Sharif Digital Repository

Deformation and breakup of drops are the basisof many interfacial flow studies and appear in a number of industrial applications, e.g., spray painting, spray combustion, emulsion, foam, sedimentation, and rain. Following their formation, drops may enter a region where hydrodynamicforces are large enough to cause their significant deformation and breakup. When a drop breaks apart into a multitude of small fragments due to disruptive hydrodynamicforces, the process is termed secondary atomization or breakup. Due to many engineering and scientific applications of multiphase and multi-component flows, they have been the main topic of many researchers for many years. Particularly, interfacial... 

Understanding the hydrodynamic and physical chemistry basis of surface phenomena is very important for many branches of basic science like Chemical Engineering, Mechanics, Space Engineering, and Material Engineering in the level of fundamental studies and applications. In addition to the common technologies, the role of surface phenomena in novel technologies is also very essential. For example, nanotechnology, chemical or physical sensors, or micro electrical systems in which surface phenomena is playing a main role. Therefore, understanding the basis of surface science is very important for any development in many industrial and fundamental studies. The main topic of this thesis which is a... 

Permeability is an essential parameter used for reservoir evaluation, simulation and management to optimize oil recovery. The conventional approach to estimate reservoir connectivity, conductivity, sweep efficiency and other critical information for decision-making is to build detailed geological models, which are then upscaled to a coarser grid where flow simulations are run. However, this takes many hours to be carried out even for a single realization practically. In practice, a very small number of realizations are considered and consequently the true uncertainty in the results is very poorly estimated. In this study, a statistical model of isotropic overlying sandbodies is used to... 

One of the major reasons causing cracks in external surfaces of concrete arch dams are thermal loads. Therofore, in order to avoid instabilities due to function of thermal loads in association with hydrostatic and hydrodynamic pressures, a precise evaluation of temperature distribution through dam body is indispensable. In this study, effects of thermal loads mostly on upstream surface of Karun-3 concrete arch dam in Iran were examined using a 3-D finite element method considering water level fluctuations. Also the influence of operatvie boundry conditions in our problem which are water temperature, air temperature and solar radiation was precisely taken into account. Moreover, nonlinear... 

Pile foundations suffered severe damages during the past earthquakes in all around the world. These damages were more severe in laterally spreading grounds and they mostly have been observed in gently sloping grounds and coastal areas. In these cases, Pile foundations not only are subjected to structures inertial loads and kinematic loads of liquefied soil but also lateral spreading intensifies damages. Thus, in the recent decade, several researches have been conducted to investigate the behavior of pile foundations in liquefiable and laterally spreading grounds, however, some uncertainties still remain in modeling of soil-pile interaction. In this study, the effects of liquefaction- induced... 

Loads from laterally spreading ground have been a major cause of damages to pile foundations in past earthquakes. Analysis of case histories have shown that damages are particularly intense when a nonliquefiable surface crust layer spreads laterally over underling liquefied layers. In this research the effect of lateral spreading due to liquefaction on single piles embede in a gently sloping ground has been investigated. Finite element method using OpenSees is used to model the pile and embedded soil. The soil profile for all models consisted of a nonliquefiable crust layer overlying loose sand with Dr = 30-35% overlying dense sand with Dr = 70-80%. The effect of geometric properties such as... 

Initial static shear stress caused by slopes or nearby structures' foundations can affect the behavior of the soil which is concerned many investigators during previous three decade. In this investigation, the effect of initial static shear stress on the liquefaction resistance of Babolsar sand has been probed using cyclic simple shear tests. Three different initial relative densities (Dr0=20%, 40% and 60%) and three different initial normal stresses (σv0= 50, 150 and 250 kPa) were considered in tests and four various initial static shear ratios (α) ranging between 0.0 and 0.3 were applied which leads to more than 190 distinct experiments. All tests were conducted under constant volume and... 

In this research, the effects of Rayleigh waves on the response of typical three-dimensional concrete faced rock-fill dams (CFRDs), considering dam-foundation interaction and spatial variability of earthquake ground motion are investigated. The time history of Loma Prieta earthquake (Gilroy 1 station) is used as input excitation. The dam is considered to be located in a prismatic canyon with trapezoidal cross-section. A substructuring method, in which the unbounded soil is modeled by the scaled boundary finite-element method (SBFEM), is used to obtain scattered motion and interaction forces along the canyon. Non-linear model is used for rock fill... 

In this project rotational barrier around the C-N bond in 4-ethyle-morpholine- carboxylate has been studied using DNMR spectroscopy. Spectra were taken at variable temperature, and then with simulation of bandshape broadening pattern at coalescence region, rate constants of exchange were obtained for all temperatures. For simulation of line-shape broadening Spinworks software was used, that with two interfaces made possible simulation with two bandshape simulator programs, DNMR and MEXICO. The rate constants obtained from simulations, were used for calculation of thermodynamic activation parameters (∆G#, ∆H#, ∆S# and Ea). ∆G# 298 value of 13.66 Kcal/mol for 4-ethyle-morpholine- carboxylate... 

Soil liquefaction is a phenomenon in which soil loses much of its strength or stiffness for a generally short time but nevertheless long enough for liquefaction to be the cause of many losses. Thus, many researchers have worked on the factors which affect this phenomenon. Effects of initial static shear stress on liquefaction strength of loose and medium dense Babolsar sand specimens were investigated in this study. Babolsar sand is fine to medium uniform sand classified as SP in USCS. Tests were performed with cyclic simple shear and static triaxial devices. All tests were performed under consolidated undrained conditions. Cyclic simple shear tests were performed under constant vertical... 

The Barrier of the internal rotation around C-N bond in O-ethyle morpholine-4-carbotioate were calculated using dynamic NMR spectroscopy (DNMR) in DMSO solvent. 1H and 13C NMR spectra were recorded at different temperatures (295-350K). Band shape broadening patterns at coalescence regions were simulated to extract rate constants of NMR spectera. Transition state thermodynamic properties of internal rotation around C-N bond in O- ethyle morpholine -4- carbotioate are estimated: , , , . To assay reliability of the estimated values, transition state thermodynamic properties were calculated using PCM model at method and basis set B3LYP/6-311++G(d,p). Theoretical values of thermodynamic...