Sharif Digital Repository

Background: The bio-oxidation of ferrous iron is a potential industrial process in the regeneration of ferric iron and the removal of H2S in combustible gases. Bio-oxidation of ferrous iron may be an alternative method of producing ferric sulfate, which is a reagent used for removal of H2S from biogas, tail gas and in the pulp and paper industry. For practical use of this process, this study evaluated the optimal pH and initial ferric concentration. pH control looks like a key factor as it acts both on growth rate and on solubility ofmaterials in the system. Results: Process variables such as pH and amount of initial ferrous ions on oxidation by A. ferrooxidans and the effects of process... 

The oxidation of ferrous iron (Fe2+) in solution using Acidithiobacillus ferrooxidans has industrial applications exclusively in the regeneration of ferric iron (Fe3+) as an oxidizing agent for the removal of hydrogen sulfide from waste gases, desulfurization of coal, leaching of non-ferrous metallic sulfides and treatment of acid mine drainage. The aim of this investigation was to increase the bio-oxidation rate of ferrous sulfate by using immobilized cells. Rate of Fe2+ oxidation was determined in a packed-bed bioreactor configuration with monolithic particles being used as support material. Biooxidation of ferrous iron by immobilized cells was investigated in repeated batch culture and... 

Evaluation of spinal loads in patients with low back pain (LBP) is essential to prevent further lumbar disorders. Many studies have investigated the relationship between lifting task variables and lumbar spine loads during manual lifting activities. The nature of the external load (stable versus unstable loads) is an important variable that has received less attention. Therefore, the present study aimed to measure trunk kinematics and estimate compressive-shear loads on the lumbar spine under lifting a 120 N stable load and 120 ± 13.63 N sensual unstable load in 16 healthy and 16 non-specific LBP individuals during lifting activities. The maximal lumbar loads were estimated using a... 

The aim of this research work is to investigate sorption characteristic of acid treated brown algae Sargassum bevanom (acid treated S. bevanom) for the removal of Cr(VI) ions from aqueous solutions. The acid-treated alga was prepared by transferring the S. bevanom into 0.5. M HCl and then stirring the mixture at 300. rpm for 6. h at room temperature. The sorption of Cr(VI) ions by batch method is carried out. The optimum conditions of biosorption were found to be: a biomass dose of 0.7. g in 100. ml of Cr(VI), contact time of 110. min and pH 3, respectively. In optimum condition, removal efficiency was 89.64%. It was found that temperature has a positive effect on the removal efficiency.... 

A study was performed to investigate how different trunk and knee positions while holding static loads affect the lumbar curvature and internal loads on the lumbar spine at L4-L5. Ten healthy male subjects participated in this study. Two inclinometers were used to evaluate the curvature of lumbar spine, lordosis, while a 3D static biomechanical model was used to predict the spinal compression and shear forces at L4-L 5. Eighteen static tasks while holding three level of load (0, 10 and 20 kg), two levels of knee position (45 and 180° of flexion) and three levels of trunk position (neutral, 15 and 30 degree of flexion) were simulated for 10 healthy male subjects. The results of this study... 

Multiple joint interactions are critical to produce stable coordinated movements and can be influenced by low back pain and task conditions. Inter-segmental coordination pattern and variability were assessed in subjects with and without chronic nonspecific low back pain (CNSLBP). Kinematic data were collected from 22 CNSLBP and 22 healthy volunteers during repeated trunk flexion-extension in various conditions of symmetry, velocity, and loading; each at two levels. Sagittal plane angular data were time normalized and used to calculate continuous relative phase for each data point. Mean absolute relative phase (MARP) and deviation phase (DP) were derived to quantify lumbar-pelvis and... 

The dynamic characteristics of functionally graded (FG) metal foam cylindrical micro-scale shells in contact with a moving load will be analyzed thorough this paper accounting for strain-gradient size-dependency. In the material structure of a metal foam, pores can diffuse uniformly or non-uniformly. Based upon Laplace transform, the dynamical governing equations of the first-order micro-shell model can be established in a new domain. In order to go back into the time domain, an inverse Laplace transform will be required. Thus, on can express the time response or dynamic deflection of the micro-shell under moving load. In the presented results, it is easy to see the prominence of... 

Objective: This study aimed to employ nonlinear dynamic approaches to assess trunk dynamic stability with speed, symmetry, and load during repetitive flexion-extension (FE) movements for individuals with and without nonspecific low back pain (NSLBP). Background: Repetitive trunk FE movement is a typical work-related LBP risk factor contingent on speed, symmetry, and load. Improper settings/adjustments of these control parameters could undermine the dynamic stability of the trunk, hence leading to low back injuries. The underlying stability mechanisms and associated control impairments during such dynamic movements remain elusive. Method: Thirty-eight male volunteers (19 healthy, 19 NSLBP)... 

Objective: This study aimed to employ nonlinear dynamic approaches to assess trunk dynamic stability with speed, symmetry, and load during repetitive flexion-extension (FE) movements for individuals with and without nonspecific low back pain (NSLBP). Background: Repetitive trunk FE movement is a typical work-related LBP risk factor contingent on speed, symmetry, and load. Improper settings/adjustments of these control parameters could undermine the dynamic stability of the trunk, hence leading to low back injuries. The underlying stability mechanisms and associated control impairments during such dynamic movements remain elusive. Method: Thirty-eight male volunteers (19 healthy, 19 NSLBP)... 

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response, as well as the forced response under the excitation of the grip, are expressed parametrically. Experiments are performed on a particular flexible bar (FLEXI-BAR) in order to obtain numerical values for quantifying the model's parameters. The model is also computationally simulated to study the response of the flexible bar to various excitations. The results are imported into a multi-segment musculoskeletal software (AnyBody), where the effect... 

IMPORTANCE The Global Burden of Diseases, Injuries, and Risk Factors Study 2019 (GBD 2019) provided systematic estimates of incidence, morbidity, and mortality to inform local and international efforts toward reducing cancer burden. OBJECTIVE To estimate cancer burden and trends globally for 204 countries and territories and by Sociodemographic Index (SDI) quintiles from 2010 to 2019. EVIDENCE REVIEW The GBD 2019 estimation methods were used to describe cancer incidence, mortality, years lived with disability, years of life lost, and disability-adjusted life years (DALYs) in 2019 and over the past decade. Estimates are also provided by quintiles of the SDI, a composite measure of educational...