Sharif Digital Repository

A novel and cost effective method of bio-separation developed recently is magnetic separation technology. In this study, super paramagnetic Fe3O4 nanoparticles are used for separation of bovine serum albumin (BSA) protein from plasma/serum samples at optimized conditions. The synthesis of chitosan hydrogel networks by two variant approaches that involve (1) crosslinking of chitosan with formaldehyde and (2) formation of carboxy methyl chitosan mediated complex, was investigated and the percent of gelation, swelling ratio and equilibrium water content were calculated. The results revealed the formation of better quality hydrogel from the first approach. In step 1, to quantify the BSA... 

Nowadays power electronic devices have a wide usage in the industries and different electrical equipment for power conditioning. As a point of view, reliability is one of important figure of merits that should be considered to have long life time and also have more probability to do exactly the proposed mission. In this paper some methods are presented to improve the reliability of power electronic components. Also some methods of system reliability improvement are reviewed. One group of converters is DC-DC step down converter which is used in different applications such as battery charger and voltage regulator. In this paper as an example, reliability of a DC-DC step down converter with... 

In this paper the Unsupervised Active Learning Method (UALM), a novel clustering method based on the Active Learning Method (ALM) is introduced. ALM is an adaptive recursive fuzzy learning algorithm inspired by some behavioral features of human brain functionality. UALM is a density-based clustering algorithm that relies on discovering densely connected components of data, where it can find clusters of arbitrary shapes. This approach is a noise-robust clustering method. The algorithm first blurs the data points as ink drop patterns, then summarizes the effects of all data points, and finally puts a threshold on the resulting pattern. It uses the connected-component algorithm for finding... 

Di-(2-ethylhexyl) phosphoric acid coated silanized magnetite nanoparticles were applied for the rapid removal and fast adsorption of molybdenum ions from simulated nitric acid solutions. The characterization of the developed adsorbent was carried out using various analytical techniques such as Transmission electron microscopy (TEM), X-ray diffraction pattern (XRD) and Fourier transform infrared spectroscopy (FT-IR). The Transmission electron microscopy photographs showed that the silanized magnetite nanoparticles were roughly spherical in shape and the average size of these particles is very close to the average size of bare magnetite particles. The binding of silane polymer and... 

We present a new model and a new approach for solving fuzzy linear programming (FLP) problems with various utilities for the satisfaction of the fuzzy constraints. The model, constructed as a multi-objective linear programming problem, provides flexibility for the decision maker (DM), and allows for the assignment of distinct weights to the constraints and the objective function. The desired solution is obtained by solving a crisp problem controlled by a parameter. We establish the validity of the proposed model and study the effect of the control parameter on the solution. We also illustrate the efficiency of the model and present three algorithms for solving the FLP problem, the first of... 

In this paper, we propose a novel density-based fuzzy clustering algorithm based on Active Learning Method (ALM), which is a methodology of soft computing inspired by some hypotheses claiming that human brain interprets information in pattern-like images rather than numerical quantities. The proposed clustering algorithm, Fuzzy Unsupervised Active Learning Method (FUALM), is performed in two main phases. First, each data point spreads in the feature space just like an ink drop that spreads on a sheet of paper. As a result of this process, densely connected ink patterns are formed that represent clusters. In the second phase, a fuzzifying process is applied in order to summarize the effects... 

Evapotranspiration is one of the main components of water and energy balance. In this study, we compare two ET products, suitable for regional analysis at high spatial resolution: The recent WaPOR product developed by FAO and METRIC algorithm. WaPOR is based on ETLook, which is a two-source model and relies on microwave images. WaPOR is unique as it has no limitation under cloudy days, but METRIC is limited by clouds. METRIC and WaPOR are more sensitive to land surface temperature and soil moisture, respectively. Using two years (2010 and 2014) of data over Lake Urmia basin, we show that in most areas, ET from METRIC is higher than WaPOR and the difference has an ascending trend with the... 

In this paper, we propose a novel density-based fuzzy clustering algorithm based on Active Learning Method (ALM), which is a methodology of soft computing inspired by some hypotheses claiming that human brain interprets information in pattern-like images rather than numerical quantities. The proposed clustering algorithm, Fuzzy Unsupervised Active Learning Method (FUALM), is performed in two main phases. First, each data point spreads in the feature space just like an ink drop that spreads on a sheet of paper. As a result of this process, densely connected ink patterns are formed that represent clusters. In the second phase, a fuzzifying process is applied in order to summarize the effects... 

In this paper, we propose a fuzzification method for clusters produced from a clustering process, based on Active Learning Method (ALM). ALM is a soft computing methodology which is based on a hypothesis claiming that human brain interprets information in pattern-like images. The proposed fuzzification method is applicable to all non-fuzzy clustering algorithms as a post process. The most outstanding advantage of this method is the ability to determine the membership degrees of each data to all clusters based on the density and shape of the clusters. It is worth mentioning that for existing fuzzy clustering algorithms such as FCM the membership degree is usually determined as a function of... 

The aim of this research work is to investigate sorption characteristic of acid treated brown algae Sargassum bevanom (acid treated S. bevanom) for the removal of Cr(VI) ions from aqueous solutions. The acid-treated alga was prepared by transferring the S. bevanom into 0.5. M HCl and then stirring the mixture at 300. rpm for 6. h at room temperature. The sorption of Cr(VI) ions by batch method is carried out. The optimum conditions of biosorption were found to be: a biomass dose of 0.7. g in 100. ml of Cr(VI), contact time of 110. min and pH 3, respectively. In optimum condition, removal efficiency was 89.64%. It was found that temperature has a positive effect on the removal efficiency.... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50...