Sharif Digital Repository

High peak to average power ratio (PAPR) is one major drawback of OFDM system which highly affects the performance if untreated. Several methods have been proposed to overcome this problem. In all these methods reduction in PAPR is gained through a tradeoff with another system figure such as mean transmit power, bandwidth or BER. In this thesis we investigate high PAPR problem in OFDM, and we will introduce some methods proposed to alleviate it. These methods are divided into two classes; methods in the first class are based on finding a peak cancelling signal and methods in second class rely on solving a discrete optimization problem. We give a general formulaion for the methods in second... 

The purpose of this project is the synthesis and characterization of a group of phenolic amino acidic derivatives that are studied in both solid phases as well as their solutions. For this, new phenol derivatives of serin and isoleucine amino acids were synthesized and characterized by 1H NMR , 13C NMR, IR spectroscopy as well as elemental analysis. These ligands were utilized to prepare LSF perovskite membrane. According to their XRD patterns, it was concluded that the powdered precursor prepared by serin derivative has shown better qualification and less intermediate phase in the synthesized perovskite membrane similar to the sample prepared by applying EDTA. Furthermore, in the previous... 

Derivation and lexicalization are two critical subjects in morphology and word-formation processes. Although wide studies have been taken place about derivation, which is one of the most productive processes of word-formation along with composition, there has been no proper attention to lexicalization, which sometimes happens after derivation. One of the applications of this thesis is developing dictionaries. With regard to this issue that there is no scientific and complete method for recording lexical units in Persian dictionaries, we decided to propose a scientific method to do the mentioned activity by studying derivational processes, affixes and lexicalization phenomena and its relation... 

Brines are one of the main resources for lithium extraction and Iran has got many high magnesium and low lithium brine resources. In order to extract lithium, it is required to carefully identify these resources and their associated compounds and then an appropriate method can be adopted to extract lithium. Among the Previous researches, Bahadori, Jandaghi and Moazeni developed methods for removal of undesirable brines elements, Deposition of lithium from refined brine and lithium adsorption anatase ion-sieves membrane respectively; in this study it has been tried to investigate the optimization of the adsorption process, onto the TiO2-B ion sieve with nanotube morphology. TiO2-B nanotubes... 

The aim of this thesis is experimentally and numerically investigation of annular flow between the inner rotating smooth surface and the outer stationary grooved surface with or without axial fluid flow. Mounting grooves on the surfaces is important in cooling of rotating machineries such as electric generators and rotating heat pipes. The effect of different parameters such as the air gap between the surfaces, the geometry of the grooves, axial flow and rotation speed are numerically and experimentally investigated. The experimental results with axial grooves show that the entrance length decreases up to 17% with increasing the grooves depth. The reason is enhancement of the mixing and the... 

Since the classical continuum theory fails to deal with the problems associated with defects, stress concentrators, and relevant deformation phenomena in solids, alternative approaches that can detect the atomistic nature of materials' fracture are required. The deficiency of the capture the size effect which yields delusively high values for some components of the stress field right on the edge of the stress concentrators, and its weakness in describing the complex interaction between small inhomogeneities, cracks and the like when they are only a few nanometers apart, are among some of the disadvantages of the classical approach. In recent years, however, atomistic methods are emerging to... 

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Shot peening is a cold-working process commonly used in industry to improve the fatigue performance, stress corrosion resistance and surface nano-crystallization of metallic parts. This process extends fatigue life via two mechanisms: Preventing the crack growth due to compressive residual stresses and, preventing the crack initiation because of increased material hardness. These mechanisms are the results of the bombardment of the component's surface with small spherical particles. In this research, an analytical model is developed for estimating the residual stress distribution induced by shot peening process. The modifications of the developed analytical model are related to... 

Solid-State Drives (SSDs) provide high performance, low power consumption, and hence are widely used in the I/O cache of enterprise storage systems and high performance servers. Although employing high performance SSDs in the I/O cache of storage systems significantly improves system performance, it comes with significant reliability threats for write operations upon power failures. In order to provide high level of reliability, storage architectures employ SSDs in I/O cache with RAID-1 configuration, however, such configuration only partially mitigates the reliability issues of the SSDs. In this thesis, we analyze the reliability of SSD-based I/O caches against power outage and high... 

Language model is one of the most important parsts of an automated speech recognition system whiche incorporates the knowledge of Natural Language to the system to improve its accuracy. Conventionally used language model in recognition systems is ngram which usually is extracted from a large corpus using related frequency method. ngram model approximates the probability of a word sequence by multiplying its ngram probabilities and thus does not take into account the long distance dependencies. So, syntactic language models could be of interest. In this research after probing different syntactic language models, a mehtod for re-estimating ngram model, introduced by Stolcke in 1994, was... 

A method of joining dissimilar metals in the semi solid state is presented. By this method bonding of Stainless steel and semisolid aluminum alloy took place in this research. By usage of thermomechanical treatment, dendritic microstructure of cast aluminum alloy changed to globular structure. The experimental process of bonding occurred at semisolid temperature stage of aluminum alloy in a predesigned mold by using a pressure equipment. The relationship between interfacial shear strength and solid fraction of aluminum alloy, bonding pressure and time of keeping pressure were studied by method of orthogonal experiment. By the usage of Taguchi method in designing experiments, plurality of...