Sharif Digital Repository

Today, the usage of hollow membrane contactors is considered by the researchers as a novel solution in the separation and purification industry, including the sweetening of gas. Improving the performance of these devices requires a more detailed study of the process factors and changes in its chemistry. Hence, providing a suitable mathematical model by examining the details of the flow pattern within the contactor is based on the computational fluid dynamics technique in the agenda. Also, improving the absorption of components such as carbon dioxide and hydrogen sulfide from the gas mixture using chemical absorbents such as monoethanolamine will be investigated. The change in the mass... 

The failure in rolling element bearings as an important part of rotary machine can lead to machine breakdown.Consequently, bearings can reduce reliability of these components and therefore a maintenance strategy is essential to keep reliability in a desired level. The first and primitive strategy is called breakdown or unplanned maintenance. The next is preventive or planned maintenance. In this scheme, maintenance is done after a specified time period irrespective of machine health status. Out of place maintenance is the disadvantage of preventive maintenance. The most effective generation of maintenance strategy is condition based maintenance (CBM) which suggests maintenance decision based... 

With the extensive use and the growing popularity of file sharing in peer-to-peer (P2P) networks, the distribution of copyrighted files and the propagation of malwares have also increased. The increasing growth of these crimes multiplies the necessity of forensic investigation in order to detect the offenders. The yet proposed methods have sought to gather some proofs for forensic investigation by the application of some changes in clients’ programs and a constant monitoring of the network. These methods, however, have some limitations which have rendered useless the results of their application in real environments. Moreover, the important issues like the detection of the file source have... 

The aim of this research is to consider the effect of geometric changes on pumping performance of two phase gas-fluid flow in a vertical pipe. The idea is to inject a light gas to the bottom of a tube full of fluid so we will obtain an upward flow due to density differences. Potential benefits of this device are numerous such as dredging of river estuaries and harbors, sludge extraction in sewage treatment plant, water treatment and many others. There are almost four distinct flow patterns which occurs in the rise pipe, bubbly flow, slug flow, churn flow and annular flow that each of them require special conditions. heat transfer between two phases, phase changes, mass and volume rate... 

This master’s thesis has three chapters. In the first and second chapters provided all the necessary preparations for the third chapter to describes the following article: Lewis, D. W, Units in Witt rings, Commun. Algebra 18, no. 10, 3295-3306 (1990).The first chapter includes an introduction of quadratic forms and Witt ring on fields with characteristic unequal 2, studing W b(F) in the category of commutative rings and introduction of formally real and nonreal fields. In this chapter there are important theorems such as Witt’s Decomposition and Cancellation Theorem, Cassels Representation, Springer and Pfister’s Local-Global Principle. The second chapter introduces the discretely valuated... 

Progress in analysis of multicomponent mixtures and processes focused on the interpretation of the multivariate responses, rely on the combination of sophisticated instrumental techniques and suitable chemometric methods. Among the present chemometric method, curve resolution techniques have a wide application in the analysis of multicomponent mixtures and processes. Chemometric resolution techniques are used in the present work. At the first, Essential oil of green and black cardamoms was extracted by hydrodistillation and was analyzed by gas chromatography–mass spectrometry (GC-MS). Due to the fact that the essential oils are complex mixtures, strong overlap is observed between the peaks.... 

Three-phase voltage source converter (VSC) is vastly utilized in the renewable energy resource and distributed generation (DG) systems interface units due to its high controllability and flexibility. Because of the high nonlinear nature of the system, the gird-connected inverter shows poor performance if the conventional control scheme are used. In this thesis, a new control scheme based on backstepping strategy is presented for control of a grid connected DG systems. The proposed scheme is responsible for regulating the active and reactive power components of the VSC power of the DG system. The VSC of the DG system is connected to a stiff utility grid through an L-type filter. In the first... 

In order to reduce investment and operation costs of the power systems, transmission expansion planning is inevitable. In fact, transmission expansion planning is to determine when, where and how many lines need to be added to power system with a minimum of investment and operating costs. In this thesis, transmission expansion planning has been performed at uncertainty in generation and N-1 criterion condition where uncertainty in generation means uncertainty in the moment of adding power plant to power system. In previous studies, transmission expansion planning was performed with DC-load flow in which, the power loss and voltage profiles were ignored due to the approximation in the... 

The A-286 superalloy is an iron-nickel base alloy having properties such as oxidation resistance and high mechanical strength. In addition, good producibility and high workability are the important properties of this alloy. In the present work dynamic restoration mechanism of A-286 supper alloy during thermo-mechanical processing has been studied. The aim is to verify the dominant restoration mechanism in different deformation conditions and also to determine the desire deformation parameters for hot rolling. In this regard, utilizing compression test in the range of 950 to 1100ºC and strain rate of 0.001 to 1 per second, the strain-stress curve for this alloy was obtained. After correction... 

We study intraday patterns of trading volume, size, return, and volatility using the Tehran Stock Exchange high frequency data from 2008 to 2015. Intraday test results indicate that trade size and volume follow a J-shape behavior, whereas return and return volatility exhibit an L-shape pattern. To examine the behavior of informed traders as predicted by Barclay and Warner’s (1993), we examine midsize volume and find that it has a higher price impact compared to other trade sizes, which is consistent with the predictions of Barclay and Warner’s (1993) stealth-trading hypothesis. However, our findings do not support the intraday stealth trading pattern, as insiders prefer to trade in low and... 

Laboratory experiments were carried out to investigate the effect of ultrasound waves on sludge reduction in MBBR bioreactor for industrial wastewater. The experiments were performed using two identical 20L MBBR bioreactor under same operational conditions. In MBBR with return sludge, sludge was collected from clarifier and after being sonicated, returned to the system by pump.
For determining optimum intensity and time duration of ultrasound, 0.3lit of MBBR sludge was sonicated with intensities of 20, 30, 60, 120, 150, 250 w/cm2 and time duration of 5, 10, 15, 20, 30 min. Afterward, these two parameters were optimized with Energy Efficiency Index. As the results shown, intensity of 120... 

Fe-29Ni-17Co alloy with commercial name “Kovar” is an alloy with low expansion coefficient. The main specification of this alloy is to maintain this property at the high temperatures that is used in sealing of glass-metal. Achieving to desirable physical properties associated with suitable mechanical properties is the purpose of related industries. However the effect of cold work and heat treatment was studied on the physical properties of this alloy, there is no report about the effect of the hot work. Thus, in this investigation, the effect of the hot work on the physical and mechanical properties of Kovar was studied. At first, slabs of Kovar alloy were cast and remelted. Then,... 

Design of optimal controllers for nonlinear systems and even for linear systems is one of the most important parts of the control science. In optimal controller design, our aim is to maximize or minimize some kind of cost function associated with that particular problem. Such cost functions are usually combining the overall control effort, system’s energy, or some other important specifications of the system. Explicit solution for linear quadratic controllers exists under some mild conditions such as stabilizability of the system. The solution is in the form of a full state-feedback law. But in practical problems, we may not have access to all of the system state variables. The problem can... 

The microstructures of stainless steels consist of an austenitic matrix with almost continuous network of primery carbides.This class of steel had replaced the traditional super alloys with a reduction in costs and has similar properties under conditions of creep, which is one of the principal degradation mechanisms leading to failure in service at elevated temperaturs , therefore, their mechanical properties such as tensile strength and creep resistance are particularly important in hot deformation. Recently the effects of temperature and aging time on static strain aging in worked stainless steel have been investigated. In this study the deformation behavior of HP-series austenitic...