Sharif Digital Repository

In this thesis, the aim is to stating some of the noncommutative geometry(NCG) applications in formulating and describing the gravity. So, in the first chapter, we will work on some of metric aspects of NCG. In this chapter, we will review elements of the spin geometry, specifically we will define the Dirac operator which is the most important object in this thesis. Then, we will try to find counterparts of some of Riemannian geometric notions like integral and distance in the NCG framework. We will define some notions such as noncommutative infinitesimals, Dixmier trace, Wodzicki residue, noncommutative integral and spectral triples. Then, in the second chapter, we will work on some of the... 

Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

In this thesis, desublimation (deposition) of xenon gas has been studied. Through the past decades, desublimation, became one of the important methods of separation. High purity products and applicability when common methods of separation, as distillation, are not applicable, make desublimation more efficient. Heat transfer phenomenological study of direct phase change of gas to solid (desublimation), evaluation of variation of different parameters during the phase change and finally comparison of experimental results of desublimation and mathematical modeling data are the main considerations in present thesis. Because of low cost and accessibility and heat transfer phenomenological study... 

Thermal penetration is one of the separation methods. In this process, due to the temperature difference, the concentration gradient in one of the gas or liquid phases in the resulting system and the relative separation of the components is possible. The column used for this work is the Classius-Dickel column. This column consists of two vertical plates, one warm and the other cold, spaced a short distance apart. Due to the temperature gradient, the gradient is deliberately created, which creates a concentration gradient in the column, so that the light component accumulates at the top of the column and the heavy component at the bottom of the column. The difference in concentration between... 

Natural Boron consists of two stable isotopes, 10B (19.3%) and 11B (80.7%). 10B isotope has a large thermal neutron absorption and therefore, use widely in such aspects as modern industry, atomic energy industry (as control rods, chemical shim and etc.), Medical science and applications in disclosing neutrons to measure neutron reactors fluxes. Boron trifluoride is most importantly used as a reagent in organic synthesis, typically as a Lewis acid. In this study, we designed and built the related setup for preparation of high purity BF3 gas. And then we tried to optimize the efficiency with process design tools such as response surface methodology (RSM). At the end of this study, we were able... 

Hydrogen gas is considered as a clean fuel and energy carrier that its storage for future uses is a challenging issue. One of the methods to store it, is adsorption on a group of adsorbents called metal-organic frameworks. In this research, one of these frameworks called ZIF-8, has been selected to study hydrogen storage capability. To evaluate the effect of having two metals, a mixture of two metals was used in the synthesis process. To characterize the structure of the synthesized adsorbents, X-ray powder diffraction (XRD),adsorption and desorption of nitrogen at temperature of 77 K, Field Emission Scanning Electron Microscopy (FESEM), energy-dispersive X-ray Spectroscopy (EDS) and... 

Although technological specialization has been recognized as a stimulating factor of international trade (Ricardian theory), new approaches emphasize the endogeneity of technological heterogeneity across countries. Following them, we proceed to examine the effect of free trade on technological differences among 20 OECD members during 1996-2008. We first use the model of Eaton and Kortum (2002) to obtain an annual estimate of technological heterogeneity within the OECD group. We then analyze the behavior of this index facing international trade statistics in the same period. The results show that the OECD countries have been experienced a technological convergence, thanks to a boost in the... 

In the nuclear industry, gas centrifuges are considered of high importance for the purpose of uranium enrichment. Today, with advances in science and technology, the use of gas centrifuges for separating isotopes other than uranium, is so common. With respect to the use of conventional methods such as Pancake equation in calculating the velocity profile in centrifuges, it is needed that A^2=(MV^2)/2RT≫1 (M: Feed molecular weight; V: Peripheral speed of centrifuge; T: Mean temperature of feed; R: The universal constant of gases). While the molecular weight of the feed mixture gets lower, the A2 parameter gets closer to one. So, other methods for modeling the behavior of the gas in the... 

The use of medicinal plants to improve living standards has coincided with the history of human life. Throughout history, man has had no choice but to resort to plants. Among all the plants, Iranians have had a deep connection with Mohammadi flowers and throughout history have tried to extract the plant in various ways. Therefore, in this article, we have examined the method of supercritical extraction. In order to create a criterion for comparing the maximum extraction rate with the Soxhlet method and with the help of normal hexane solvent, the extraction operation was performed and its efficiency was estimated to be equal to 1.02%. Then, with supercritical experiments, it was found that... 

The chemical vapor deposition (CVD) of graphene from methane on a copper substrate is the most promising method for production of large-area graphene films. There have been long-standing challenges in this field such as controlling the graphene coverage, film quality, the number of layers, and the nucleation density of graphene domain. These challenges can be overcome by developing a fundamental understanding of the graphene growth process. The main aim of this study is to control nucleation density of graphene domains. Chemical vapor deposition (CVD) graphene is polycrystalline, and grain boundaries in graphene film have been identified to degrade the properties of graphene as a membrane... 

Different catalysts have been proposed for CO oxidation reaction and still many researches are performed to obtain a catalyst with high activity and stability. In this study, MOFs of CuBTC, MIL-101(Cr), and NH2-MIL-101(Cr) and active metal of Pd have been selected and their performances have been investigated in CO oxidation reaction. MOFs have been synthesized by hydrothermal method. Pd loading has been performed by impregnation method in various pH and in aqeous palladium nitrate solution and palladium nitrate solution in nitric acid. To reveal the effect of the nature of noble metal, activity of 1% Pt/MIL has been investigated. Amine-functionalized MIL-101(Cr) has been synthesized by... 

The microstructures of stainless steels consist of an austenitic matrix with almost continuous network of primery carbides.This class of steel had replaced the traditional super alloys with a reduction in costs and has similar properties under conditions of creep, which is one of the principal degradation mechanisms leading to failure in service at elevated temperaturs , therefore, their mechanical properties such as tensile strength and creep resistance are particularly important in hot deformation. Recently the effects of temperature and aging time on static strain aging in worked stainless steel have been investigated. In this study the deformation behavior of HP-series austenitic... 

In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom... 

Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater... 

Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of... 

In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

In this M.S. dissertation numerical study of slinger fuel distributer has been studied. This type of atomizer has been used in mini turbojets like Teledyne CAE.
The main purpose of this work was obtaining spray structure of slinger atomizers. This goal was achieved by implementing a UDF code in FLUENT® software to model the primary atomization that include variation of fluid from exit of slinger disk bores till formation of primary droplet. In FLUENT® the DPM method and its ability to utilizing Lagrangian approaches have been used. The result of this model is validated by the data from experimental test that can be found in Articles. This is the first time that spray structure of slinger... 

The process of injecting acid or acidizing, is one of the most common ways to stimulate oil and gas wells. The purpose of this process is to increase the productivity of the well by increasing the permeability of the reservoir rock around the well. This is especially important in carbonate reservoirs due to damage to the formation and low intrinsic permeability in some places. In order to minimize the effects of structural damage, conventional wormhole channels are created to pass through the injured area. One of the important factors in acid validation is achieving optimal injection rate, which means obtaining the highest permeability with the lowest amount of injected acid.Numerous... 

Electric vehicles (EVs) will be used rampantly in future transportation system. Although the uncontrolled charging of these EVs will be threatening for the stability and sustainability of the grid, a well-suited energy trading policy may provide a number of beneficial services to the grid as well as preserving the sustainability of the system along with heightening the performance of operation. In this paper, by taking advantage of block rate tariff, a wholesale pricing policy is introduced. A multi-objective approach is utilized to address the cost reduction and load levelling services, concurrently, in order to guarantee the profits of the both the grid and EVs. Due to the high... 

Nowadays, one of the most basic human problem is how to manage energy resources for sustainable development and how to deal with problems caused by growing energy consumption. Various scenarios are being discussd that the most important of them can be considered research on finding alternative energy sources that are renewable and do not have common pollution. Thus, according to researches carried out until now, using sources such as wind, water, solar biomass, etc. have been proposed. However, due to problems in the development of each of these sources, biomass as the primary option has been introduced. because biomass has several subsidiaries, research shows microalgaes (as a subset) are...