Loading...
Search for: jeddi--reza
0.133 seconds

    Joint order (1, T) policy for a two-echelon, single-item, multi-retailer inventory system with Poisson demand

    , Article Computers and Industrial Engineering ; Volume 119 , 2018 , Pages 353-359 ; 03608352 (ISSN) Tayebi, H ; Haji, R ; Ghalebsaz Jeddi, B ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    This study considers a two-echelon inventory system with one central warehouse and a number of non-identical retailers with Poisson demands, constant lead times, and lost sales for a single item. The warehouse works as a cross-docking terminal with no inventory and coordinates shipments to retailers. We apply the Joint order (1, T) policy in such an inventory system. In the standard (1, T) policy, the warehouse sends one unit of the item to each retailer in a fixed cycle time, which is calculated by considering each retailer separately. In the joint order (1, T) policy, the warehouse decides to replenish one unit of the item for each retailer in a cycle time which is adjusted to be an... 

    Study of mixed-convection heat transfer from an impinging jet to a solid wall using a finite-element method - Application to cooktop modeling

    , Article Numerical Heat Transfer, Part B: Fundamentals ; Volume 46, Issue 4 , 2004 , Pages 387-397 ; 10407790 (ISSN) Karzar Jeddi, M ; Kazemzadeh Hannani, S ; Farhanieh, B ; Sharif University of Technology
    2004
    Abstract
    The mixed-convection flow from a hot vertical impinging jet on a colder horizontal disc has been studied. The geometry is analogous to a conventional burning gas cooktop. A numerical simulation of the system has been carried out using the finite-element method to study the dependence of fluid flow and heat transfer on the geometric, thermal, and fluid flow parameters. Results show that heat transfer efficiency versus several parameters such as inlet velocity magnitude and flue gas temperature has an optimum value, in which heat transfer efficiency is maximum. With thermal conductivity of the solid wall, velocity angle, and solid wall diameter heat transfer efficiency has increasing behavior.... 

    A multi-product continuous review inventory system with stochastic demand, backorders, and a budget constraint

    , Article European Journal of Operational Research ; Volume 158, Issue 2 , 2004 , Pages 456-469 ; 03772217 (ISSN) Ghalebsaz Jeddi, B ; Shultes, B. C ; Haji, R ; Sharif University of Technology
    2004
    Abstract
    Common characteristics of inventory systems include uncertain demand and restrictions such as budgetary or storage space constraints. Several authors have examined budget constrained multi-item stochastic inventory systems controlled by continuous review policies without considering marginal shortage costs. Existing models assume that purchasing costs are paid at the time an order is placed, which is not always the case since in some systems purchasing costs are paid when orders arrive. In the latter case the maximum investment in inventory is random since the inventory level when an order arrives is a random variable. Hence payment of purchasing costs on delivery yields a stochastic budget... 

    Soil-pile Inelasticity Effect on Displacement Response of Piled Structures

    , M.Sc. Thesis Sharif University of Technology Bagheri Jeddi, Ashkan (Author) ; Mohtasham Dolatshahi, Kiarash (Supervisor)
    Abstract
    The common approach toward soil-pile-structure interaction phenomenon is that it will cause an increase in both effective natural period and damping ratio. Therefore, considering such a phenomenon in design and analysis of piled structures, will lead to smaller displacements. This attitude has gone far in a way that in different suggestions in various practices, this subject is neglected in a conservative manner. In this study, by investigating the response of a single degree of freedom structure founded on a pile group as the first vibrational mode of a structure, by the means of calculating several displacement ratios, has been proved that soil-pile-structure interaction can cause an... 

    A New Procedure for Derivation of Fragility Curve with Endurance Time Method

    , M.Sc. Thesis Sharif University of Technology Jeddi, Mohammad (Author) ; Estekanchi, Homayoon (Supervisor) ; Mahsuli, Mojtaba (Supervisor)
    Abstract
    This project aims at the calculation of response distribution of a structure using Endurance Time Analysis (ETA). The traditional approach for this calculation is Incremental Dynamic Analysis (IDA). One of the drawbacks of the IDA is its excessive computational complexity. In the ETA, the structure is analyzed using a set of artificial ground motions with increasing intensities as time passes. As a result, the ETA can be used to calculate the response distribution of the structure in a range of intensities. In the traditional ETA, only the median of the response is calculated. In this study, the response distribution is calculated as well as the median. To achieve this, the proposed approach... 

    Carbon black-intercalated reduced graphene oxide electrode with graphene oxide separator for high-performance supercapacitor

    , Article Journal of Nanostructures ; Volume 9, Issue 4 , 2019 , Pages 639-649 ; 22517871 (ISSN) Jeddi, H ; Rasuli, R ; Ahadian, M. M ; Mehrabi, B ; Sharif University of Technology
    University of Kashan  2019
    Abstract
    We present a general study on a high performance supercapacitor based on intercalated reduced graphene oxide with carbon black nanoparticles. Graphene oxide sheets were synthesized by oxidation and exfoliation of natural graphite and were reduced using hydroiodic acid in the presence of carbon black nanoparticles. Graphene paper was fabricated by one-step procedure via simultaneous reducing and drying the aqueous solution of mixed carbon black nanoparticles and graphene oxide on a conductive substrate. Transmission electron microscopy confirmed the intercalation of carbon black nanoparticles into reduced graphene oxide sheets, preventing them from restacking during the fabrication of paper.... 

    Mathematical modeling of cooking pots' thermal efficiency using a combined experimental and neural network method

    , Article Energy ; Volume 31, Issue 14 , 2006 , Pages 2969-2985 ; 03605442 (ISSN) Hannani, S. K ; Hessari, E ; Fardadi, M ; Jeddi, M. K ; Sharif University of Technology
    Elsevier Ltd  2006
    Abstract
    A mathematical framework to model the heat transfer efficiency of cooking pots is proposed and exploited in this paper. The model consists of combining the experimental results and the statistical data of Residential Energy Consumption Survey (RECS) of Iran with a soft-computing concept such as neural network. Using neural network results, the variations of the efficiency with various parameters have been studied. It is shown that Group Method of Data Handling (GMDH)-type neural network can effectively model and predict thermal efficiency, as a function of important input parameters for a conventional cooking pot. Results show that efficiency increases with increasing diameter to flame... 

    Comparison and Improving of Free Surface Modeling Methods In Moving Grids

    , M.Sc. Thesis Sharif University of Technology Jeddi, Reza (Author) ; Seif, Mohammad Saeed (Supervisor) ; Nouri Borujerdi, Ali (Supervisor)
    Abstract
    In the present study a through comparison has been made between different free surface modeling methods. Methods for improving the current schemes are analyzed and studied. Among different proposed methods and based on the current in-house CFD solver’s limitations and capabilities, the Flux-Blending Strategy has been used for interface capturing in the framework of the Finite Volume Method (FVM). The proposed scheme has been coupled with other algorithms for improving the capabilities and functionality of the general computational fluid dynamic software, NUMELS, in order to simulate fluid flows with sharp interface.
    The improved interface capturing scheme uses the continuous switching... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Analysis and data-based reconstruction of complex nonlinear dynamical systems : using the methods of stochastic processes

    , Book Rahimi Tabar, M. Reza
    Springer International Publishing  2019
    Abstract
    This book focuses on a central question in the field of complex systems: Given a fluctuating (in time or space), uni- or multi-variant sequentially measured set of experimental data (even noisy data), how should one analyse non-parametrically the data, assess underlying trends, uncover characteristics of the fluctuations (including diffusion and jump contributions), and construct a stochastic evolution equation?
    Here, the term "non-parametrically" exemplifies that all the functions and parameters of the constructed stochastic evolution equation can be determined directly from the measured data.
    The book provides an overview of methods that have been developed for the analysis of... 

    Fabrication and Study of Mechanical Behavior of in Situ Microfibrillar- Reinforced Composites of Polypropylene/Recycled Poly (Ethylene Terephthalate)Toughened with Rubber Particles

    , M.Sc. Thesis Sharif University of Technology Motahari, Tayebeh (Author) ; Bagheri, Reza (Supervisor) ; Alizadeh, Reza (Supervisor)
    Abstract
    The use of polymers is increasing day by day due to low density, reasonable price and ability to produce different products. On the other hand, the accumulation of polymer wastes in nature is one of the environmental concerns in today's world, which is mainly due to the widespread use of polymers in the packaging industry and disposable applications. In order to solve this problem, recycling is recommended as the most appropriate and economical solution. Because in addition to consuming polymer waste, it also saves energy and reduces carbon footprint.Polyethylene terephthalate (PET) is one of the polymeric materials which; It has a special place in the packaging industry and is widely used... 

    Characterization of Mechanical Properties of Polymer Nanocomposites with Spherical Inhomogeneities

    , M.Sc. Thesis Sharif University of Technology Goudarzi, Taha (Author) ; Naghdabadi, Reza (Supervisor) ; Bagheri, Reza (Supervisor)
    Abstract
    The improved properties of nanocomposites are not achievable with conventional composites. Scale effect is one the most important parameters in the physical and mechanical properties of polymeric nanocomposites. One of the physical phenomena, which can be related to the scale effect, is the very large interface between the nanoparticles and the polymeric matrices. Motional behavior and conformation of polymeric chains change near the nanoparticles surfaces. Due to high interface of the nanoparticles with the polymeric matrices the amount of these types of changes in the polymeric chains are so large that can change the physical and mechanical properties of polymeric nanocomposites. In this... 

    On small uniquely vertex-colourable graphs and Xu's conjecture [electronic resource]

    , Article Discrete Mathematics ; Volume 223, Issues 1–3, 28 August 2000, Pages 93–108 Daneshgar, A. (Amir) ; Naserasr, Reza ; Sharif University of Technology
    Abstract
    Consider the parameter Λ(G) = |E(G)| - |V(G)|(k - 1) + (k2) for a k-chromatic graph G, on the set of vertices V(G) and with the set of edges E(G). It is known that Λ(G)≥0 for any k-chromatic uniquely vertex-colourable graph G (k-UCG), and, S.J. Xu has conjectured that for any k-UCG, G, Λ(G) = 0 implies that cl(G) = k; in which cl(G) is the clique number of G. In this paper, first, we introduce the concept of the core of a k-UCG as an induced subgraph without any colour-class of size one, and without any vertex of degree k - 1. Considering (k, n)-cores as k-UCGs on n vertices, we show that edge-minimal (k, 2k)-cores do not exist when k ≥ 3, which shows that for any edge-minimal k-UCG on 2k... 

    Molecular Dynamics Simulation of Nano-Diamond Synthesis by Shock Wave

    , Ph.D. Dissertation Sharif University of Technology Mahnama, Maryam (Author) ; Naghdabadi, Reza (Supervisor) ; Movahhedy, Mohammad Reza (Co-Advisor)
    Abstract
    In the field of high-pressure material science, diverse carbon systems under pressure have been intensively studied with interest in synthesizing new phases. A variety of these synthetic phases which have met various applications in today technology are called the amorphous diamond. The pressure-induced structural transition of carbonaceous material to amorphous diamond is realized by shock compression and rapid quenching. The shock compression and rapid quenching generate the high pressure (several GPa) and the temperature (several hundred K) in a fraction of a microsecond.Since the mechanical and electrical properties of the synthetic diamond are severely sensitive to the atomic structure,... 

    An Experimental Study of the Effects of Sweep Wing on the Boundary Layer of 2D Wing

    , M.Sc. Thesis Sharif University of Technology Tabrizian, Arshia (Author) ; Soltani, Mohammad Reza (Supervisor) ; Davari, Ali Reza (Co-Advisor)
    Abstract
    The behavior of boundary layer under the effect of the sweep angle is considered. The measurements were performed by a pitot tube rake. Three models with various sweep angels at angles of attack -2, 0 and 2 degree were tested. Both tip and root of all wings were closed by flat plates in order to prevent the flow to roll-up. However the flow field on the wing was still three-dimensional because of the sweep angle. The velocity on the wing has two components; longitudinal and lateral. The cross flow emerges due to the non-equilibrium of pressure and centrifugal forces. The velocity profiles showed that the magnitude of cross flow was stronger near the leading edge of the wing. The cross flow... 

    Synthesis of Antibiotic-eluting Chitosan-based Composite Coating by Electrophoretic Deposition for Bone Implants

    , M.Sc. Thesis Sharif University of Technology Bakhshi, Zahra (Author) ; Simchi, Abdol Reza (Supervisor) ; Bagheri, Reza (Supervisor)
    Abstract
    Drug-eluting bone implant coatings is a new era that has gained a lot of attention in recent years. In this matter, drug is loaded in the coating and local and targeted release of the drug results in preventing the side effects of implantation and increasing the healing process of the patient. The aim of this project was to synthesis the antibiotic eluting chitosan-based composite using electrophoretic deposition for bone implant coating. By using electrophoretic deposition chitosan and chitosan-bioglass composite coatings were synthesized. Then the probability of loading of drug into coating by using electrophoretic deposition was evaluated and by using this process chitosan and... 

    Solving High-Dimensional Differential Equations Using Machine Learning

    , M.Sc. Thesis Sharif University of Technology Saffarieh, Pooya (Author) ; Razvan, Mohammad Reza (Supervisor) ; Moghadasi, Reza (Co-Supervisor)
    Abstract
    The numerical solution of differential equations in high dimensions has always been a challenge and has been associated with various computational difficulties. These equations appear naturally in a variety of problems such as financial mathematics, control, and physics, and their optimal solution with high accuracy and speed can open new windows on new applications. Conventional methods such as Finite element and finite difference method in high dimensions lose their efficiency, which is a barrier to fast and accurate calculation of these equations. In this dissertation first, we review some theoretical and practical aspects of deep neural networks and then we try to examine the recent... 

    Topological Defects in Confined Nematics by Planar Anchoring

    , M.Sc. Thesis Sharif University of Technology Seyed Nejad, Reza (Author) ; Ejtehadi, Mohammad Reza (Supervisor) ; Mozaffari, Mohammad Reza (Supervisor)
    Abstract
    Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

    Coarse Grained Molecular Dynamics Simulation of DNA Nanomechanics

    , Ph.D. Dissertation Sharif University of Technology Fathizadeh, Arman (Author) ; Ejtehadi, Mohammad Reza (Supervisor) ; Khoei, Amir Reza (Co-Advisor)
    Abstract
    DNA is the most important biological molecule which contains all the genetic information of living organisms. The mechanical behavior of this molecule has a significant role on its functions. In this study, we introduce a model to for DNA nanomechanics. This model is called rigid base-pair chain in which every base pair is considered as a rigid object. The base-pairs only interact with their nearest neighbors via a harmonic potential. We have used this model to study the nanomechanical behavior of the DNA such as its bending, twisting, and stretching elasticity. Also the model was successful to predict the structure of DNA minicircles with extra amount of twist. After that we used the model... 

    In Situ Synthesis of Nanorod Hydroxyapatite Reinforced Polycaprolactone Nanocomposite for Bone Tissue Engineering Application

    , M.Sc. Thesis Sharif University of Technology Moeini, Saeed (Author) ; Mohammadi, Mohammad Reza (Supervisor) ; Simchi, Abdol Reza (Supervisor)
    Abstract
    Hydroxyapatite is the most substantial inorganic constituent of bone tissue which displays splendid biocompability and bioactivity. Nevertheless, its mechanical properties is not utmost appropriate for a bone substitutes. Therefore, it is used to improve the mechanical properties of polymer matrix composite scaffolds. In the present work polycaprolactone as a polymeric matrix was employed to fabricate hydroxyapatite-polycaprolactone biocomposite scaffolds via in situ route. Solvothermal method was employed to synthesize in situ hydroxyapatite in polymer matrix. Porous scaffolds were fabricated via freeze-drying/porogen leaching. Physical, mechanical (compressive module and compressive...