Sharif Digital Repository

One of the efficient solar energy harvesting technics is the parabolic trough concentrated solar power plant. However, if the concentrated solar power plant were not equipped with a storage system, the power plant capacity factor would be deficient. Latent thermal energy storage system using phase change material (PCM) is a high energy density storage system to provide durable energy with a constant temperature. In this study, first, a dynamic analysis is performed implementing TRNSYS software on the parabolic trough concentrated solar power plant located in Shiraz, Iran. Consequently, this system is assisted by the latent thermal energy storage system to improve its performance and capacity... 

The use of solar energy concentration systems for achieving performance enhancements in the Photovoltaic/thermal hybrid solar systems and reduction of initial costs is an idea that has been studied for years. In this article a new structure for parabolic trough photovoltaic/thermal collector is proposed and its thermal and electrical performances are experimentally investigated. The receiver of this concentrator contains a triangular channel with an outer surface covered with photovoltaic cells and thermoelectric modules with a specific arrangement so that in addition to absorbing heat, a larger portion of the solar radiation is directly converted to electricity. Hence, the performance of... 

In this study, a year-round dynamic simulation of a Combined Cooling, Heating and Power generation (CCHP) system has been performed. The proposed system is composed of an ejector cooling system, an Organic Rankine Cycle (ORC), a solar collector field, heat exchangers and hot and cold storage tanks. It is considered that, a portion of the system input energy is provided by a solar collector field and an auxiliary heater supplies the extra required energy. The dynamic simulation of the introduced CCHP system is performed. The developed model is used to evaluate a year-round performance of the system for a residential building located in Tehran. The obtained results indicated that the proposed... 

As a versatile platform for integrating renewable energies, District Heating systems (DHSs) offer a pragmatic approach toward an environmentally benign and sustainable future. This paper puts forward the feasibility evaluation of using geothermal hot spring source Heat pumps (HPs) for district heating of a village situated in the north-west of Iran, with a cold mountain climate. Solar collectors are also integrated into the DHS as a supplementary heat source. To this aim, three different renewable-energy-based district heating scenarios, viz. a Ground-Source-HP-based (GSHP), a combined GSHP-flat-plate-solar-collector (GSHP-SFPC), and a combined GSHP-linear-parabolic-solar-collector... 

The goal of this study is the experimental and numerical investigation of using pulsating heat pipes (PHPs) as substitutes for fins in a typical air-cooled heat exchanger. Due to the small temperature difference between the cooling air and internal airflow in the case study, it was necessary that appropriate PHPs with the capability to work in small temperature difference conditions be investigated and an appropriate working fluid be selected. After reviewing various studies, R134a was selected as the best working fluid from the heat transfer standpoint. Afterward, a testing device was designed and fabricated. Additionally, in order to predict the behaviors of the main tubes with pulsating... 

In this study, a vapor-compression cooling system utilizing different phase change materials (PCMs) has been studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of cooling systems with and without using PCM is evaluated for the hottest day of the year. The proposed system uses the cooling energy to freeze, or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored thermal energy during the peak load hours by melting, or “charging” the PCM. This leads to better performance during peak load hours when higher cooling loads are needed. Different PCMs including oleic acid, SP224A, CL, CaCl2·6H2O... 

Solar systems are the most promising technologies to reduce building energy consumption. In recent years, one of the popular solar technologies is building integrated photovoltaic-thermal collectors, because of profitability and no need for separate architectural space. In this study, a new combination of glazed building integrated photovoltaic thermal solar collectors and an absorption cooling system, as a trigeneration system, to provide thermal and electrical energy demands of a case study residential building, is proposed. Dynamic simulation of the proposed system is performed using the TRNSYS-MATLAB co-simulator. Because there is no model for the glazed photovoltaic thermal solar... 

Solar energy is turning to one of the important types of clean energies, due to its availability, and its potential for wide range of applications. In this work, a new passive solar desalination system is introduced, which benefits from excellences of twin-glass evacuated tube collectors. For the first time, the evacuated tube collector is not only used as the solar thermal collector, but also as a basin to heat the water. Hence, the thermal resistance between the collector and basin is virtually eliminated. Results show a considerable increase in the rate of desalinated water production and the maximum production reaches up to 0.83 kg/(m2·h). It was observed that the maximum rate of the... 

The solar collectors have been commonly used in desalination systems. Recent investigations show that the use of a linear parabolic through collector in solar stills can improve the efficiency of a desalination system. In this work, a combination of a heat pipe and a twin-glass evacuated tube collector is utilized with a parabolic through collector. Results show that the rate of production and efficiency can reach to 0.27 kg/(m2 h) and 22.1% when aluminum conducting foils are used in the space between the heat pipe and the twin-glass evacuated tube collector to transfer heat from the tube collector to the heat pipe. When oil is used as a medium for the transfer of heat, filling the space... 

The low thermal conductivity of phase change materials has resulted in prolonged melting and freezing processes (charge and discharge) in these materials. This problem has limited the application of these materials in the field of thermal energy storage. In the present study, the effects of adding Fe3O4 magnetic nanoparticles at various concentrations as well as applying the magnetic field on the melting process of paraffin as phase change material have been experimentally studied. Thereupon, a cubic chamber in which the left wall applied a constant heat flux was used. At the optimum concentration of nanoparticles (1 mass%), the constant magnetic field with the intensities of 0.01 T and... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

In this paper, a new configuration of a solar combined cooling, heating, and power (CCHP) system is proposed to recover the waste thermal energy of a steam power plant, which provides the cooling and heating needs of an apartment complex located in Tehran. The required energy of the system is supplied by the parabolic trough solar collectors (PTCs) and, if necessary, an auxiliary heater is also used. An ejector refrigeration cycle (ERC) and a steam Rankine cycle are used for cooling and power generation, respectively. The cycle is dynamically modeled over a year using a TRNSYS-EES co-simulator. It is found that the highest Rankine cycle efficiency is obtained in the cold months (January)... 

In this survey, the integration of a vapor compression cycle with a phase change material (PCM) storage tank has been evaluated experimentally during the hottest days of five cities with different weather conditions: Tehran, Ramsar Hamedan, Bushehr, and Ahvaz. The temperature conditions for outdoor (condenser, compressor, etc.) and indoor (evaporator) air conditioning units are provided with the help of two separated test chambers and a controller system. The desired system has been examined based on two scenarios. In each scenario, the system is assessed for the conventional air conditioning (AC) system (with no PCM involved) and the AC plus PCM unit. Based on scenario 1 operating strategy,...