Sharif Digital Repository

Surface tension driven passive micro-pumping relies mainly on the surface tension properties. To have control over surface tension driven passive micro-pumps (STD-PMPs), it is essential to understand the physical background of the fluid flow in these pumps. Hence, the purpose of this work is to give an exploration of the flow physics of a STD-PMP. In this regard, computer simulation is used to give detailed information about the flow pattern and physical phenomena at different conditions. To this end, a droplet of water, with a specified diameter, is placed onto an entry port connected to another droplet at the exit port via a microchannel. The results indicate that the pumping process, in... 

In this paper. 11This article is a revised version of Daneshgar and Hajiabolhassan (2008) [19] distributed on arXiv.org (1'st, Jan. 2008). we consider higher isoperimetric numbers of a (finite directed) graph. In this regard we focus on the nth mean isoperimetric constant of a directed graph as the minimum of the mean outgoing normalized flows from a given set of n disjoint subsets of the vertex set of the graph. We show that the second mean isoperimetric constant in this general setting, coincides with (the mean version of) the classical Cheeger constant of the graph, while for the rest of the spectrum we show that there is a fundamental difference between the nth isoperimetric constant and... 

Context-awareness is an essential requirement of modern access control models. Organization-Based Access Control (OrBAC) model is a powerful context-aware access control model defined by first-order logic. However, due to the monotonicity nature of the first-order logic, OrBAC suffers from the incapability of making decision based on incomplete context information as well as the definition of default and exception policy rules. This paper proposes augmenting non-monotonicity features to OrBAC using MKNF+ logic, which is a combination of Description Logic (DL) and Answer Set Programming (ASP). Along with the use of DL to define ontology for main entities and context information in OrBAC;... 

Capillary pressure experiments were performed at the water/hexane interface including adsorption and mass exchange of hexanol under different conditions. The results from growing drop experiments show that instabilities due to Marangoni convection not only depend on the same parameters as have been reported for quasi-static interfaces, such as direction of mass transfer, distribution coefficient and ratio of diffusion coefficients, but also on the experimental conditions such as dispersed phase flow rate, capillary tip size, size of growing drop and its lifetime. Based on a new flow expansion model for mass transfer, a new approach is presented for data analysis, which includes the various... 

The inflow pattern of liquid into a droplet is studied experimentally using a surface active dye and compared with results of CFD simulations. The results show visual agreement between experiments and simulations. The CFD simulations show also good agreement with the surface tension measured by drop profile analysis tensiometry (PAT). The inflow of the surfactant induces a Marangoni instability caused by the local arrival of the surfactant at the drop surface. The onset of this Marangoni instability observed experimentally has a delay of about 10. s when compared with the simulation results. Different scenarios are discussed, including a boundary layer barrier, a kinetic-controlled... 

For the reason that flow expansion model (developed in our previous work) for evaluating mass transfer during droplet formation involves with manifest hydrodynamic aspects, in this research computational simulation of this phenomenon was done for characterization of hydrodynamics effects on the mass transfer during droplet formation. For this purpose, an Eulerian volume tracking computational code based on volume of fluid (VOF) method was developed to solve the transient Navier-Stokes equations for the axisymmetric free-boundary problem of a Newtonian liquid that is dripping vertically and breaking as drops into another immiscible Newtonian fluid. The effects of hydrodynamics effects on the... 

The kinetics of coalescence is studied experimentally using a new technique for tracking the process in the bulk phase. For this aim, aqueous solutions of KSCN (colorless) and FeCl3 (light yellow) are used to make individual W/O emulsions. Any coalescence occurred between drops containing KSCN solution and those containing FeCl3 solution would combine these solutions. This leads to a reddish brown solution due to the formation of iron(III)thiocyanate. The intensity change of this red color with time represents the dynamics of coalescence occurring between drops of different emulsified aqueous droplets. The detector response to any changes in the system is recorded as a function of time. In... 

The transformerless single-phase semi-quasi-Z-source inverter (SqZSI) has a nonlinear gain curve and requires nonlinear sinusoidal pulse width modulation (NLSPWM) to achieve sinusoidal voltage at the output AC terminal. Although the SqZSI provides some advantages, for example, leakage current elimination, doubly grounded, low volume, and low cost, it needs nonlinear modulation control. The NLSPWM is relatively complex among single-phase modulation methods and it is considered a disadvantage for this topology, so this paper presents a model-driven processor programming method that facilitates the implementation of NLSPWM. The developed programming method utilizes a Blockset environment in... 

This paper is aimed at investigating some computational aspects of different isoperimetric problems on weighted trees. In this regard, we consider different connectivity parameters called minimum normalized cuts/isoperimetric numbers defined through taking the minimum of the maximum or the mean of the normalized outgoing flows from a set of subdomains of vertices, where these subdomains constitute a partition/subpartition. We show that the decision problem for the case of taking k-partitions and the maximum (called the max normalized cut problem NCP^M), and the other two decision problems for the mean version (referred to as IPP^m and NCP^m) are NP-complete problems for weighted trees. On... 

In the absence of powerful rigorous models, in this research a simple but practical method for calculating the temperature and residence time and carbon black yield in oil-furnace reactors is proposed. For this purpose an empirical formula of the form CXHY is assumed for the carbon black feedstock based on typical feedstock used in this industry. Based on the prevailing reactor conditions, thermodynamic considerations and available outlet tail gas from the reactor, a few representative reactions are considered to describe the entire reaction network. These include complete combustion for the fuel and, incomplete combustion and pyrolysis for the feedstock. Carbon black yield can be estimated... 

An optimal performance film cooling implies a high cooling effectiveness along with a wide surface cooling coverage. During the past decades, film cooling effectiveness has been well defined with a specific formula to evaluate the quality of a cooling system. However, despite numerous research on film cooling, there is still no explicit parameter to quantify how well a coolant film is spread over a hot surface. This work introduces a new coefficient namely cooling uniformity coefficient (CUC) to evaluate how well a coolant film is spread over a surface that is being cooled. Four different cases at two blowing ratios of 0.5 and 1.5 are studied. Three cases are ordinary single jets with... 

For many years the model of a dynamic adsorption layer (DAL) is well established as explanation for the behavior of rising bubbles in surfactant solutions. This model explains the velocity profile and the evolution of the shape of a rising bubble based on the hypothesis of the balance between the drag force and the structure of the adsorbed layer governed by Marangoni convection. However, direct measurements of interfacial properties of the bubble during rising are a real challenge. Here we present a new experimental protocol called "bubble in flow field" suitable for direct measurements of dynamic interfacial properties of a bubble surface using the capillary pressure tensiometry under... 

This paper illustrates the use of a combined neural network model for classification of electrocardiogram (ECG) beats. We present a trainable neural network ensemble approach to develop customized electrocardiogram beat classifier in an effort to further improve the performance of ECG processing and to offer individualized health care. We process a three stage technique for detection of premature ventricular contraction (PVC) from normal beats and other heart diseases. This method includes a denoising, a feature extraction and a classification. At first we investigate the application of stationary wavelet transform (SWT) for noise reduction of the electrocardiogram (ECG) signals. Then... 

A novel modified carbon-paste electrode was employed for the simultaneous determination of dopamine (DA) and ascorbic acid (AA) with good selectivity and high sensitivity. Silver nanoparticle and carbon nanotube modified carbon-paste electrode (Ag/CNT-CPE) displayed excellent electrochemical catalytic activities towards dopamine (DA) and ascorbic acid (AA). The oxidation overpotentials of DA and AA were decreased significantly compared with those obtained at the bare CPE. Differential pulse voltammetry was used for the simultaneous determination of DA and AA. The peak separation between DA and AA was 67 mV. The calibration curves for DA and AA were obtained in the range of 8.0 × 10-7-6.4 ×... 

Dilational and shear viscoelasticities are important properties of interfacial layers. These quantities are particularly relevant in all systems which contain a huge internal interfacial area such as foams and emulsions. Therefore, also the 3D rheological behavior of foams or emulsions studied by respective methods is superimposed by the 2D interfacial rheology.We report on recent developments in dilational and shear rheology from an experimental point of view as well as discuss the state of the art of the underlying theories. Examples of most relevant experiments are also presented and discussed. Although not yet extensively investigated, the links between bulk rheology of foams and... 

With modified measuring procedure and measuring cell design in the drop profile tensiometer PAT, it became possible to study the rate of water evaporation through adsorbed or spread surface layers. This method was employed to measure the rate of water evaporation from drops covered by adsorbed layers of some proteins and surfactants, in particular n-dodecanol. It was shown that the formation of dense (double or condensed) adsorbed layers of protein and the formation of 2D-condensed n-dodecanol layer decrease the water evaporation rate by 20-25% as compared with pure water. At the same time, the adsorbed layers of ordinary surfactants (sodium dodecyl sulfate and nonionic ethoxylated... 

Let LL be a reversible Markovian generator on a finite set View the MathML sourceV. Relations between the spectral decomposition of LL and subpartitions of the state space View the MathML sourceV into a given number of components which are optimal with respect to min–max or max–min Dirichlet connectivity criteria are investigated. Links are made with higher-order Cheeger inequalities and with a generic characterization of subpartitions given by the nodal domains of an eigenfunction. These considerations are applied to generators whose positive rates are supported by the edges of a discrete cycle ZNZN, to obtain a full description of their spectra and of the shapes of their eigenfunctions, as... 

In this paper1 we consider higher isoperimetric numbers of a (finite directed) graph. In this regard we focus on the nth mean isoperimetric constant of a directed graph as the minimum of the mean outgoing normalized flows from a given set of n disjoint subsets of the vertex set of the graph. We show that the second mean isoperimetric constant in this general setting, coincides with (the mean version of) the classical Cheeger constant of the graph, while for the rest of the spectrum we show that there is a fundamental difference between the nth isoperimetric constant and the number obtained by taking the minimum over all n-partitions. In this direction, we show that our definition is the... 

The purpose of this study is to predict the activation barriers and enthalpy for elementary steps in the process of Fischer-Tropsch (F-T) on the surfaces of Fe(110), Cu(111) and Fe/Cu alloys catalyst using "Unity Bond Index-Quadratic Exponential Potential" method aimed at predicting the activity and selectivity on the basis of energy criteria. The elementary steps, such as dissociation of CO, hydrogenation of carbidic carbon, C-C chain growth by insertion of CH2 versus CO into the metal-alkyl bonds, and chain termination, which lead to hydrocarbons (alkanes versus α-olefins) or oxygenates are discussed in detail. The results show that metallic Fe(110) is necessary to produce the carbidic... 

A well performance film cooling implies for a high cooling effectives accompanied with a wide cooling coverage. During the past six decades, film cooling effectiveness has been well defined with a specific relation to quantify it. However, despite of numerous film cooling research, there is not an explicit method to quantify the uniformity of a coolant film spread over the hot surfaces. This work introduces a cooling uniformity coefficient (CUC) to evaluate how well a coolant film spreads over a surface being cooled. Four different cases are computationally studied. In the three cases, a single jet is injected into a hot cross flow with different jet exit shapes (i.e. square, spanwise...