Sharif Digital Repository

Assessing the durability of concrete is of prime importance to provide an adequate service life and reduce the repairing cost of structures. Freeze-thaw is one such test that indicates the ability of concrete to last a long time without a significant loss in its performance. In this study, the freeze-thaw resistance of polymer concrete containing different polymer contents was explored and compared to various conventional cement concretes. Concretes’ fresh and hardened properties were assessed for their workability, air content, and compressive strength. The mass loss, length change, dynamic modulus of elasticity, and residual compressive strength were determined for all types of concretes... 

A new impeller configuration with innovatively-designed shrouds is introduced, and its impact on the pressure head and efficiency of the semi-open centrifugal pump is explored using experimental and numerical approaches. The proposed design includes attaching specific plates called bladelets to a semi-open impeller to limit the secondary flows over the blades resulting in an increase in the pump head and efficiency. Hydraulic performance of a centrifugal pump with three different bladelets at angles of 30°, 60°, and 90° is investigated experimentally, and the results are compared to semi-open and closed impellers. The values of pressure head and efficiency of the proposed centrifugal pump... 

In this work, application of CO2 saturated with silica nanoparticles in continuous/water alternating gas (WAG) injection for heavy oil recovery was investigated which has been rarely attended in the available literature. Core displacement tests were conducted to monitor heavy oil recovery in both continuous and WAG injection schemes. It has been observed that for continuous nano-saturated CO2 injection, the oil recovery is higher than pure CO2 injection. This observation might be explained by alteration of rock wettability to a more water-wet condition. In WAG injection scheme, water breakthrough happened later in nano-saturated CO2 than pure CO2 injection. This delayed water breakthrough... 

We have investigated the effect of bias voltage on sheet resistance, surface roughness and surface coverage of Co/NiO x magnetic bilayer. In addition, interface topography and corrosion resistance of the Ta/Co/Cu/Co/NiO x /Si(1 0 0) system have been studied for Co layers deposited at an optimum bias voltage. Atomic force microscopy (AFM) and four point probe sheet resistance (Rs) measurement have been used to determine surface and electrical properties of the sputtered Co layer at different bias voltages ranging from 0 to -80 V. The Co/NiO x bilayer exhibits a minimum surface roughness and low sheet resistance value with a maximum surface coverage at Vb=-60 V resulted in a slight increase of... 

We propose a nondissipative transport effect and vortical response in Weyl semimetals in the presence of spatial inhomogeneities, namely, a spatially varying tilt of the Weyl cones. We show that when the spectrum is anisotropic and tilted due to spatial lattice variations, one is confronted with generalized quantum anomalies due to the effective fields stemming from the tilt structure. In particular, we demonstrate that the position-dependent tilt parameter induces local vorticity, thus generating a chiral vortical effect even in the absence of rotation or magnetic fields. As a consequence, it couples to the electric field and thus contributes to the anomalous Hall effect. © 2023 American... 

The low thermal conductivity of phase change materials has resulted in prolonged melting and freezing processes (charge and discharge) in these materials. This problem has limited the application of these materials in the field of thermal energy storage. In the present study, the effects of adding Fe3O4 magnetic nanoparticles at various concentrations as well as applying the magnetic field on the melting process of paraffin as phase change material have been experimentally studied. Thereupon, a cubic chamber in which the left wall applied a constant heat flux was used. At the optimum concentration of nanoparticles (1 mass%), the constant magnetic field with the intensities of 0.01 T and... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

In this study the effects of initial concentration of Fe(II) and Fe(III) ions as well as initial pH on the bioleaching of a low-grade sphalerite ore in a leaching column over a period of 120 days with and without bacteria were investigated. Four different modifications of medium were used as column feed solutions to investigate the effects of initial concentration of Fe(II) and Fe(III) ions on zinc extraction. The experiments were carried out using a bench-scale, column leaching reactor, which was inoculated with mesophilic iron oxidizing bacteria, Acidithiobacillus ferrooxidans, initially isolated from the Sarcheshmeh chalcopyrite concentrate (Kerman, Iran). The effluent solutions were... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

In a nanoscopic thin film of a strong topological insulator (TI) the Coulomb interaction in the channel that exchanges the two electrons with the same chirality in two different planes of the slab takes advantage of the minus sign resulting from such "exchange" and gives rise to a bound state between the positive-energy states in one surface and the negative-energy states in the opposite surface. Therefore particle and hole pairs in the undoped Dirac cone of the TI thin film form an inter-surface spin-singlet state that lies below the continuum of free particle-hole pairs. This mode is similar to the excitons of semiconductors, albeit formed between the electron and hole pairs from two... 

The particle-hole continuum (PHC) for massive Dirac fermions provides an unprecedented opportunity for the formation of two collective split-off states, one in the singlet and the other in the triplet (spin-1) channel, when the short-range interactions are added to the undoped system. Both states are close in energy and are separated from the continuum of free particle-hole excitations by an energy scale of the order of the gap parameter Δ. They both disperse linearly with two different velocities, reminiscent of spin-charge separation in Luttinger liquids. When the strength of Hubbard interactions is stronger than a critical value, the velocity of singlet excitation, which we interpret as a... 

We present a formulation for the nonlinear optical response in gapped graphene, where the low-energy single-particle spectrum is modeled by massive Dirac theory. As a representative example of the formulation presented here, we obtain a closed form formula for the third harmonic generation in gapped graphene. It turns out that the covariant form of the low-energy theory gives rise to peculiar logarithmic singularities in the nonlinear optical spectra. The universal functional dependence of the response function on dimensionless quantities indicates that the optical nonlinearity can be largely enhanced by tuning the gap to smaller values  

Within the block spin renormalization group, we give a very simple derivation of the exact phase boundaries of the XYZ spin chain. First, we identify the Ising order along ◯ or ŷ as attractive renormalization group fixed points of the Kitaev chain. Then, in a global phase space composed of the anisotropy λ of the XY interaction and the coupling Δ of the Δσzσz interaction, we find that the above fixed points remain attractive in the two-dimesional parameter space. We therefore classify the gapped phases of the XYZ spin chain as: (1) either attracted to the Ising limit of the Kitaev-chain, which in turn is characterized by winding number ±1, depending on whether the Ising order parameter is... 

We show that the continuum limit of the tilted Dirac cone in materials such as 8-Pmmn borophene and layered organic conductor α-(BEDT-TTF)2I3 corresponds to deformation of the Minkowski space-time of Dirac materials. From its Killing vectors we construct an emergent tilted-Lorentz (t-Lorentz) symmetry group for such systems. As an example of the t-Lorentz transformations we obtain the exact solution of the Landau bands for a crossed configuration of electric and magnetic fields. For any given tilt parameter 0≤ζ<1, if the ratio χ=vFBz/Ey of the crossed magnetic and electric fields satisfies χ≥1+ζ, one can always find appropriate t-boosts in both valleys labeled by τ=±1 in such a way that the... 

Dirac cone can be tilted in condensed matter setting. As a result of tilt, the Lorentz symmetry is reduced to what we call tilted-Lorentz symmetry. In this paper, we derive the tilted-Lorentz transformations that leave a world with tilted Dirac cone invariant. © 2020, Isfahan University of Technology. All rights reserved  

We introduce dynamic plastic continuous neural network (DPCNN), which is comprised of neurons distributed in a nonlinear plastic medium where wire-like connections of neural networks are replaced with the continuous medium. We use finite element method to model the dynamic phenomenon of information processing within the DPCNNs. During the training, instead of weights, the properties of the continuous material at its different locations and some properties of neurons are modified. Input and output can be vectors and/or continuous functions over lines and/or areas. Delay and feedback from neurons to themselves and from outputs occur in the DPCNNs. We model a simple form of the DPCNN where the... 

The theory of silicon optical modulators of ring resonators based on PN diode in reverse bias is primarily discussed. It secondarily provides a full-featured simulator to investigate the behavior of such modulators. Wave equation for ring structure will be solved by using the conformal transformation method and the matrix method as it was used to analyze bent planar optical waveguides. Power coupling between ring and straight waveguides will be calculated by coupled theory of nonparallel waveguides based on experimental results. The time response demonstrates the capability of this device to operate correctly at up to 10 Gbs-1 bitrate, and the frequency spectrum analysis of device shows a >...