Sharif Digital Repository

Due to the growth of population and the increasing number of auto-manufacturing plants in the world, governments have to find ways to decrease traffic, environmental pollution, etc. Providing parking lots is another problem with which we have to deal. It seems that designing and building multi-storey reinforced concrete parking structures is one of the ways to resolve this problem. According to complex behavior of concrete in compression and tension, it was so important to use an appropriate behavior model. In this research damage concept is used instead of crack concept which could models concrete behavior appropriately which causes acceptable results. According to uni-axial, bi-axial and... 

Due to their unique characteristics, such as drag reduction, anti-fouling, and enhancing condensation, hydrophobic and superhydrophobic surfaces have attracted a lot of attention in the past decades. Since approximately 4% of the fossil fuel usage and 14-19% of the air pollution (including greenhouse gases, sulfur, and so forth) are attributed to naval activities, and the dominant form of drag on vessels is friction, drag reduction will not only reduce the cost and usage of fossil fuels, but it will also have numerous environmental benefits  

Although polyacrylamides and theirs modified polymers have an extremely application in the industry mechanical weakness, such as viscosity in salinity or high temperature cause this polymer loss your functional application. In recent years, many endeavors due as modified this polymer by hydrophobics monomers were done but unfortunately don’t have a significant result. Modified acrylamide monomer and hydrophobic mini-emulsion were survey Most used polymers, such as hydrolyzed polyacrylamide, are not able to high levels of salinity and high temperature of the reservoirs. Dr. Ramazani and theirs group use innovational idea of hydrophilic monomers for overcome to this problem. In this project,... 

In the dairy industry, for the processing of raw milk, including the isolation of living bacteria and microorganisms from milk to increase the shelf life and improve the taste of milk, or the isolation of casein and whey proteins from milk for pHarmaceutical and medical purposes, as well as the production of low-lactose or lactose-free milk for patients with Digestive problems, use membrane processes, especially ultrafiltration and microfiltration, and the main problem in these methods is the fouling of the polymer membranes used, which results in the loss of flux or the reduction of product quality and system efficiency. With the help of bulk modification and surface modification of the... 

Since the classical continuum theory fails to deal with the problems associated with defects, stress concentrators, and relevant deformation phenomena in solids, alternative approaches that can detect the atomistic nature of materials' fracture are required. The deficiency of the capture the size effect which yields delusively high values for some components of the stress field right on the edge of the stress concentrators, and its weakness in describing the complex interaction between small inhomogeneities, cracks and the like when they are only a few nanometers apart, are among some of the disadvantages of the classical approach. In recent years, however, atomistic methods are emerging to... 

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Shot peening is a cold-working process commonly used in industry to improve the fatigue performance, stress corrosion resistance and surface nano-crystallization of metallic parts. This process extends fatigue life via two mechanisms: Preventing the crack growth due to compressive residual stresses and, preventing the crack initiation because of increased material hardness. These mechanisms are the results of the bombardment of the component's surface with small spherical particles. In this research, an analytical model is developed for estimating the residual stress distribution induced by shot peening process. The modifications of the developed analytical model are related to... 

Solid-State Drives (SSDs) provide high performance, low power consumption, and hence are widely used in the I/O cache of enterprise storage systems and high performance servers. Although employing high performance SSDs in the I/O cache of storage systems significantly improves system performance, it comes with significant reliability threats for write operations upon power failures. In order to provide high level of reliability, storage architectures employ SSDs in I/O cache with RAID-1 configuration, however, such configuration only partially mitigates the reliability issues of the SSDs. In this thesis, we analyze the reliability of SSD-based I/O caches against power outage and high... 

An optimal trajectory for flight through Microburst wind shears is designed which minimizes the maximum deviation from desired trajectory With respect to optimal control methods. The suitable performance of airplane retrieval in abort landing and landing phases at microburst encounter is achieved by influence of mentioned design in worse case of wind fluctuation and variation. 3D Vicroy microburst model is selected to investigate its effects on 6 DOF jet engine aircraft EOMs. Above optimal control problem is solved using gradient method of SD . Furthermore, sensitivity of optimal trajectory to lateral and longitudinal location of microburst, microburst parameters, throttle setting and... 

Network design problem (NDP) is an important problem in transportation planning, in which transit network design is one the most important problems. Public transportation means, however, can not meet urban mobility needs in the developing countries satisfactorily. Bus services are usually unsuitable, insufficient, and unreliable. Bus Rapid Transit (BRT) system, is an emerging public transport alternative designed to provide appropriate, low cost, and effective services, and improve mobility in both developed and developing countries. To design public transportation systems, existing constraints such as resources and budget have to be considered to serve estimated demand properly. Bus Rapid... 

Power Quality can be simply defined as the quality of voltage at electrical loads. Detection and classification of voltage and current disturbances is of high importance in power system protection and monitoring. This procedure cannot be implemented by operators because of the high volume of the data which must be processed. So, it is needed to automate this procedure. Systems designed for this purpose usually contain three main parts: feature generation, feature selection and classifier design. The algorithms used for feature generation for power quality disturbances are mainly based on discrete Fourier transformation or discrete wavelet transformation. These approaches have shown some...