Sharif Digital Repository

Some sources transmit periodic and quasi periodic sparse pulse trains in the environment and a number of sensors might receive them through a single channel simultaneously. It is usually our interest to know which pulse belongs to which source. This identification process has wide applications in communications, radar system, medical applications, and neural systems. Blind source separation (BSS) is one solution for this problem. This paper proposed a geometrical approach to solve BSS problem when observations are whitened data and are obtained from the linear mixtures of 2-valued sparse signals (such as sparse pulse trains). In other words, the proposed approach aims to estimate a rotation... 

A new reactor technology is used for propane dehydrogenation over a Cr 2O 3/Al 2O 3 catalyst. This reactor allows the continuous regeneration of the catalyst, but avoids the transfer of large amounts of solid between two reactors. Good similarity between experimental work and the model is realized. This is an abstract of a paper presented at the 18th International Congress of Chemical and Process Engineering (Prague, Czech Republic 8/24-28/2008)  

The purpose of this study was to investigate the use of a horizontal packed bed bioreactor, named Biopack, to treat high strength wastewater, such as bakers yeast wastewater. The Biopack system (RBCP) is a modified rotating biological contactor and the system was applied for secondary treatment. The RBCP system produced high treatment efficiencies, COD removal was 94.9% when COD was 472 mg/l and surface organic loading = 0.187 kg COD/m2 per day and surface hydraulic loading = 6 l/m2 per day. Variations of surface hydraulic loading from 6 to 11.9 l/m2 per day produced a decrease in COD removal efficiency from 94.9 to 58.6%. Other factors, such as shock load, retention time and rotational... 

Some periodic and quasi-periodic pulse trains are emitted by different sources in the environment and a number of sensors receive them through a single channel simultaneously. We are often interested in separating these pulse trains for source identification at sensors. This identification process is termed as deinterleaving pulse trains. Deinterleaving pulse trains has wide applications in communications, radar systems, neural systems, biomedical engineering, and so on. This paper studies the deinterleaving problem with the assumption that both sources and sensors are fixed. In this study, the problem of deinterleaving pulse trains is modeled as a blind source separation (BSS) problem. To... 

This work concerns simultaneous determination of relative permeability, capillary pressure, pore size distribution (PSD), and residual oil saturation data by optimization of well testing data, and introduces a new capillary pressure relationship, based on the Weibull distribution function, for direct determination of the PSD function from capillary pressure parameters. Three consecutive injection, fall off, and production well tests are performed on a predefined synthetic reservoir through simulation, and an optimization algorithm is used to find the parameters of relative permeability and capillary pressure curves as well as the value of residual oil saturation. The PSD function is also... 

We report a novel strategy for the synthesis of magnetic nanocomposite for highly efficient catalysis. Poly(glycidyl methacrylate) (PGMA) chains were grafted to the surface of magnetic nanoparticles (MNPs) through surface-initiated reversible addition-fragmentation chain transfer polymerization. Then, the oxirane rings in the PGMA chains were opened with 2,6-diamino pyridine (DAP) molecules as ligands to prepare the solid support. Finally, this magnetic nanocomposite was used for the immobilization of gold nanoparticles. Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, gel permeation... 

Particulate matter (PM) pollution is a growing concern in urban areas in the developing countries because of its potential to aggravate cardiovascular and respiratory illnesses. Traditional approaches in monitoring urban pollutants have relied on ground-based networks even though they essentially provide point measurements and are inadequate for health alerts on large spatial and long temporal scales. Recent advances in satellite imagery has attracted managers to look into this new alternative as a predictive tool for improving air quality at urban and regional scales by providing necessary data in advance of the onset of actual severe conditions. Moderate Resolution Imaging... 

Herein, the facile and tunable technique for the preparation of novel multi-stimuli-responsive nanocomposites via RAFT polymerization for DOX delivery is reported. The influence of the molecular weight of pH- and thermo-sensitive poly (acrylic acid-co-NIPAM) (PNAx), as a macro-RAFT agent, on the nanocomposites size and drug release rate was investigated. The outcome of this study reveals that macro-RAFT agent with lower molecular weight can be attached to the surface of magnetic nanoparticles with higher content of polymeric layer than can macro-RAFT agent with higher molecular weight. Also, it was observed that the particle size, polymer grafting density, DOX loading capacity, and DOX... 

In an electronic warfare environment, an electronic support system receives signals emitted by different radars. One of the key tasks in an electronic support system is detection of Pulse Repetition Interval Modulation for these signals. In this paper we present a new robust and yet simple method for detection of complex PRI Modulation. Simulation results show that the proposed method is more robust against noise (spurious and missing pulses) and unwanted jitter than previous methods  

In this paper, LM pectin production from commercial apple pectin by using acid, alkali and ammonia methods in the presence of ethanol was studied. Also, the effect of different parameters such as, temperature, time, acid, alkali and ammonia treatment in LM pectin production were evaluated. In all the experiments, low temperature showed a better influence from a recovery, purity and low de-polymerization viewpoint. Optimum conditions in the acid method reached at pH = 2, t = 17 hrs and T = 30°C, in the alkaline method reached at pH = 11, t = 3 hrs and T = 5°C and in the ammonia method reached at 2 N ammonia and T = 5°C, were determined. © Sharif University of Technology  

This letter presents a novel method based on sparsity, to solve the problem of deinterleaving pulse trains. The proposed method models the problem of deinterleaving pulse trains as an underdetermined system of linear equations. After determining the mixing matrix, we find sparsest solution of an underdetermined system of linear equations using basis pursuit denoising. This method is superior to previous ones in a number of aspects. First, spurious and missing pulses would not cause any performance reduction in the algorithm. Second, the algorithm works well despite the type of pulse repetition interval modulation that is used. Third, the proposed method is able to separate similar... 

The original version of this article unfortunately contained a mistake. The presentation of Eq. 1,2, and 3 was incorrect.The correct versions are given below. The original article has been corrected. (Formula Presented.) (1) (Formula Presented.) (2) (Formula Presented.) (3). © 2018, Springer-Verlag GmbH Germany, part of Springer Nature  

In this study, PZT-PCN ceramic was made via sol–gel seeding method and effects of conventional sintering (CS) as well as two-step sintering (TSS) were investigated on microstructure, phase formation, density, dielectric and piezoelectric properties. First, high quality powder was achieved by seeding method in which the mixture of Co3O4 and Nb2O5 powder was added to the prepared PZT sol to form PZT-PCN gel. After drying and calcination, pyrochlore free PZT-PCN powder was synthesized. Second, CS and TSS were applied to achieve dense ceramic. The optimum temperature used for 2 h of conventional sintering was obtained at 1150 °C; finally, undesired ZrO2 phase formed in CS procedure was removed... 

In recent years there has been potential increase in the use of alkaline protease as industrial catalysts. Many major industrial and commercial applications, such as food and textile industries, and medical diagnoses, are highly dependent on the protease enzyme. In the cell immobilization technique, the free movement of microorganisms is restricted in the process, and a continuous system of fermentation can be used. In the present work, this technique has been used for alkaline protease production using different carriers, such as chitosan, corn cob and corn tassel. Enzyme activity before immobilization (72 h) was 78.3 U/ml. Corn cob, with 65% immobilization capacity and the highest enzyme...