Sharif Digital Repository

In this paper, a two-dimensional, two-phase, non-isothermal model is presented to predict the electrochemical, mass transfer and heat transfer behaviors in a direct methanol fuel cell (DMFC). Governing equations including the momentum, continuity, heat transfer, proton and electron transport, species transport for water, methanol, and all the gas species (carbon dioxide, methanol vapor, water vapor, oxygen, and nitrogen) and the auxiliary equations are coupled to studying the various phenomena in DMFC. The modeling results agree well with the four different experimental data in an extensive range of operation conditions. A parametric study is also performed to examine the effects of the cell... 

In this paper, a two-dimensional, two-phase, isothermal model is presented to investigate the water transport characteristic and water distribution in a direct methanol fuel cell (DMFC) with emphasis on exploring the water distribution in different layers of DMFC. The liquid-gas two-phase mass transport in the porous anode and cathode is formulated based on multi-fluid model in porous media and water and methanol crossover through the membrane are considered with the effect of diffusion, electro-osmotic drag, and convection. The modeling results agree well with the three different experimental data in an extensive range of operation conditions. A parametric study is also performed to examine... 

Nonlinearity characteristics, such as backlash, in various mechanisms, limit the performance of feedback systems by causing delays, undesired oscillations and inaccuracy. Backlash influence analysis and modeling is necessary to design a precision controller for this nonlinearity. Backlash between meshing gears in an electromechanical system is modeled by the use of differential equations and a nonlinear spring-damper. According to this model, the paper shows that oscillations and delays cannot be compensated by a state feedback controller. Therefore, an adaptive algorithm is designed, based on different regions of the system angular position error. Since this controller needs an estimation... 

Nonporous and mesoporous silica-coated magnetite cluster nanocomposites particles were fabricated with various silica structures in order to develop a desired carrier for the lipase immobilization and subsequent biodiesel production. Lipase from Pseudomonas cepacia was covalently bound to the amino-functionalized particles using glutaraldehyde as a coupling agent. The hybrid systems that were obtained exhibited high stability and easy recovery regardless of the silica structure, following the application of an external magnetic field. The immobilized lipases were then used as the recoverable biocatalyst in a transesterification reaction to convert the soybean oil to biodiesel with methanol.... 

We developed a modified straightforward method for the fabrication of uniformly sized silica-coated magnetite clusters core/shell type nanocomposite particles. Proposed simple one-step processing method permits quick production of materials in high yield. The structural, surface, and magnetic characteristics of the nanocomposite particles were investigated by transmission electron microscopy (TEM), scanning electron microscope (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared (FTIR). The sphere-shaped particles almost have the average diameter of 120 nm, with a magnetic cluster core of 80 ± 15 nm, and a silica shell of 25 ± 10 nm... 

In this article a new scheme is proposed to use mean supervector in text-prompted speaker verification system. In this scheme, for each month name a subsystem is constructed and a final score based on passphrase is computed by the combination of the scores of these subsystems. Results from the telephony dataset of Persian month names show that the proposed method significantly reduces EER in comparison with the-State-of-the-art State-GMM-MAP method. Furthermore, it is shown that based on training set and testing set we can use 12 models per speaker instead of 220. Therefore, this scheme reduces EER and computational burden. In addition, the use of HMM instead of GMM as words' model improves... 

Design techniques to enhance bandwidth and linearity of broadband multistage low-noise amplifiers (LNAs) are presented. A feedback amplifier circuit is proposed to compensate for transistor gain roll-off with frequency in other amplifier stages and extend overall bandwidth. Moreover, a transistor width tapering in a multistage LNA is applied to improve linearity. These techniques are adopted in a three-stage monolithic microwave integrated circuit (MMIC) LNA implemented in a 0.1-μm GaAs pHEMT process. The LNA features 18-43 GHz bandwidth, 21.6 dB average gain, and 1.8-2.7 noise figure (NF). It exhibits output 1-dB compression point of 11.5 dBm at 30 GHz and consumes 70 mA bias current from a... 

Gravitational lensing of gamma-ray bursts (GRBs) can provide an opportunity to probe the massive compact objects in the universe at different redshifts. We have discovered two consecutive pulses in the light curve of GRB 090717034, with the same temporal profile and different count rate, separated by a time interval, which is identified as a gravitationally lensed candidate in the Fermi-GBM GRB catalog. Here, we use the χ 2 minimization method to investigate the similarity of the temporal profile variability of the two pulses as a gravitationally lensed GRB candidate. We find the magnification factor and the time delay between two pulses to minimize the χ 2 function. Then, we perform a Monte... 

Interfacial tension is one of the very important parameters in pharmacology science, chemical engineering and petroleum engineering. The interfacial tension between pure hydrocarbons and water is widely used in chemical and petroleum engineering and so that it is highly desirable to find its accurate values. In this study a new unique correlation has been developed based on a comprehensive database of pure hydrocarbons-water interfacial tension values which contained both aliphatic and aromatic compounds (32 different hydrocarbons) with pressure ranges of 0.1-300 MPa and temperature ranges of 252.44-550 K. The proposed correlation uses the density difference between pure hydrocarbon and... 

Uniformly sized superparamagnetic single-shell nonporous (S1) and double-shell mesoporous silica nanocomposite particles with ∼130 nm magnetite cluster cores are synthesised in this study. Mesoporous particles are prepared with two BJH pore sizes (2.44 and 3.76 nm, designated as S2 and S3 particles, respectively). Once the lipase was immobilised on particles, our results showed that the enzyme loading capacities of mesoporous structures, i.e. S2 and S3, are higher than that for nonporous particles (S1). Hydrolytic activity tests reveal that immobilised lipases retain about 90% of the free enzyme's activity. Furthermore, comparing to the free enzyme, the thermal stability of immobilised...