Sharif Digital Repository

Products on Research and Development (R&D) are followed by Technology development. Projects on R&D are cost intensive and considerable of financial resources should be allocated. Optimal allocation of resources could be managed through cost effective strategy. Hence, a “Model for planning and development of technology” has been developed in the present work, which lends itself to the analysis of the industrial application of planning of technological development based on minimizing costs of both development and application of a technology. Mixed Integer Programming optimization model has been developed which enables studying the structure of R&D activities. This model is based on the concept... 

As a problem, generally, energy security components do not interfere with the calculation of the optimal energy supply situation. In this paper, we are looking to find a solution to make a framework of the impact of energy security on energy supply in order to obtain comprehensive analysis of the economic optimal point. Method is based on the competition of energy costs to meet demand during the study period. Threats that have been addressed in the energy security are seen as risky and stochastic parameters in the model. The nature of these parameters is of uncertainty type, therefore, based on the probable scenarios of the stochastic model, the perspective of the energy supply system is... 

Nowadays, the world is full of multi criteria decision problems and all the people should make decisions in different situations. Sometimes, the result of a decision problem is so important as a wrong decision may result in a loss that cannot be compensated. Therefore a decision making tool seems as a must. On the other hand, in this era of rapid social and technological change leading to increasing life complexity, sensitivity analysis is an important issue in all decision making processes. Analytic Hierarchy Process and Analytic Network Process, as two common tools for multi criteria decision making, are widely used throughout the past decade in different fields. Designing the model and... 

In the recent years, there has been an increasing attention toward usage of ultrasonic for enhanced oil recovery practices. But, thorough knowledge of active mechanisms and spreading and characterization of developed fingers during this practice is not available. From the other hand, due to limited amount of light oil fields, more attentions towards recovery from heavy oils is the need of the hour. Documents show that the big issues during the enhanced oil recovery from heavy crudes are high density of reservoir oil as well as poor development of fingers during injection due to high mobility ratios. In this study, results of ultrasound effect on the heavy oil recovery and its effect on the... 

The aim of this thesis was to find the optimum retention time for treatment of synthetic petroleum wastewater by a wastewater treatment system made with a bucket, mineral material and earthworms residing in a vermibed. In order to make the desired flow happen, height difference was utilized. The polluting substance used for making wastewater was BTEX. As the wastewater was synthetic, the concentration was also a variable. The ultimate soluble concentration was 3200 mg/l and more concentrations were not tested. Parameters such as number of worms, worm’s growth rate and their distribution pattern, humidity amount and distribution and worm’s acclimatization time during organic loading shock... 

Productivity is the effective usage of input or resources for production or output. Input (including Energy, raw materials, capital and work force), which is being used for output (including final products or services performed by an organization). Productivity, increases gross domestic product and competitiveness, and improves level of living. Firms and related management levels play the main role in improving productivity. Using productivity cycle management brings the productivity to improve as a permanent process, specifies the rout for productivity and prepares the ground. The most important step in productivity cycle (PDCA) is the measurement of productivity. In this research several... 

In the present study, the factors that affect the IPO underpricing in the Tehran Stock Exchange are investigated. We define the variables of IPO percentage, age and size of companies, dummy variable for rounded IPO prices, market return in a month before the initial public offering, average return of IPOs that had been done during one month before the IPO of each ticker and the dummy variable for industrial group in which the company is located. We had to calculate the initial return of 246 companies that were offered in the years 1380 to 1395. In this study, due to the existence of a daily stock price volatility constraint, a new algorithm was introduced to calculate the dependent... 

Different parts of this research are focused on developing FO membranes and improving their performance. For this purpose, thin film composite (TFC) membranes with fixed composition of polyethersulfone/polyamide (PES/PA) have been used to investigate the effect of nanocomposites containing transition metal dichalcogenides (TMDs) on their performance. The support layer in all cases is PES, which is prepared through the phase inversion process and does not contain any nanofillers. The modification process takes place in the polyamide layer by dispersing the desired nanoparticles in the aqueous monomer solution necessary to form this active layer. Identification and characterization of... 

Considerable effort has been directed in recent years towards the transition metal complex catalyzed oxidation of organic compounds. Herein the synthsis of the iron complex of bis(oxazoline) ligand as a novel catalyst is reported, and the catalytic activity of this complex in oxidation of sulfides is investigated. Bis(2-oxazolynil)methane as ligand is prepared by condensation of diethylmalonate with 2-aminoethanole in 1:2 molar ratio and finally corresponding complex is synthesized by the reaction between FeCl3.6H2O and Bis(2-Oxazolynil)methane in 1:1 molar ratio. The complex is characterized by using IR, UV-Vis, cyclic voltametery, conductometery and elemental analysis data. Moreover,... 

In this project a wide-band inductorless Low Noise Amplifier (LNA) has been designed using 0.18 micrometer CMOS technology. The specification of this amplifier has been explored in frequency band of 330MHz to 10GHz. Wide-band input and output impedance matching, low Noise-Figure (NF), reasonable voltage gain and low power consumption are the main challenges of Low Noise Amplifier design. Without using an inductor a better overall performance of LNA in a wide frequency band as well as a lower chip area has been achieved. In this design a novel noise cancellation technique in common-gate topology has been used for lowering the Noise Figure of the LNA. Group Delay of the designed LNA, which is... 

The first part of this thesis describes the synthesis and characterization of several Mn, Fe and Mo complexes containing tridentate Schiff base and oxazoline ligands and their reactivities as catalysts in the oxidation of organic compounds like olefins and sulfides, as well. The crystal structures of newly prepared cis-dioxo-bis[2-(2′-hydroxyphenyl)-oxazolinato]molybdenum(VI), cis-[MoO2(phox)2] and (N-hydroxyphenyl-salicylidenamine)(acetylacetonato)ethanol iron(III), [FeIII(N-OPh-sal)(acac)EtOH] complexes have been described by X-ray crystallography. Due to the difficulties in the preparation of suitable single crystals of novel... 

In this project, issues related to designing and fabricating active phase shifter blocks on the silicon substrate have been examined. Phase shifter circuits are designed in a way that have the most bandwidth and the less sensitivity to process characteristics changes and environmental conditions. The purpose of this research, is designing an active 6 bits phase shifter. The active phase shifter synthesizes the required phase using a phase interpolation process by adding quadrature phased input signals. It uses a new quadrature all-pass filter for quadrature signaling with a wide bandwidth. Also substitute structure has been suggested to this filter which is the main block in determining... 

Integration of radio transceivers results in developing low power low cost wireless systems and allows delivery of multimedia contents to battery-powered mobile terminals. Portable reception of digital video for hand-held devices is one of the applications, for which, some telecommunications standards have been developed in the recent years. This research deals with the integrated implementation of the radio frequency parts of the digital video receiver, especially the frequency synthesizer. The key aspects of the digital video reception system are the required signal to noise ratio, which is relatively high, wide band input signals and strong interferers in the receiving band.
In... 

This thesis deals with the front-End of an Integrated RFID Reader operated in 860MHz to 960MHz, which integrates a RF transceiver including PA, LNA and Mixer. In the receiver part, a power amplifier was fabricated and measured and in the transmitter part, LNA and Mixer were designed. There is a growing interest in utilizing CMOS technologies for RF power amplifiers (PAs). Although several advances have been made recently to enable full integration of PAs in CMOS, it is still among the most difficult challenges in achieving a truly single-chip radio system in CMOS. This is exacerbated by supply voltage reduction due to CMOS technology scaling and on-chip passive losses due to the conductive... 

The selective oxidation of sulfides to sulfoxides is an important method in organic synthesis because sulfoxides are useful synthetic intermediates for the construction of various chemically and biologically significant molecules. To date, the most important method of preparation involves the oxidation of sulfides. Various oxidizing agents are used for this purpose. Oxovanadium(IV)(Salen) and oxovanadium(V)(Salen)Cl were synthesised and screened in the vanadium-catalysed oxidation of sulfides to solfuxides with urea hydrogen peroxide(UHP) as terminal oxidant. Both complexes showed good activity and selectivity trough the catalytic reaction.characterized by elemental analyses, IR, 1H and 13C... 

Fully integrated frequency synthesizer is one of the important system-on-chips building blocks. Among this circuit’s remarkable applications, Bioelectronics field is very common. In these applications, advanced microelectronic circuits are used in order to diagnosis and treatment of diseases. The aim of this thesis is design and implementation a wideband frequency synthesizer in a 0.18um CMOS technology. The main usage of this circuit is in a fully integrated implantable biomedical sensory chip. This circuit generates two necessary local signals in sensory chip to stimulus cells and process the information.
Frequency synthesizer is based on phased locked loop (PLL) circuit and produce...