Loading...
Search for: kafizadeh-kashan--maryam
0.232 seconds

    Assessing the Capacity of the Renewables as the Industrial Driving Force Rather than the Energy Provider, Case Study: Feasibility Study of Wind Turbine Manufacturing in Iran

    , M.Sc. Thesis Sharif University of Technology Kafizadeh Kashan, Maryam (Author) ; Maleki, Abbas (Supervisor)
    Abstract
    Facing the two challenges of the recession and rising requirement to reduce carbon emissions have led countries around the world to look for ways to promote economic productivity and reduce greenhouse gas emissions. In the meantime, the appearance of renewable energies has the potential to grow and diversify the economy, in addition to providing an effective solution to meet the growing demand for energy. The impact of development of the renewables industry on the economy for each country and each type of renewables can be examined separately. The purpose of this study is to evaluate the development role of wind energy industry as the motive engine of industry and specifically answer two... 

    Cyclic performance of corrugated steel plate shear walls with beam-only-connected infill plates

    , Article Advances in Civil Engineering ; Volume 2021 , 2021 ; 16878086 (ISSN) Ghodratian Kashan, S. M ; Maleki, S ; Sharif University of Technology
    Hindawi Limited  2021
    Abstract
    Lately, Corrugated Steel Plate Shear Walls (CSPSWs) have gained significance and reputation for being effective lateral force-resisting systems. Corrugated plates are characterized by greater out-of-plane stiffness and buckling stability than flat plates, ensuring their enhanced hysteretic behavior. In ordinary Steel Plate Shear Walls (SPSWs), infill plates are fixed to beams and columns. But, detaching the infill plate from columns and connecting it to the beams only is assumed here as a method for reducing column demands. The current study explores the cyclic performance of CSPSWs with beam-only-connected infill plates. The design of a one-story single-bay specimen was done and its finite... 

    Experimental investigation of double corrugated steel plate shear walls

    , Article Journal of Constructional Steel Research ; Volume 190 , 2022 ; 0143974X (ISSN) Ghodratian Kashan, S. M ; Maleki, S ; Sharif University of Technology
    Elsevier Ltd  2022
    Abstract
    In this research, the cyclic performance of double corrugated steel plate shear walls (DCSPSWs) is investigated experimentally and confirmed numerically. Three half-scale one-story single-bay specimens with different infill plate designs were constructed and tested under lateral cyclic loads. The design parameters examined were the connection between the corrugated plates and the connection between the infill plate and the columns. The results showed that regardless of the infill plate design, the DCSPSWs had a spindle-shaped hysteresis curve with good cyclic performance. However, the beam-only-connected DCSPSW exhibited slightly lower lateral load resistance. Finite element (FE) models of... 

    End diaphragm and interior cross frame modeling in steel tub girder superstructures

    , Article Structures ; Volume 55 , 2023 , Pages 147-159 ; 23520124 (ISSN) Dolati, A ; Ghodratian Kashan, M ; Maleki, S ; Sharif University of Technology
    Elsevier Ltd  2023
    Abstract
    Composite steel tub girders are proven to be an economical choice for long span bridges. However, detailed analysis of such superstructures requires extensive Finite Element (FE) modeling that includes many internal and external diaphragms. This paper is an attempt to study diaphragms and interior cross frames in tub girders and present simplified FE modeling details for the tub girder superstructures under gravity and seismic loadings incorporating accurate end diaphragm and interior cross frame stiffness equations. The simplified model is applicable to design of new tub girder bridges as well as load rating, health monitoring and retrofitting of existing bridges which require more... 

    Numerical and Experimental Investigation of Double Corrugated Steel Plate Shear Walls

    , Ph.D. Dissertation Sharif University of Technology Ghodratian Kashan, Mohyeddin (Author) ; Maleki, Shervin (Supervisor)
    Abstract
    Recently, corrugated steel plate shear walls (CSPSWs) have been shown to be an efficient lateral force resisting system for building structures. Corrugated plates have higher out-of-plane stiffness and improved buckling stability in comparison with flat plates which result in improved hysteretic behavior. The application of CSPSWs in tall buildings requires a wide range of thicknesses for the infill plates. Yet, the available range of thicknesses of corrugated plates is limited because of the restrictions associated with the process of cold forming. One solution to this problem is to use two corrugated plates as an infill plate. In this research, the cyclic performance of double corrugated... 

    3d Design of a Microfluidic Chip for Anticancer Drugs Screening

    , M.Sc. Thesis Sharif University of Technology Hashemi, Maryam Sadat (Author) ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the... 

    An efficient solution method for an agri-fresh food supply chain: hybridization of Lagrangian relaxation and genetic algorithm

    , Article Environmental Science and Pollution Research ; 2021 ; 09441344 (ISSN) Nasr, N ; Akhavan Niaki, S. T ; Hussenzadek Kashan, A ; Seifbarghy, M ; Sharif University of Technology
    Springer Science and Business Media Deutschland GmbH  2021
    Abstract
    In the traditional agri-fresh food supply chain (AFSC), geographically dispersed small farmers transport their products individually to the market for sale. This leads to a higher transportation cost, which is the primary cause of farmers’ low profitability. This paper formulates a traditional product movement problem in AFSC. First, the aggregate product movement model is combined with the vehicle routing model to redesign an existing AFSC (the ETKA Company; the most extensive domestic agri-fresh food supply chain in Iran) based on the available data. For the four-echelon, multi-period supply chain under investigation, a mixed integer linear programming (MILP) model is developed for the... 

    Correction to: An efficient solution method for an agri-fresh food supply chain: hybridization of Lagrangian relaxation and genetic algorithm (Environmental Science and Pollution Research, (2021), 10.1007/s11356-021-13718-8)

    , Article Environmental Science and Pollution Research ; 2021 ; 09441344 (ISSN) Nasr, N ; Akhavan Niaki, S. T ; Kashan, A. H ; Seifbarghy, M ; Sharif University of Technology
    Springer Science and Business Media Deutschland GmbH  2021
    Abstract
    The correct name of the 3rd Author is presented in this paper. © 2021, Springer-Verlag GmbH Germany, part of Springer Nature  

    Model Checking of Stochastic Activity Networks

    , M.Sc. Thesis Sharif University of Technology Maryam Bagheri (Author) ; Movaghar, Ali (Supervisor)
    Abstract
    Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the... 

    Robust Estimation and Control of a Planet Lander

    , M.Sc. Thesis Sharif University of Technology Ahmadvand, Reza (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of... 

    Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm

    , M.Sc. Thesis Sharif University of Technology Asgari, Houman (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and... 

    Design of Microfluidic Chip for 3D Cell Culture

    , M.Sc. Thesis Sharif University of Technology Ghobadi, Faezeh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this... 

    Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment

    , M.Sc. Thesis Sharif University of Technology Moosavi, Farzan (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s... 

    Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model

    , M.Sc. Thesis Sharif University of Technology Heidari, Faranak (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,... 

    Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft

    , M.Sc. Thesis Sharif University of Technology Baradaran, Behdad (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this... 

    Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach

    , M.Sc. Thesis Sharif University of Technology Moushaee, Pegah (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops... 

    Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter

    , M.Sc. Thesis Sharif University of Technology Khalighi, Sadaf (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac... 

    Optimal Control of Unknown Interconnected Systems via Distributed Learning

    , M.Sc. Thesis Sharif University of Technology Farjadnasab, Milad (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement... 

    Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning

    , M.Sc. Thesis Sharif University of Technology Delshad, Aria (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key... 

    Application of Machine Learning Algorithms in Analysis and Prediction of Football Goalkeepers Performance and their Valuation in the Transfer Market

    , M.Sc. Thesis Sharif University of Technology Zabihi, Matin (Author) ; Radman, Maryam (Supervisor)
    Abstract
    Football transformation into an industry with extraordinary financial flow has made this popular sport an attractive field for sports analysts. The development of the computer science and data science has led to the emergence of a concept called football match analysis. The goalkeepers, as a unique member of football teams and regrading their unique features and characteristics, play a crucial role in the outcome of competitions and the success of the teams. Therefore, analysis of various aspects of their performance is one of the essential issues in the application of data science in football. In this research, three separate parts have been studied. In the first part, by using pre-match...