Loading...
Search for:
karimi--rezvan
0.107 seconds
Total 593 records
Curcumin incorporated PVA-borax dual delivery hydrogels as potential wound dressing materials—Correlation between viscoelastic properties and curcumin release rate
, Article Journal of Applied Polymer Science ; Volume 135, Issue 45 , 2018 ; 00218995 (ISSN) ; Pircheraghi, G ; Bagheri, R ; Sharif University of Technology
John Wiley and Sons Inc
2018
Abstract
Poly(vinyl alcohol) (PVA) is a biocompatible polymer which can be physically crosslinked by Borax to form hydrogel. PVA-Borax (PB) hydrogel is a promising candidate for drug delivery system. Therefore, it is necessary to find the quantitative relationship between drug release rate and network structure of PB hydrogels to predict and control drug release rate. In this work, at first step the optimum ratio of Borax: PVA was determined by studying the interactions between PVA chains and Borax molecules by means of Fourier transform infrared spectroscopy, while viscoelastic properties of prepared PB hydrogels were measured in the oscillatory shear flow field. In the following, curcumin as a...
Effect of Major Principal Stress Direction Rotation on Cyclic Behavior of Dense Sand Using Dynamic Hollow Cylinder Aparratus
, M.Sc. Thesis Sharif University of Technology ; Jafarzadeh, Fardin (Supervisor)
Abstract
In the past years a lot of research has been done on effects of different parameters on dynamic behavior of soils. According to these studies, principal stress direction rotation and intermediate principal stress coefficient have a major effect on monotonic behavior of soils, but more studies needed for observingtheir effect on dynamic behavior of soils.
In recent study undrained isotropic consolidated specimens of dense Babolsar sand subjected to α changes using dynamic hollow cylinder apparatus and the inner and outer cell pressure kept constant so that b was relative to α changes.
Fisrt series of testswere done to find an appropriate value for induced cyclic deviator stress. The...
In recent study undrained isotropic consolidated specimens of dense Babolsar sand subjected to α changes using dynamic hollow cylinder apparatus and the inner and outer cell pressure kept constant so that b was relative to α changes.
Fisrt series of testswere done to find an appropriate value for induced cyclic deviator stress. The...
The Study on Relationship between Viscoelastic Properties and Drug Release of Wound Dress Polyvinyl Alcohol Hydrogel
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Reza (Supervisor) ; Pircheraghi, Gholamreza (Supervisor)
Abstract
Wound is a defect or failure in the skin texture which occurs as a result of physical or heat injuries or physiological conditions. The wound dress as a temporary cover can improve wound healing process and due to the unique properties, hydrogels have become appropriate choice for this application. Hydrogel’s structure allows drug to be loaded in the wound dress. Hydrogel wound dress should have adequate fluidity to cover wound’s bed and make full contact with the skin. Sufficient cohesion and strength is also necessary to allow the wound dress to remove from wound completely. Therefore, the study on the viscoelastic properties of hydrogel is important. In this study, polyvinyl alcohol...
Tailoring Software Testing Techiques for Product Line Engineering
, M.Sc. Thesis Sharif University of Technology ; Mirian-Hosseinabadi, Hassan (Supervisor)
Abstract
In industry it is usual to develop a family of similar software instead of a single one. Software product-line (SPL) engineering or family-based software engineering is an approach that tries to minimize needed effort and time-to-market and maximize quality of manufactured products through strategic planning for maximizing reuse among members of the family. On the other hand it is known that testing software is an indivisible part of software development process which requires considerable time and effort. With large number of products created from an SPL, it is obvious that testing should be conducted in such a way that needed effort does not maintain a linear relationship with number of...
Parametric Investigation on Microstructure and Mechanical Properties of Ultrasonic Spot welded Aluminium and Copper Sheets
, M.Sc. Thesis Sharif University of Technology ; Kokabi, Amir Hossain (Supervisor) ; Abedini, Rezvan (Co-Supervisor)
Abstract
Ultrasonic metal welding is a solid state welding process and is widely used in welding the connections of lithium-ion battery batteries in hybrid and plug-in hybrid vehicles. This welding process has advantages over fusion welding processes such as; Shorter time, no heat affected area, optimal energy consumption, cheaper equipment and no harm to the environment. The aim of this study was to investigate the effect and optimization of time, normal pressure and oscillation amplitude parameters in order to achieve the maximum tensile-shear test force and T-peel test in the dissimilar welding of 1050 aluminum and copper (purity above 99.9%). In order to achieve the optimal state of welding...
An Investigation into the Hot Tensile Properties of a Heat Resistant Steel
, M.Sc. Thesis Sharif University of Technology ; Karimi Taheri, Ali (Supervisor)
Abstract
The microstructures of stainless steels consist of an austenitic matrix with almost continuous network of primery carbides.This class of steel had replaced the traditional super alloys with a reduction in costs and has similar properties under conditions of creep, which is one of the principal degradation mechanisms leading to failure in service at elevated temperaturs , therefore, their mechanical properties such as tensile strength and creep resistance are particularly important in hot deformation. Recently the effects of temperature and aging time on static strain aging in worked stainless steel have been investigated. In this study the deformation behavior of HP-series austenitic...
Optimal Design of Partial State-Feedback Controllers
, M.Sc. Thesis Sharif University of Technology ; Karimi, Houshang (Supervisor) ; Karimi, Masoud (Supervisor)
Abstract
Design of optimal controllers for nonlinear systems and even for linear systems is one of the most important parts of the control science. In optimal controller design, our aim is to maximize or minimize some kind of cost function associated with that particular problem. Such cost functions are usually combining the overall control effort, system’s energy, or some other important specifications of the system. Explicit solution for linear quadratic controllers exists under some mild conditions such as stabilizability of the system. The solution is in the form of a full state-feedback law. But in practical problems, we may not have access to all of the system state variables. The problem can...
Decentralized adaptive control of large-scale affine and nonaffine nonlinear systems
, Article IEEE Transactions on Instrumentation and Measurement ; Volume 58, Issue 8 , 2009 , Pages 2459-2467 ; 00189456 (ISSN) ; Menhaj, M. B ; Karimi Ghartemani, M ; Saboori, I ; Sharif University of Technology
2009
Abstract
This paper presents a decentralized adaptive control design for a class of large-scale nonlinear systems with unknown subsystems. When the subsystems are modeled by affine equations, a direct adaptive controller is devised based on the Lyapunov theory, so that the stability of the closed-loop system is guaranteed by introducing a suitably driven adaptive rule. A neuro-based structure is proposed when the subsystems are nonaffine, and the stability analysis is also performed based on the Lyapunov theory. Moreover, the unknown interactions among the subsystems are considered as having a nonlinear function against the simple form considered for the affine case. The proposed controllers are...
Perylene bisimide-based nanocubes for selective vapour phase ultra-trace detection of aniline derivatives
, Article Analytica Chimica Acta ; Volume 1238 , 2023 ; 00032670 (ISSN) ; Bagheri, H ; Karimi, M ; Karimi, M ; Jamali, S ; Sharif University of Technology
Elsevier B.V
2023
Abstract
Rapid and selective detection of biomarkers at trace levels is a highly coveted objective in the early diagnosis of cancer. Herein, we disclose the design and synthesis of a polyhedral oligomeric silsesquioxane (POSS) substituted perylene diimide. This compound is fully characterized in solution by multi nuclear NMR, as well as in gas state by ESI-MS. Surprisingly, solid-state characterization revealed an unusual cubic morphology with particle dimensions of 80–160 nm. Fluorescence studies indicate that the bulky POSS units effectively prevent perylene's aggregation caused quenching, yielding quantum yields as high as 92%. Exposing the sensor droplet-cast on quartz to anline and o-toluidine,...
Investigation of Operating Parameters for Thorium Adsorption from Wastewater by Using of Radiated Grafting Polymeric Adsorbents in Packed Bed Column
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohamad (Supervisor) ; Torab Mostaedi, Meysam (Supervisor) ; Asadollahzadeh, Mehdi (Co-Supervisor) ; Torkaman, Rezvan (Co-Supervisor)
Abstract
Today, the pollution of heavy metals in wastewater and surface waters, which is a global environmental problem, has increased with the expansion of various industrial activities. Heavy metals cause serious health problems due to their accumulation in human and animal tissues. Thorium, is a radioactive element with an atomic number of 90 that is widely used in the optics, aerospace, metallurgy and chemical industries, in the manufacture of high-strength alloys, in UV photocells, and especially in the nuclear industry. The primary sources of radioactive wastewater include nuclear power plants, nuclear energy industry research centers, medical institutions, industrial production, universities,...
Nonlinear adaptive control of grid-connected three-phase inverters for renewable energy applications
, Article International Journal of Control ; 2015 ; 00207179 (ISSN) ; Namvar, M ; Karimi, H ; Piya, P ; Karimi Ghartemani, M ; Sharif University of Technology
2015
Abstract
Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters’ changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the...
Nonlinear adaptive control of grid-connected three-phase inverters for renewable energy applications
, Article International Journal of Control ; Volume 90, Issue 1 , 2017 , Pages 53-67 ; 00207179 (ISSN) ; Namvar, M ; Karimi, H ; Piya, P ; Karimi Ghartemani, M ; Sharif University of Technology
2017
Abstract
Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters’ changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the...
Decentralized Control of a Multi-DG Microgrid in Islanded Mode of Operation
, M.Sc. Thesis Sharif University of Technology ; Karimi, Houshang (Supervisor) ; Karimi, Masoud (Supervisor)
Abstract
A control strategy for islanded (autonomous) operation of a microgrid consisting of two Distributed Generation (DG) units is proposed in this thesis. The DG units are connected together in a radial configuration. Each DG unit utilizes a voltage-sourced converter (VSC) to interface to its dedicated load. The DG units and the loads are to operate in the islanded mode of operation. To provide autonomous operation for the microgrid, voltage and frequency of the loads should be regulated. The proposed control strategy utilizes (i) an internal oscillator for frequency control in an open loop manner and (ii) a decentralized servomechanism controller to regulate the load voltage. The microgrid is...
Adolf Grünbaum on the steady-state theory and Creatio continua of matter out of nothing
, Article Zygon ; Volume 46, Issue 4 , 2011 , Pages 857-871 ; 05912385 (ISSN) ; Sharif University of Technology
2011
Abstract
The ideas of creatio ex nihilo of the universe and creatio continua of new matter out of nothing entered the arena of natural science with the advent of the Big Bang and the steady-state theories in the mid-twentieth century. Adolf Grünbaum has tried to interpret the steady-state theory in such a way, to show that the continuous formation of new matter out of nothing in this theory can be explained purely physically. In this paper, however, it will be shown that Grünbaum's interpretation encounters at least three problems: not distinguishing between material and efficient causes, inconsistency, and misconceiving the law of density conservation
A distortion-free phase-locked loop system for FACTS and power electronic controllers
, Article Electric Power Systems Research ; Volume 77, Issue 8 , 2007 , Pages 1095-1100 ; 03787796 (ISSN) ; Sharif University of Technology
2007
Abstract
This paper presents a single-phase phase-locked loop (PLL) system which is primarily free from the double-frequency ripples from which the conventional PLL system suffers. The proposed PLL is then extended to reject the harmonic components from the input signal and to estimate the phase-angle and frequency of the distorted input signal with no error. Three units of the proposed PLL can be used in three-phase power systems, such as FACTS and HVDC converters, to estimate the phase-angles of the individual phases with no double-frequency ripples and without sensitivity to the presence of harmonics and inter-harmonics. This makes the proposed PLL unique and desirable for applications which...
A novel three-phase magnitude-phase-locked loop system
, Article IEEE Transactions on Circuits and Systems I: Regular Papers ; Volume 53, Issue 8 , 2006 , Pages 1792-1802 ; 10577122 (ISSN) ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2006
Abstract
A novel three-phase magnitude-phase-locked-loop system (3MPLL) for use in the general area of three-phase (power, energy and power electronic) systems is introduced. The proposed 3MPLL suppresses the noise and distortion from the input signal, mitigates the unbalance, and synthesizes the instantaneous positive-sequence component of the input signal; thus it operates as a nonlinear adaptive notch (or band-pass) filter. The 3MPLL also adaptively tracks and estimates the magnitude, phase angle, and frequency of the input signal; thus, its operation as a nonlinear state estimator. Characteristics of the 3MPLL including its mathematical equations as well as steady-state and dynamic responses are...
Synthesis and Characterization of Polymer Nanofibers Modified by Using of Radiated Grafting for Adsorption of Molybdenum Ions from Aqueous Solution
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohammad (Supervisor) ; Asadollahzadeh, Mehdi (Supervisor) ; Torkaman, Rezvan (Co-Supervisor) ; Torab Mostaedi, Meysam (Co-Supervisor)
Abstract
Molybdenum is one of the important elements of the intermediary metal with atomic number 42, which is used in various industries, but among the important uses of this metal in the nuclear industry, we can mention the presence of this element in the production of yellow cake as an impurity and also as a precursor for the production of radiopharmaceuticals. It is one of the impurities that remain in all stages of yellow cake production along with uranium, and the high presence of this element causes the centrifuges to become unbalanced during the injection of "U" "F" _"6" gas, and on the other hand, technetium, the main ingredient in the production of radiopharmaceuticals, It comes from the...
Design and optimization of a cascade thermoacoustic Stirling engine
, Article Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy ; Volume 227, Issue 7 , September , 2013 , Pages 814-824 ; 09576509 (ISSN) ; Ghorbanian, K ; Sharif University of Technology
Professional Engineering Publishing
2013
Abstract
This article deals with the design and optimization of a cascade thermoacoustic Stirling engine. Different configurations for cascade thermoacoustic Stirling heat engine are investigated. A simplified model is proposed to enable initial design guidelines. The most important characteristics of the cascade system are examined. The results indicate that the thermoacoustic engines in cascade configuration may achieve very low onset temperatures. A suitable configuration is selected and the locations and dimensions of different thermoacoustic units are optimized to achieve low onset temperatures as well as high values for the acoustic power output and efficiency. The results support the...
Development of a dynamic long-term water allocation model for agriculture and industry water demands
, Article Water Resources Management ; Volume 24, Issue 9 , 2010 , Pages 1717-1746 ; 09204741 (ISSN) ; Ardakanian, R ; Sharif University of Technology
2010
Abstract
Demands growth and water resources limitation, enforce water sector policy makers to integrate water supply-demand interactions in a coherent framework for efficient water allocation. Water supply-demand interaction, changes long-term trend of water demands, which in turn has a substantial influence on water allocation. Researches on water allocation modeling lack adequate projection of relationship between water supply and demand. Socio-economic factors representing water allocation stakeholders' benefits, account for the main share of water supply-demand interaction. Identification, representation and consideration of these factors in a water allocation model, is the main limitation of...
Reduction of multi-path effect based on correlation decomposition in a DOA estimation system
, Article Signal Processing and Intelligent Systems Conference, 16 December 2015 through 17 December 2015 ; 2015 , Pages 10-14 ; 9781509001392 (ISBN) ; Farzaneh, F ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
The multi-path phenomenon is one of the main causes of error in Direction Of Arrival Estimation systems which are located in a complex environment. The received signal in this environment consists of Line Of Sight (LOS) and multi-path components which are delayed versions of the LOS signal with the amplitude and the phase depending on the path length. In order to eliminate the multi-path signal, it is necessary to estimate the amplitude, the phase, and the delay of the signal. To this end, a method based on correlation which has been already used to estimate amplitudes and delays of Line Of Sight and multi-path signals in GPS systems, is implemented. After this estimation process, a phase...