Sharif Digital Repository

Modification of orthopedic implant surfaces through advanced nanoscale coating methods has made a major breakthrough in maximizing implantation success. Adjustable drug release and biocompatibility are among the most momentous features since they can significantly prevent the implantation failure. In this study, the potential of silk fibroin (SF) nanofibers fabricated via electrospinning, along with titanium oxide nanotube arrays (TNTs) formed through anodization, were exploited to produce a cyto-biocompatible, well-controlled drug delivery system. Highly-ordered TNTs were formed in an organic electrolyte solution within 2 h at the voltage of 60 V under temperature controlling (16 °C).... 

Converting gray-scale images to colorful ones is one of the challenging tasks in the Computer Vision area, and various approaches based on neural network architectures have been proposed to generate colorful images. However, most of the suggested colorization frameworks use a single model for colorization regardless of the diversity of colors in images of various datasets. We claim that since such a structure is responsible for generating all types of images, it results in producing either faint-colored images or some artifacts in the images. We addressed this issue by proposing parallel colorization models, each of which is customized for generating images with similar contexts or color... 

Biodegradable polymer/bioceramic nanocomposites are osteoconductive and can accelerate healing of bone tissue. In this research, silk fibroin (SF)/titanium dioxide (TiO2) nanocomposites were synthesized using different concentrations of TiO2 nanoparticles (0, 5, 10, 15 and 20 wt%). The SF/TiO2 nanocomposites were studied in terms of bioactivity and biocompatibility. The in vitro assessment of osteoblasts compatibility indicated that SF inclusion rendered nanocomposite biocompatible whereas presence of TiO2 nanoparticles allowed the cells to adhere and grow on nanocomposite surface and enhanced the bioactivity of the composite. © 2017, Taiwanese Society of Biomedical Engineering  

A robust target recognition method proposed based on recurrence plot and recurrence quantification analysis (RQA) to generate robust features against noise, target velocity and aspect angle from micro-Doppler (m-D) signatures. The proposed method is tested on simulated data of three different targets using multiclass support vector machine (MSVM) and classification rate of about 95 % is achieved. Also, effect of noise and coherent processing time (CPT) on classification rate is investigated  

Natural silk fibroin (SF) polymer has biomedical and mechanical properties as a biomaterial for bone tissue engineering scaffolds. Freeze-dried porous nanocomposite scaffolds were prepared from silk fibroin and titanium dioxide (TiO2) nanoparticles as a bioactive reinforcing agent by a phase separation method. In order to fabricate SF/TiO2 scaffolds, 5, 10, 15 and 20 wt% of the TiO2 were added to the SF. The phase structure, functional groups and morphology of the scaffolds were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy techniques, respectively. Porosity of the scaffolds was measured by Archimedes' Principle. In addition,... 

It is known that Fluoride ions strongly affect bone mineralization and formation. In the present study, the engineered bone tissue scaffolds are fabricated using silk fibroin (SF) and flouridated TiO2 nanoparticles. TiO2 nanoparticles are modified by fluoride ions, and different levels (0, 5, 10, 15 and 20 wt%) of the fluoridated TiO2 nanoparticles (TiO2-F) were subsequently added to the SF matrix through phase separation method to prepare silk fibroin/flouridated TiO2 nanocomposite scaffolds (SF/TiO2-F). Phase structure, functional groups, morphology and mechanical properties of the obtained scaffolds were evaluated by X-ray diffraction method (XRD), Fourier transform infrared spectroscopy... 

Biocompatible and biodegradable three-dimensional scaffolds are commonly porous which serve to provide suitable microenvironments for mechanical supporting and optimal cell growth. Silk fibroin (SF) is a natural and biomedical polymer with appropriate and improvable mechanical properties. Making a composite with a bioceramicas reinforcement is a general strategy to prepare a scaffold for hard tissue engineering applications. In the present study, SF was separately combined with titanium dioxide (TiO2) and fluoridated titanium dioxide nanoparticles (TiO2-F) as bioceramic reinforcements for bone tissue engineering purposes. At the first step, SF was extracted from Bombyx mori cocoons. Then,... 

Introduction: This report describes the synthesis of 2-Amino-2-deoxy(S- benzoylthioacetyl)-D-glucose (S-Bz-TA-DG), radiolabeled with [ 99mTc(CO)3(OH2)3]+ complex with a procedure including deprotection of the benzoyl group, characterization by HPLC using a C18 reverse phase column and preliminary biodistribution study in normal mice. Methods: [99mTc(CO) 3(H2O)3]+ complex was used to label TA-DG with 99mTc. This complex was prepared using up to 46 mCi of Na99mTcO4 in 1mL saline. The radiochemical purity (>95%) was determined by TLC in normal saline solution as the mobile phase. Radio-HPLC analysis of [99mTc]-(TA-DG) at pH=9.5-10, revealed that labeling with 99mTc resulted in the formation of... 

The colorization of gray-scale images has always been a challenging task in computer vision. Recently, novel approaches have been introduced for unsupervised image translation between two domains using Generative Adversarial Networks (GANs). Since one can consider the gray-scale and colorful images as two separate domains, we propose a two-stage cycle-consistent network architecture to produce convincible images. First, an intermediate image is generated with a relatively uncomplicated objective function at the output. Next, at the second stage, the intermediate image is enhanced via a residual network structure with a more complicated objective function. Furthermore, by employing two... 

Nanoscaled quantum dots (QDs), with unique optical properties have been used for the development of theranostics. Here, InP/ZnS QDs were synthesised and functionalised with folate (QD-FA), D-glucosamine (QD-GA) or both (QD-FA-GA). The bi-functionalised QDs were further conjugated with doxorubicin (QD-FA-GA-DOX). Optimum Indium to fatty acid (In:MA) ratio was 1:3.5. Transmission electron microscopy (TEM) micrographs revealed spherical morphology for the QDs (11 nm). Energy-dispersive spectroscopy (EDS) spectrum confirmed the chemical composition of the QDs. MTT analysis in the OVCAR-3 cells treated with bare QDs, QD-FA, QD-GA, QD-FA-GA and QD-FA-GA-DOX (0.2 mg/mL of QDs) after 24 h indicated... 

Over the past few years, visual prostheses (namely, Argus II retinal implant) and gene therapy have obtained FDA approval in treating blindness resulting from retinitis pigmentosa. Compared to gene therapy; Argus II is less costly with a demonstrated favorable outcome, though the vision is yet artificial. To obtain better results, expectation counseling and preoperative retinal assessment are critical. The global experience with Argus II has enrolled no more than 300 cases so far. The first Argus II retinal prosthesis in Iran was successfully implanted in Shiraz (October 2017). To date, Argus II artificial retina is implanted in four patients in Iran. Beside successful surgery and... 

For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and... 

Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2... 

Due to the important role of commitment and trust in the relationship marketing, the factors which can directly result in a committed relationship along with the factors which can influence the commitment through influencing trust, according to the model of commitment and trust by (Morgan & Hunt, 1994) have been introduced and their level of importance has been investigated here. The article uses fuzzy cognitive maps (FCMs) in the proposed model to find the most important paths leading to relationship commitment. The FCM analyzes the responses of a group of 30 people including general practitioners in dentistry, managers of dental departments in some of the public clinics and hospitals who... 

Conventionally, a film of TiO2 particles of 300 nm size is employed in Dye-sensitized solar cells (DSCs) as the back reflector film to enhance the light harvesting. Perfect reflectance of silver in visible and near infrared motivates to investigate its potential as the material for the light back reflector film in DSCs. In this study, light back reflector films consisting of 300 nm-sized silver particles, as well as vacuum evaporated silver flat film, were fabricated and compared to 300 nm-sized rutile-type TiO2 particulate reflector film to study their optical aspects. Conventional TiO2 rutile-type particulate film demonstrates slightly lower performance... 

Monolithic dye-sensitized solar cells are conventionally fabricated using carbon composite layer as the counter electrode. In the current research, the brittle carbon composite layer is replaced with a metal foil, aiming to decrease the device series resistance and using less catalyst material in counter electrode. This metallic structure has also an advantage of mechanical strength and decreases the fabrication complexity. The counter electrode is prepared by electrodepositing Cr film followed by electrodepositing Pt nanoparticles on a metal foil. As the porous spacer layer, different composite layers of SiO2, TiO2, and Al2O3 are investigated and the best results are obtained for TiO2... 

Microbial fuel cells (MFCs) have been a potential green energy source for a long time but one of the problems is that either the technology must be used on a large scale or special equipment have been necessary to keep the fuel cells running such as syringe pumps. Paper-based microbial fuel cells do not need to have a syringe pump to run and can run entirely by themselves when placed in contact with the fluids that are necessary for it to run. Paper-based microbial fuel cells are also more compact than traditional MFCs since the device doesn't need any external equipment to run. The goal of this paper is to develop a microbial fuel cell that does not require a syringe pump to function. This... 

This paper proposes a novel decentralized control approach for islanded direct-current (DC) microgrids (MGs) based on model predictive control (MPC) to regulate the distributed generation unit (DGU) output voltages, i.e. the voltages of the point of common coupling (PCC). A local controller is designed for each DGU, in the presence of uncertainties, disturbances, and unmodeled dynamics. First, a discrete-time state-space model of an MG is derived. Afterward, an MPC algorithm is designed to perform the PCC voltage control. The proposed MPC scheme ensures that the PCC voltages remain within an acceptable range. Several simulation studies have been conducted to illustrate the effectiveness of...