ; Shamsaei, Abolfazl (Supervisor)
Abstract
Entrance of air to close water conduits occurs in many ways. This phenomenon makes displeasing effects on water transport structures. Two-phase flows in closed conduits are studied experimentally, numerically and theoretically. Even after decades, due to the complexity of the subject, these studies still require development and reformation. Numerical and theoretical two-phase models are often limited to a special regime of flow."Volume Of Fluid"(VOF) is a model for non-mixing two-phase flows. "Fluent" software uses this model in this field of flows. Volume of fluid is used successfully in some problems like dam break or rising bubbles. Main disadvantage of this model is distribution of the...
Assessment of waterlogging and provide risk maps by using RS, GIS and field data (case study: Qazvin plain)
,
M.Sc. Thesis
Sharif University of Technology
;
Shamsaei, Abolfazl
(Supervisor)
Abstract
Groundwater quality protection has a significant importance due to abundant applications of these resources in various fields such as agriculture, industry and drinking water. Removal of groundwater pollution is a time and money consuming process and often pollution is detected when improving the quality of groundwater is nearly impossible. For this vulnerability assessment there are three methods: Processing, Overlap-Index and Statistical Methods. Overlap-Index is composed of variety of maps such as Geology, Soil, Groundwater Depth and etc which uses in determining of vulnerability Index. In the present study for underground pollution potential determining, four indexes such as AVI، GOD،...
groundwater level fluctuations forecasting using conjunction models of Wavelet - Neural-Fuzzy Network (WNF) and Wavelet-Neural Network (WNN) and linear model of ARIMA (case study: Qom plain
,
M.Sc. Thesis
Sharif University of Technology
;
Shamsaei, Abolfazl
(Supervisor)
Abstract
Prediction of groundwater level fluctuations is absolutely necessary for the proper manag ement of these precious resources. There are different methods to predict hydrological time series such as groundwater level. Linear models inefficiency in predicting nonlinear and n on-stationary time series cause researchers widely use artificial intelligence techniques such as Artificial Neural Networks (ANN), Fuzzy Inference System (FIS), Genetic Algorithm (GA) and their hybrid models such as Artificial Neural – Fuzzy Inference System (ANFIS). These smart models are capable to simulate nonlinear and non-stationary time series in suitable accu-racy using by a few time and data. By emersion of Wavelet...
GIS Based Procedure to Determine Location of Cascade Small Hydropower Plants Case Study, Nokhan Area
, M.Sc. Thesis Sharif University of Technology ; Shamsai, Abolfazl (Supervisor)
Abstract
Coinciding with the worldwide environmental issues and increasing demand for clean energy sources, hydropower plants have highly attracted decision- makers attention. Low manufacturing costs and pollutions which are made by these plants in comparison with another types of powerhouses, could be reason of that. And so on, hydropower locating and evaluating studies have been highly increased recently, specifically in developing countries. From the point of operation procedure, hydropower plants are generally divided in two types, run-of-he-river and storage projects. This study has concentrated on run-of-he-river projects and due to spotting plant location, Sefidbarg river basin...
Investigation of bed Stability in Downstream for the Diversion dam under Scour (Mill & Moghan case study)
, M.Sc. Thesis Sharif University of Technology ; Shamsai, Abolfazl (Supervisor)
Abstract
Numerical simulations and large eddy simulations (LES) of turbulent flow downstream of diversion dam , pool-riffle bedform in different geometrical ratios (different lengths of riffle and pool) with flow Reynolds number of 3.0 E+04 to 3.3E+04, downstream of special case study "Mill and Moghan diversion dam" with Froude number of 0.5 are presented The calculations are performed using a computational fluid dynamics model, FLOW-3D, which solves the Navier-Stokes equations in three dimensions with finite volume method. Numerical simulations are validated by comparing the numerical results of time-averaged flow patterns downstream of pool-riffle sequence with that of the experimental...