Sharif Digital Repository

Numerical study of the interaction mechanism of the premixed flame and the acoustic field is performed in this work. The geometry similar to those used in experiments, is a two-dimensional tube in which flame travels form open end towards the closed end. The numerical study is done using PPM method. Results show that the shape and speed of laminar flame is strongly affected by the induced acoustic field. Stronger interaction is observed in the closed-end tube with no slip boundary conditions. The effect of the Lewis number on the interaction mechanism is also investigated. Premixed flame- accelerated flame – interaction of flame and acoustic field  

Translation quality assessment (TQA) as a systematic field of inquiry has been under scholarly investigation over the past decades. In spite of the challenges appeared in the path to success, theoretical and practical developments have already been made in translation studies. One of the unsettled and challenging problems concerning translation assessment, yet, is the subjectivity that is inherent in the process of scoring test-takers’ translation performances. In the absence of any granular objective criteria which includes all the subcomponents of translation as a multi-layer rather than unitary construct, the raters inevitably bring their intuition and will to the act of measurement.... 

Knowing the location and time of oil accidents and trying to track the pollution caused by these accidents is very important for the purpose of monitoring and protecting the environment. The occurrence of large oil spills in the marine environment can have serious environmental, social and economic consequences. In this research, oil spills in the Persian Gulf were first identified using remote sensing method and Sentinel-1 satellite images. The images of this satellite were called for the processes needed to identify oil spills in Google Earth Engine space. After detecting the oil spills, it is necessary to determine the duplicate spills and remove these types of spills, as well as estimate... 

Nowadays, despite the special position of power electronic converters in the world, and the fact that they become an integral part of human life, still in the wake of a serious necessity the development process has not stopped and the increasingly fast pace, it opens up new horizons. This important necessity emerges from the environmental concerns regarding consumption of fossil fuels and their limited and imbalanced distribution which can be effectively addressed with the use renewable energy systems. By improving the quality of the semiconductor switches and offering new topologies in different functions as well as using new control methods, scholars try to develop enhanced converters in... 

In this thesis, we focus on some internal organization issues of the supply chain; in particular, we analyze some network design problems which are typical of producer companies. The aim is to optimize the flow of goods through the literature distribution network, from the plants where the goods are produced (supply points) to the demand points, which are essentially distributors such as wholesalers or retailers. The system addresses a class of distribution network design problems, which is characterized by multiple product families, a central manufacturing plant site, multiple central warehouses and distribution center, and retail outlets (customer zones) which demand multiple units of... 

The purpose of this research has been measuring how much studied companies use different levers of controls. Management control system has been described as the system which ensures the organization about implementing its strategy (Antony, 2004; Simons, 1995). In this research we chose Levers of Control framework (Simons, 1995) as the proper model to describe management control systems in organizations. Using related literatures, we developed a questionnaire to measure how much different organizations use each levers of control. The proposed questionnaire was distributed in three businesses with different Value Creation Logics (Stabell & Fjeldstad, 1998), to provide a ... 

Popular usage of composite materials in aerospace, civil and defense industries in the last decades has been the cause for paying more attention to optimization of composites tailoring. Due to inherent complexity of composite problems, i.e. discrete nature, complex interrelationship of design variables, existence of so many local optimum points, and etc., gradient base methods of optimization are found to be incapable and as a result using other powerful methods seems inevitable. Nowadays Genetic algorithm (GA) as an evolutionary technique is used for tackling composite problems. The success of a genetic algorithm can be quantified by estimating the cost, time required and the quality of... 

Today, the correct management of construction projects in IRAN's water industry has become a severe concern for its managers. Construction projects of the water industry constitute a considerable part of the country's construction industry. Several significant Issues such as operation management, water industry projects, correct management of resources, crisis management in the water industry, increased productivity and useful life of structures, increasing productivity, and preventing water loss are among the determinative challenges in construction projects in Iran. One of the new methods for the correct management of the life cycle of projects in this area is the use of Building... 

The distinction between SOEs and private firms in access to loans is essential from the viewpoint of policy-making. This distinction is more crucial when we know that the difference is caused by factors other than natural market forces and has emerged merely by government ownership. In this paper, we investigate a unique intervention in privatization and identify the causal effect of government ownership on access to loans. In this respect, we study Sahamedalat in Iran by using DID approach and estimate the effect of giving up the treatment firm's cashflow right on the amount and composition of the loans. The results show the intervention significantly decreases the long-term loan of the... 

Nowadays, concerns about the reduction of fossil fuels and environmental issues, have made renewable resources more important. Among these resources, photovoltaic (PV) systems are more popular than others, due to their environmental compatibility and unlimited availability of sunlight. Increasing the penetration level of PV systems in electricity networks presents various technical and control challenges such as voltage and frequency variations; and protection and harmonics issues. In this thesis, voltage rise problem due to reverse power flow in distribution feeders is discussed. This is one of the main obstacles to the expansion of these resources in distribution networks.Various solutions... 

With the progression of technology demands for novel method of heat cooling is increased so the old method of cooling such as heat removal by air stream with force convection and even single phase method was not sufficient for today’s industry need. Nowaday, spray cooling method which belongs to two phase cooling method is one of the most popular method. In this study two method of spray cooling: spray cooling with flow blurring nozzle and electrospray cooling were investigated. For both method, at first the physics of phenomena and morphology of spray is studied experimentally then the efficiency of heat removal in each method is evaluated by the assessment of variation of temperature and... 

A prismatic high temperature gas-cooled reactor (HTGR), which is a graphite moderated, helium-cooled reactor, is a promising candidate for next generation nuclear power plant in that it enables applications, such as hydrogen production or process heat for petrochemical by supplying heat with core outlet temperatures as high as 1000°C. A Thermal Hydraulic Analysis Code (THAC) for gas-cooled reactors has been developed. THAC implicitly solves heat transfer equation of fuel, graphite block and helium. Three types of fuel pins were considered; solid fuel pin, fuel pins with inside holes and annular fuels with coolant flow from its inside and outside surfaces. THAC predicts axial and radial... 

A triple antibiotic mixture (ciprofloxacin, metronidazole, and minocycline) has been used for dental root canal medicaments in pulp regeneration therapy. However, tooth discolorations, cervical root fractures, and inadequate pulp-dentin formation have been reported due to the triple antibiotic regimen. Therefore, antibiotic containing scaffold has been developed to minimize the clinical limitations and maximize a natural healing process in root canal infections. The ideal controlled release drug device should have the following characteristics. It should not degrade inside the root canal and it should be easily inserted into and removed from the root canal. In addition, the drug should be... 

Self-regulated learning, though having swept educational psychology's literature like a tidal wave (Boekaerts, 1999), and also, compared to other constructs such as metacognition and learning strategies, has remained comparatively uncharted in L2 research. One preliminary step to chart this concept is to develop questionnaires for it. With these and other things in mind, the principal purpose of this study was to develop a questionnaire in English and Persian to measure self-regulated language learning capacity and behavior of Iranian EFL learners. The development of the questionnaire was guided by two pilots (412 participants), content validation through expert judgment, cognitive... 

Volatile Organic Compounds (VOCs) have become an important source of air pollution due to their extended use as solvents in many industrial processes. Aliphatic and aromatic VOC removal from contaminated air can be achieved by a variety of methods including catalytic oxidation, adsorption, and biological treatment. Catalytic oxidation is often the preferred process due to its low cost and high efficiency. Supported transition metal catalysts are effective and inexpensive catalysts for VOC removal from contaminated air. The objective of this project was to prepare low cost transition metal catalysts (Fe, Ni, Co, and Cu) supported on alumina for catalytic oxidation of cyclohexane (as a... 

This thesis works on certain type of underactuated mechanical systems with nonholonomic constrain, namely wheeled robots.Since this robots has different types, this work focuses specifically on three-wheeled robot. At first we know kinematic characteristics of robot system and equations of motion.To control this system, at first we will change equations to chain form, then control it by using known methods. It will be shown that between the known methods for convergence to a fixed point,irregular transformation is the best way for control systems in chain form.Also, with dynamic feedback linearization we can control robot on a trajectory that has a continuous third order derivatives. Then... 

Exhaust gases from poultry rendering facilities contain volatile organic compounds (VOCs) that are a nuisance, odorous, and smog and particulate matter precursors. Other available treatment options, such as thermal and catalytic incineration require temperature intensive inputs and form additional greenhouse gases. Hence, an inexpensive alternative technology is needed to eliminate these air pollutants. This research investigated the catalytic oxidation of toluene vapors using novel dispersed nano catalysts derived from new preparation method. The combined impregnation (IMP) and deposition-precipitation (DP) was used to prepare supported transition metal oxide catalyst over commercial and... 

According to studies on solar stills, there has been designed an industrial solar still with a linear parabolic through collector (PTC) having higher efficiency than similar systems. Linear PTC coupled with heat pipe is very effective for increasing the efficiency of solar still. This system includes a parabolic trough collector functions by focusing the sunlight on a heat pipe and absorption of heat by a heat pipe. To minimize heat loss, heat pipe is embedded in an evacuated tube collector. By absorbing the heat, the working fluid of the heat pipe (ethanol) will be evaporated and due to its reduced density, it moves upwards and attains to the condenser. The external part of the condenser is... 

Due to the diameter and size of nanoparticles, they have been applied in various fields to make materials with better properties. In this thesis, the purpose has been to investigate the influence of nano alumina and nano alumina incorporating nano silica particles on mechanical properties of cement mortars. Different portions of nano alumina that include 1, 3, and 5% have been used. Nano silica with 1 and 2% has been used. At first, nano particles were dispersed by sonication with water, and then the cement mortars with various percent of nano additives with the same workability have been made. After different curing periods (7, 28 days), the specimens have been tested for bending and... 

Today, we live in an information age where all people can access the vast amount of data in the world by connecting to the Internet.Since the Internet has expanded significantly to share information, some individuals and organizations seek to be able to prevent the possible sabotage of some people by monitoring network users. Analysis of computer network traffic is one of the importance issues that many activities have been done in this area. One of the most important questions in traffic analysis is to identify the main content of traffic on the encrypted network. Numerous studies have shown that the traffic of websites visited through the Tor network, including Specific information that...