Sharif Digital Repository

In this paper, the stable and reproducible tellurium doped ZnO nanowires (Te-ZnO NWs) photodetector with intensive responsively is presented. The Te-ZnO NWs were fabricated by physical vapor deposition (PVD) growth mechanism. Field emission scanning electron microscope (FESEM) images showed that the fabricated nanowires were 50 nm in diameter and several microns in length. The high resolution transmission electron microscopy indicated that the synthesized nanowires were crystalline and their phase characterization was validated by the X-ray diffraction (XRD). The photoluminescence (PL) studies of these nanowires showed a strong photoluminescence (PL) emission peak in the green region. It was... 

The highly sensitive impedimetric biosensor in label free approach for hepatitis B virus DNA (HPV DNA) detection based on tellurium doped ZnO nanowires was fabricated. The NWs were grown by hybrid thin film oxidation in the physical vapor deposition (PVD) mechanism. The morphology characterization of the synthesized NWs was performed by field emission scanning electron microscopy (FESEM) and the images demonstrated that the diameter and the length of the materialized NWs were around 50 nm and several micrometers, respectively. The high-resolution transmission electron microscopy (HRTEM) image indicated that the fabricated NWs were crystalline and their phase characterization was validated by... 

In this research, synthesis of lanthanum oxide nanoparticles using supercritical water as a reaction medium in batch type reactor was studied. The crystallographic identity and morphology of the synthesized nanoparticles were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD patterns indicate that the well-crystallized lanthanum oxide nanocrystals can be easily obtained under the current synthetic conditions. The effect of four parameters includes temperature, reaction time; primary concentration of aqueous solution of lanthanum (III) nitrate and pH of starting solution on reaction efficiency, particle size and the BET surface area were investigated... 

Single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized in aqueous solutions containing FeCl2, FeCl3, FeSO4 and Fe2(SO4)3. The effects of iron charge and the counter ions on the formation of carbon nanotubes (CNTs) were investigated. Thermogravimetric (TG) analysis indicated that carbon multilayer structures including CNTs and multishell graphite particles were formed in deionized (DI) water without the iron precursor. SWCNTs were also synthesized in the presence of the iron ions. It was also found that the mole ratio of [Fe2+]/[Fe3+] in the solution has a significant influence on the purity of CNTs and the process yield. The highest yield was... 

Nowadays there are more than thirty maturity models in different knowledge areas. Maturity model is an area of interest that contributes organizations to find out where they are in a specific knowledge area and how to improve it. As Information Resource Management (IRM) is the concept that information is a major corporate resource and must be managed using the same basic principles used to manage other assets, assessment of the current IRM status and reveal the improvement points can play a critical role in developing an appropriate information structure in organizations. In this paper we proposed a framework for information resource management maturity model (IRM3) that includes ten best... 

This paper presents a new mechanism with unique and prominent features for a helical swimmer robot. "Double Helices Propulsion Mechanism" consists of two parallel helices with a single axis rotating in the same direction. The outer helix acts as the main propulsion component, and the inner helix, which is made of a Shape Memory Alloy (SMA), controls the forward velocity during swimming. This mechanism, by varying the geometrical parameters of its helical tail, can change the forward velocity of the helical swimmer robot that is required by its predefined missions. In order to study the effects of geometric parameters on the forward velocity in the single helical swimmer, a hydrodynamic model... 

The use of Computer Science in order to categorize and store information, improve diagnostic and therapeutic procedures, patient education and the training of a skilled labor force, has taken important steps and there are constantly new developments in this area  

Data Envelopment Analysis (DEA) is a method to measure the efficiency of a DMU (Decision Making Unit, e.g. school, public agencies and banks). One of the ways for determining rank of DMUs is efficient score of each DMU. An interesting research issues is to discriminate between efficient DMUs. In literatures, supper efficiency is an applicable method for ranking efficient DMUs. The main drawback of this method is an inability of this method to rank non-extreme efficient DMUs. Therefore, this issue reduces the usefulness of this method. In this paper we propose a new ranking system for non-extreme efficient DMUs (Decision Making Units) based upon the omission of DMUs from reference set of the... 

The purpose of this paper is to present a polynomial time algorithm which determines the lot sizes for purchase component in Material Requirement Planning (MRP) environments with deterministic time-phased demand with zero lead time. In this model, backlog is not permitted, the unit purchasing price is based on the all-units discount system and resale of the excess units is possible at the ordering time. The properties of an optimal order policy are argued and on the basis of them, a branch and bound algorithm is presented to construct an optimal sequence of order policies. In the proposed B&B algorithm, some useful fathoming rules have been proven to make the algorithm very efficient. By... 

Simulation is the gold standard for training in aviation and trauma medicine. Now it is available for diseases diagnosis and treatment. With simulation, clinicians can practice their art in a realistic, consequence free environment, combining both theory and practice in a comprehensive program. Method and materials - In the virtual clinical environment of "VPsoft mentor" software, the practitioner reviews a patient's history, orders laboratory tests and procedures, interprets findings, renders diagnoses, and prescribes medication. Every diagnostic or treatment decision the clinician makes for the patient is analyzed by E-mentor, providing instant feedback.Results - This software have been... 

In this study, the effects of pulse current parameters on corrosion resistance and mechanical properties of anodized coatings were evaluated. Hardness measurements, polarization and electrochemical impedance spectroscopy tests were employed to investigate the mechanical properties and corrosion behavior of these coatings. Also, field emission scanning electron microscopy (FE-SEM) was used to analyze the surface morphology and microstructure of the coatings. It was found that the properties of anodized coatings were dependent on various parameters, among which, time, temperature and pulse current parameters (current density limit, frequency and duty cycle) were optimized. Analysis of Variance... 

Calculation of camera projection matrix, also called camera calibration, is an essential task in many computer vision and 3D data processing applications. Calculation of projection matrix using vanishing points and vanishing lines is well suited in the literature; where the intersection of parallel lines (in 3D Euclidean space) when projected on the camera image plane (by a perspective transformation) is called vanishing point and the intersection of two vanishing points (in the image plane) is called vanishing line. The aim of this paper is to propose a new formulation for easily computing the projection matrix based on three orthogonal vanishing points. It can also be used to calculate the... 

Novel types of highly swelling hydrogels were prepared by grafting crosslinked polyacrylamide-co-poly-2-acrylamido-2-methylpropane sulfonic acid (PAAm-co-PAMPS) chains onto sodium alginate (Na-Alg) through a free radical polymerization method. The superabsorbent formation was confirmed by Fourier transform infrared spectroscopic (FTIR). The controlled release behavior of diclofenac sodium (DS) from superabsorbent polymer was factinvestigated, and shown that the release profiles of DS from superabsorbent polymer were slow in simulated gastric fluid (SGF, pH 1.2) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 7.4) within 21 h after... 

Novel types of highly swelling hydrogels were prepared by grafting crosslinked polyacrylic acid-co-poly-2-acrylamido-2-methylpropanesulfonic acid (PAA-co-PAMPS) chains onto κ-carrageenan through a free radical polymerization method. Here, we propose a mechanism for κ-carrageenan-g-PAA-co-PAMPS formation and confirm the hydrogel structure using FTIR spectroscopy. The effect of grafting variables (i.e. concentration of methylenebisacrylamide (MBA), acrylic acid/-2-acrylamido-2-methylpropanesulfonic acid (AA/AMPS) weight ratio, ammonium persulfate (APS), κ-carrageenan, neutralization percent and reaction temperature) were systematically optimized to achieve a hydrogel with a maximum swelling... 

The subject of the present paper is the investigation of the sharp edged gust effects on the aeroelastic behavior of a flexible wing. It is important to determine the response of the wing to the atmospheric turbulences during normal flight. So, linear modal analysis technique and linear quasi-steady aerodynamic are used for structural modeling and aerodynamic loading, respectively. Also, Lagrange method is used to obtain the system of equations of motion. Using the normal modes of free vibration, structural and aerodynamic matrices can be constructed. Then the aeroelastic instability of the system is determined using p method. Kussner function is used to model the sharp gust effects on the... 

In dealing with human nervous system, the sensation of pain is as sophisticated as other physiological phenomena. To obtain an acceptable model of the pain, physiology of the pain has been analysed in the present paper. Pain mechanisms are explained in block diagram representation form. Because of the nonlinear interactions existing among different sections in the diagram, artificial neural networks (ANNs) have been exploited. The basic patterns associated with chronic and acute pain have been collected and then used to obtain proper features for training the neural networks. Both static and dynamic representations of the ANNs were used in this regard. The trained networks then were employed... 

A novel superabsorbent hydrogel composed of carboxymethylcellulose (CMC) and sodium alginate (Na-Alg) was prepared by using methylenebisacrylamide (MBA) as a crosslinking agent. Ammonium persulfate (APS) was used as an initiator. For investigation of the effect of reaction variables on water absorbency of the hydrogels, the synthetic conditions were systematically optimized through studying the influential factors, including temperature, Na-Alg/CMC weight ratio and concentration of MBA and APS. Increase in MBA and APS concentration results in the decrease in water absorbency of the hydrogels. The water absorbency of the hydrogels increased with increasing of reaction temperature and... 

This paper presents a low-order and accurate method for the design of FIR fractional delay (FD) filters with complex coefficients. This method employs least square technique in Hilbert space to approximate the ideal FD transfer function with a FIR filter and to calculate its coefficients. The main advantages of the resulting filter are: very good response at all frequencies compared to other FD filter design methods and a good method to create very small delay. Design examples are presented to illustrate the effectiveness of this new design approach. © World Scientific Publishing Company  

One of the most important issues in railway wheels is residual stresses. It is desirable to produce less residual stresses when possible and to decrease the remaining residual stresses in the wheels. The objective of this paper is to provide an estimation of the residual stresses in the rail wheel caused by the stress field from heat treatment process of a railway wheel. A three-dimensional nonlinear stress analysis model has been applied to estimate stress fields of the railway mono-block wheel in heat treatment process. After forging or casting, railway wheels are heat-treated to induce the desirable circumferential compressive residual stress in the upper rim. Finite element analysis... 

This study investigates different types of career orientation of a sample of Iranian software engineers and antecedents of these orientations. A qualitative study was conducted in seven Iranian small to large sized companies, where forty-nine software engineers were interviewed. Using the thematic analysis technique, technical, managerial, entrepreneurial, project based, and hybrid orientations were identified. For some orientations, several sub-orientations were also identified. In addition, the results propose some antecedents of career orientation, mainly based on engineer needs, competencies and values, which may be moderated by some external factors, including organizational and...