Sharif Digital Repository

Recent experimental studies have demonstrated that the lowering of brine could alter the wettability of the oil-brine-rock systems from an oil-wetting state toward a more water-wetting state. This so-called “Low-salinity effect” (LSE) is one of the main effects of the enhanced oil recovery technology based on low-salinity waterflooding. “Double layer expansion” (DLE) in the thin brine film is proposed as the principal mechanism of this phenomenon. Nonetheless, the role of the electrical behavior of the oil/brine and rock/brine interfaces on the kinetics and dynamics of this process is not well understood. Moreover, since most of the previous works have either dealt with a thin film at... 

PD detection can be done using on-line or off-line methods. Online PD detection methods have several advantages; such as: increasing system reliability, outage time reduction and higher safety. This method doesn’t need any special high voltage source. When on line monitoring is carried out for PD measurement, the noises in the environment and the electromagnetic interference (EMI) make it difficult to detect the PD signal. Therefore de-noising should be employed to filter out the interferences involved in the detected signal. In this thesis wavelet transform is introduced for this purpose. In this method, the background noise in the site of measurement is recorded as a reference noise to be... 

The objective of this project is to study the behaviour and performance of an innotative floating offshore platform. Such Platform not only can be used for exploring oil from offshore fields, but for creating artificial islands, where land is in short supply. Due to its specific and, at the same time, simple geometry (symmetric), its fabrication does ont involve much complexity. Studies carried out on this platform include the investigation into its structural behaviour under gravitational (including self weight) and bouyancy forces. Studied cases include a number of platforms with different (geometrical) sizes and under 3 various bouyancy conditions (percentage), namely 1) 50% of the height... 

Fire is one the events which threatens the very existence of every building, residential, office, industrial or else. However, this threat is more serious with regard to buildings with steel structures. Steel, despite its many advantages over other structural materials, such as having high strength to weight ratio, ductility, toughness and resilience, has the disadvantage of rapidly losing its strength at elevated temperatures, i.e. in fire. Therefore, it is the responsibility of the designer to make the serious decision of whether to use steel, concrete, timber, or other materials for the structure of the building to be designed. Observations made during full-scale fire tests as well as... 

Due to unusual response of structures of buildings with irregularity in their architecture to dynamic excitations, to have a comprehensive knowledge of their behavior during earthquakes is of utmost importance. Building irregularities are in general divided into two major categories, namely Irregularity in Plane and Irregularity in Elevation, and one of the forms of the latter is where there is a split in the levels of the building. In this work, through a series of case studies, the effects of P- phenomenon on the behavior of steel split-level building structures were studied. 5, 10 and 15 story buildings with 5 and 6 bays, and level splitting of 30, 60, 90, 120 and 150 cm were studied. All... 

Mesoscopic hydrodynamic equations are solved employing a VOF based method to investigate the equilibrium shape of nanodroplets positioned over various topographic geometries of the supporting substrate for three-dimensional systems. By taking into account liquid-liquid and liquid-solid interactions a complex distribution for inter-molecular forces over the substrates (the disjoining pressure) is observed. In this research we show that motion of nanodroplets not only caused by contact angle difference in drplets two sides, but also depend on disjoining pressure parameters.Geometries with increasing complexities, from wedges to three dimensional edges and wedges, were explored with the main... 

Observations made after previous earthquakes have shown the crucial role of irregularities in initiating damage in buildings with irregularity, either in Plan or in Elevation. Since in existing Building Codes, there is no provision for the distribution of the Equivalent Static Loads for such buildings, designers have no option but to resort to Dynamic Analysis. In this work, the seismic behaviour of a group of two-dimensional steel building structures with irregularity in elevation, namely Split-Level buildings, was studied. The studied structures consist of a series of 5- and 15-storey frames having two parts with splitting distance of 150 cm. Both, moment-resisting and braced frames were... 

Base plates as the connecting components of steel structures to their foundations, have a crucial role in the behavior of these structures. In order to limit the thickness of base plates hence their cost within reasonable values, various types of attachments (stiffeners) are normally added to them. In this project 6 different configurations, Models, for the base plate and its attachments were considered and studied through finite element analysis. Each Model was studied under the combination of biaxial moments and a range of compressive loads including 0, 0.05 P/Py, 0.10 P/Py and 0.15 P/Py, where Py is the plastic load of the column. The moment-rotation curves of all models under various... 

Due to the important role of base plates, both in transferring forces from the structure to the foundation, and also in transferring vibrations from soil to the structure, it is necessary to have sufficient knowledge on their behaviour and performance under monotonic and cyclic loading regimes. In fact, the behaviour of the supports of any structure cannot be identified without identifying the behaviour of its base plates. Numerous configurations with/without various types of attachments have been proposed and used for base plates. In this work, altogether six commonly-used types of base plates were studied and their behaviour under monotonic and cyclic loadings was obtained using commercial... 

In recent years, the idea of Homogenous charge compression ignition (HCCI) engines has been in the center of attention as a new generation of internal combustion engines. Intense decrease in pollutant emission rate like NOx, low fuel consumption and high thermal efficiency are the main reasons of why these engines are in center of attention, however, some drawbacks, which the main one combustion control which happens in limited operation range between knock and misfiring has limited the use of these engines. Hence approaches like adding synthesis gas, using exhaust gas recirculation, controling effective comperession ratio by using variable valve timing, changing the input conditions... 

Reducing air pollutant emissions from vehicles is a difficult and time consuming procedure which needs utilizing of modern emission control equipment and setting strict regulations for car factories and drivers as well. How efficient these policies are and proposing operative solutions for air quality improvement depend on developing a sustainable model which is used in vehicle emission predictions and their share in total emissions. Emission factors are not constant values as they can be affected by various operational and ambient parameters. Development of Emission inventories calls for a huge number of measurements using different vehicles in diverse conditions. Thus, recognition of...