Sharif Digital Repository

Some sources transmit periodic and quasi periodic sparse pulse trains in the environment and a number of sensors might receive them through a single channel simultaneously. It is usually our interest to know which pulse belongs to which source. This identification process has wide applications in communications, radar system, medical applications, and neural systems. Blind source separation (BSS) is one solution for this problem. This paper proposed a geometrical approach to solve BSS problem when observations are whitened data and are obtained from the linear mixtures of 2-valued sparse signals (such as sparse pulse trains). In other words, the proposed approach aims to estimate a rotation... 

This work concerns simultaneous determination of relative permeability, capillary pressure, pore size distribution (PSD), and residual oil saturation data by optimization of well testing data, and introduces a new capillary pressure relationship, based on the Weibull distribution function, for direct determination of the PSD function from capillary pressure parameters. Three consecutive injection, fall off, and production well tests are performed on a predefined synthetic reservoir through simulation, and an optimization algorithm is used to find the parameters of relative permeability and capillary pressure curves as well as the value of residual oil saturation. The PSD function is also... 

In this research, a single-period two-echelon inventory control problem with market targeting strategies is considered. In this problem, there are several final products and raw materials with varying usage rates. The objective is to determine the order sizes of final products and raw materials before the selling period such that customers' satisfaction is reached and expected profit is maximized within an available budget. The problem is first mathematically formulated and then a modified particle swarm optimization algorithm is employed to solve the nonlinear programming problem. To validate the results obtained, a simulated annealing algorithm is provided as a benchmark. The parameters of... 

In this study, a laboratory-scale biotrickling filter (BTF) is used to remove Triethylamine (TEA) from gaseous wastes. The BTF is made of stainless steel with a height of 210 cm and an internal diameter of 21 cm packed with lava rocks. TEA elimination pattern was evaluated by changing empty bed residence times (EBRTs). The maximum elimination capacity (EC) has been determined to be 87 g/m3/h. At all EBRTs 52, 31, 20, and 10 s, contaminant transferring from gas phase to liquid was more than the EC. Also, the removal efficiency was 100 % for a mass loading of 100 g/m3/h. While the liquid recirculation velocity of 3.466 m3/m2/h was maintained, the flow rate was adjusted to 60, 100, 156, and 312... 

A new reactor technology is used for propane dehydrogenation over a Cr 2O 3/Al 2O 3 catalyst. This reactor allows the continuous regeneration of the catalyst, but avoids the transfer of large amounts of solid between two reactors. Good similarity between experimental work and the model is realized. This is an abstract of a paper presented at the 18th International Congress of Chemical and Process Engineering (Prague, Czech Republic 8/24-28/2008)  

Some periodic and quasi-periodic pulse trains are emitted by different sources in the environment and a number of sensors receive them through a single channel simultaneously. We are often interested in separating these pulse trains for source identification at sensors. This identification process is termed as deinterleaving pulse trains. Deinterleaving pulse trains has wide applications in communications, radar systems, neural systems, biomedical engineering, and so on. This paper studies the deinterleaving problem with the assumption that both sources and sensors are fixed. In this study, the problem of deinterleaving pulse trains is modeled as a blind source separation (BSS) problem. To... 

We report a novel strategy for the synthesis of magnetic nanocomposite for highly efficient catalysis. Poly(glycidyl methacrylate) (PGMA) chains were grafted to the surface of magnetic nanoparticles (MNPs) through surface-initiated reversible addition-fragmentation chain transfer polymerization. Then, the oxirane rings in the PGMA chains were opened with 2,6-diamino pyridine (DAP) molecules as ligands to prepare the solid support. Finally, this magnetic nanocomposite was used for the immobilization of gold nanoparticles. Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, gel permeation... 

Particulate matter (PM) pollution is a growing concern in urban areas in the developing countries because of its potential to aggravate cardiovascular and respiratory illnesses. Traditional approaches in monitoring urban pollutants have relied on ground-based networks even though they essentially provide point measurements and are inadequate for health alerts on large spatial and long temporal scales. Recent advances in satellite imagery has attracted managers to look into this new alternative as a predictive tool for improving air quality at urban and regional scales by providing necessary data in advance of the onset of actual severe conditions. Moderate Resolution Imaging... 

Herein, the facile and tunable technique for the preparation of novel multi-stimuli-responsive nanocomposites via RAFT polymerization for DOX delivery is reported. The influence of the molecular weight of pH- and thermo-sensitive poly (acrylic acid-co-NIPAM) (PNAx), as a macro-RAFT agent, on the nanocomposites size and drug release rate was investigated. The outcome of this study reveals that macro-RAFT agent with lower molecular weight can be attached to the surface of magnetic nanoparticles with higher content of polymeric layer than can macro-RAFT agent with higher molecular weight. Also, it was observed that the particle size, polymer grafting density, DOX loading capacity, and DOX... 

In an electronic warfare environment, an electronic support system receives signals emitted by different radars. One of the key tasks in an electronic support system is detection of Pulse Repetition Interval Modulation for these signals. In this paper we present a new robust and yet simple method for detection of complex PRI Modulation. Simulation results show that the proposed method is more robust against noise (spurious and missing pulses) and unwanted jitter than previous methods  

This letter presents a novel method based on sparsity, to solve the problem of deinterleaving pulse trains. The proposed method models the problem of deinterleaving pulse trains as an underdetermined system of linear equations. After determining the mixing matrix, we find sparsest solution of an underdetermined system of linear equations using basis pursuit denoising. This method is superior to previous ones in a number of aspects. First, spurious and missing pulses would not cause any performance reduction in the algorithm. Second, the algorithm works well despite the type of pulse repetition interval modulation that is used. Third, the proposed method is able to separate similar... 

The original version of this article unfortunately contained a mistake. The presentation of Eq. 1,2, and 3 was incorrect.The correct versions are given below. The original article has been corrected. (Formula Presented.) (1) (Formula Presented.) (2) (Formula Presented.) (3). © 2018, Springer-Verlag GmbH Germany, part of Springer Nature  

In this study, PZT-PCN ceramic was made via sol–gel seeding method and effects of conventional sintering (CS) as well as two-step sintering (TSS) were investigated on microstructure, phase formation, density, dielectric and piezoelectric properties. First, high quality powder was achieved by seeding method in which the mixture of Co3O4 and Nb2O5 powder was added to the prepared PZT sol to form PZT-PCN gel. After drying and calcination, pyrochlore free PZT-PCN powder was synthesized. Second, CS and TSS were applied to achieve dense ceramic. The optimum temperature used for 2 h of conventional sintering was obtained at 1150 °C; finally, undesired ZrO2 phase formed in CS procedure was removed... 

After receiving emitted signals from various radars by electronic support measures (ESM) system, several processes are applied to signals such as: deinterleaving, recognition of pulse repetition interval (PRI) modulation, PRI estimation and etc. Indeed, recognition of PRI modulation is an essential task of ESM system. In this paper a novel and robust method for recognition of complicated PRI Modulations is presented. This method uses specifications such as distribution related to members of sequences obtained from first and second order derivation of TOAs around a constant value and continuity of these sequences to recognize the PRI modulation. Some numerical simulations are performed to... 

A lot of laboratory experiments have been carried out to investigate each aspect of ultrasonic wave s role on fluid flow behavior through porous media. Despite all experimental works, little attention has been paid for modeling the ultrasonic wave influence on capillary imbibition, which is the main mechanism of production in fractured reservoirs. At this work the process of imbibition with and without applying ultrasonic waves is mathematically modeled by modification of piston-like model. In contrast to this model s assumption, in which mobility ratio is assumed to be constant, here permeability variation due to increase in water saturation is considered in numerical solution. To evaluate...