Sharif Digital Repository

The effects of combined task demands on the way muscles are recruited to balance external loads during posture and movement is of great importance in quantitative analysis of upper arm function. Pain and disability of shoulder joint is becoming more important as population spends more often interacting with computers in seated position and carrying repetitive tasks using upper extremities. Shoulder joint that is more dependent on the muscles for its normal function than other joints such as hip due to its small articular surface and large range motion has been used here to study its coordination during isometric exertions. Since, the numbers of tasks that could be performed are enormous. In... 

Isogeometric Analysis method is a newly introduced method for the analysis of problems governed by partial differential equations.The major difference between classic finite element method and isogeometric method is that FEA uses piecewise polynomial shape functions for analysis while the Non-Uniform Rational B-Splines (NURBS) functions are applied as basis function in isogeometric method. To model strong discontinuities like cracks in classical finite element method , very fine mesh near the crack tip must be used. Application of eXtended Finite Element Method (X-FEM) avoid making very fine mesh near crack tip which is a time consuming task. In the extended finite element method , a... 

Fog computing environment consists of several devices which distribute across an arbitrary topology. Each of these devices is capable of carrying out a designated computation simultaneously with other devices. One of the common ways of describing a computation is through the usage of workflows. Workflow is a flexible and formal way of modeling tasks and their requirements for execution. A workflow is essentially a DAG. Therefore, it can model the data dependency between tasks quite accurately. The complex structure of a workflow in conjunction with the homogenous nature of devices in a fog environment makes it difficult to find a resource management algorithm to minimize execution time, used... 

This project focuses on the design of fuel drop tanks for airplanes that add minimal drag and positive lift to the flying object. This will obviously effect the stability and dynamic performance of the airplane. To reduce adverse dynamic effects the tank was divided to several segment with a special emptying sequence. The add-on tank has to have no interference with the object existing systems and require minimum structural changes in the object. Several designs were proposed and the one gaining highest marks was selected. The flow field and the dynamic behavior of combined vehicle and drop tanks were studied using FE simulations. The result shows that adding a drop tank with optimized... 

Cancer can be defined as a stochastic phenomenon. Thus, the tumor growth can be defined as a stochastic process. A Cancer tumor can be analyzed by its geometric shape. Furthermore, computing fractal dimension of shapes is a useful technique to analyze chaosity and complexity of shapes. This approach can be used to compare results from laboratory with simulated results of a mathematical model. A stochastic model of tumor growth will be presented. And some geometrical properties will be analyzed through computer simulation of the model  

In the present study, the axisymmetric liquid gas/air diffusion flame in the presence of fuel concentration oscillations and velocity perturbations has been investigated experimentally. Several industrial combustions take a place by diffusion mechanism which necessitate scientists to make far better understanding of diffusion flames. In order to study diffusion flames, the instrument with two separated lines of fuel and air has been developed. Nitrogen is used for fuel dilution oscillatory with pulse of 1, 2, and 4 Hz frequencies. The pulse duration effects on flame structure are also studied. The flame shape has been captured by high speed camera and the results are processed by image... 

This research evaluates the effect of external corrosion geometry and bending moment on the burst pressure of pipes. In recent decades, the use of natural resources of offshore oil and gas has increased, as a result, the use of offshore pipelines for transferring products has grown dramatically. At the same time, numerous accidents and explosions in offshore pipelines and its economic and environmental consequences indicates the importance of ensuring safe operation. Pipeline Integrity Management has been developed to ensure safe and efficient operation of pipelines. Integrity management includes planning, inspection, evaluation and repair. This cycle is checked continuously. The importance... 

Burner scaling criteria have been studied and the most appropriate one has been selected to scale down a large industrial burner. The sub-scaled non-premixed swirl-stabilized burner is manufactured to ensure that the available experimental setup and equipment are sufficient and practical for characterizing the burner. The aim of the research is to assist the future design optimization with the identifications which have been done. The constant residence time method is selected in this project and it is shown that this is the proper criteria for non-premixed and swirl-stabilized burners. For better identification, stability maps of the flame are extracted with the experimental methodology for... 

The purpose of this study was to create a three-cationic electro phosphate coating of zinc-nickel-manganese by cathodic method and to investigate the effect of operating variables on the properties of zinc-nickel-manganese tri-cationic electro phosphate coating. Hence, the effects of variables such as coating acidity, coating thickness, coating temperature, coating time and concentration of manganese were studied in the bath on the properties such as coating morphology, corrosion resistance, coating thickness. Coating morphology was characterized by scanning electron microscopy and corrosion resistance by polarization test. The pH values of 1.4, 1.8, 2 and 2.2 were selected, and the results... 

A special steel beam-to-column connection, named Khor-jini, is commonly used for steel framing system in Iran. In this system, two continuous beams are passed next to the columns and are connected to the column side using seated brackets.This type of connection has been common in Iran from the late past. Unfortunately, the seismic behavior of Khorjini frames had not been sufficiently studied prior to Manjil Earthquake of 1990. Due to very large damages which occurred in steel structures especially in connections during the said earthquake, the seismic behavior of this type of connection was studied and some of its weak points were recognized.In this study non-linear... 

Cloud computing is a way to increase capacity or add capabilities dynamically without investing in new infrastructure. The purpose of this project is the use of specialized algorithms for efficient energy management for cloud computing environments.One of the issues that is very important with respect to cloud computing is considering lifetime of servers or physical machines. Servers are some of the most important and critical elements of cloud computing. Server costseffect on the costs of the entire cloud computing system and the interference of serverseffects on entire system. Lifetime of each sever is dependent on a few factors, the most important of which is the number of switching... 

In the present research, model-based reasoning is introduced and explained based on Giere’s explanation of model. In other word, this research could be regarded as a reconstruction of model in Giere’s books and papers due to prpose a clear explanation of model-based reasoning. In the second chapter, after the introduction, the concept of model in Giere’s distinguished book, “Explainnig Science: A Cognitive Approach” (1988) is introduced and analyzed. In the second chapter, however, the concept of model in Giere’s recent works is traced. “An agent-based account of model” and “focusing on functionality rather than ontology” could be explained as the two important differences between his... 

Airport saturation is one of the important issues which have always been of the specialists’ concern. One of the major applications of this subject is at the airport approach problems. While using current conventional approach procedures have many disadvantages regarding high fuel consumption and subsequent much environmental and noise pollution, the CDA concept which is one of the modern topics introduced in consequence of free flight theory, has less such disadvantages compared to conventional approach. Subject of this study is to investigate whether Procedural approach or CDA saturates an aiport sooner if the traffic flow increases. In this dissertation, using BADA database, CDA...