Sharif Digital Repository

Abstract: Using adhesively bonded composite patch repairs has been increased in various industries to improve the structural integrity of cracked metallic structures in recent decades. Monitoring of crack propagation and composite patch debonding, as two dominant failure mechanisms in this repair technique, plays a significant role in the integrity assessment of the component. This research conducts an experimental investigation on the simultaneous monitoring of these two failure mechanisms in a cracked metallic specimen repaired by a composite patch. For this purpose, the electromechanical impedance method was used to evaluate the feasibility of recognizing the type of damage at any phase... 

Ground-Source Heat Pumps (GSHPs) are efficient means of space heating and cooling. However, owing to their high installation costs, their development in societies has not grown as it should. Therefore, it is crucial to have a meticulous design of these systems. The first step in designing GSHPs is determining the ground and grout thermal properties. Thermal Response Tests (TRTs) are developed for this purpose. The previous methods of estimating the unknown thermal properties are either inefficient or yield inaccurate estimates for the ground volumetric heat capacity, to which the mean fluid temperature has the slightest sensitivity among all thermal properties. Among previous methods, some... 

This contribution scrutinizes the performance of the integrated photovoltaic thermal (PVT) system with the proton exchange membrane methanol electrolyzer (PEMME) and water electrolyzer (PEMWE) as sustainable ways to produce hydrogen. Artificial neural networks (ANNs), are adopted to evaluate the effect of various operating parameters on the performance of the systems. The adopted ANNs are radial basis function (RBF), extreme learning machine (ELM), long short-term memory (LSTM), and gated recurrent unit (GRU). Moreover, to obtain the optimum performances of the systems, the multi-objective whale optimization algorithm (MOWOA) and multi-objective bat algorithm (MOBA) are implemented. It is... 

As a versatile platform for integrating renewable energies, District Heating systems (DHSs) offer a pragmatic approach toward an environmentally benign and sustainable future. This paper puts forward the feasibility evaluation of using geothermal hot spring source Heat pumps (HPs) for district heating of a village situated in the north-west of Iran, with a cold mountain climate. Solar collectors are also integrated into the DHS as a supplementary heat source. To this aim, three different renewable-energy-based district heating scenarios, viz. a Ground-Source-HP-based (GSHP), a combined GSHP-flat-plate-solar-collector (GSHP-SFPC), and a combined GSHP-linear-parabolic-solar-collector... 

Harmonic information is necessary tools in the estimation of motors life and performance. The conventional expression of harmonic amount is carried out by total Harmonic distortion. This distortion factor is only related to amplitude of harmonics while the motor loss is affected by frequency domain of them. In this paper a new definition of this factor has been presented. This definition includes the frequency of harmonics as well as their amplitudes. Experimental results verify the validity of this new definition  

A highly efficient magnetic Brønsted acid catalyst was synthesized based on immobilization of 2-methylimidazole functionalized by chlorosulfonic acid on the surface of silica-coated magnetic nanoparticles (Fe3O4@SiO2-2mimSO3H). The catalyst has an excellent activity and recyclable for at least 6 reaction runs and is proven to be highly effective in the synthes is of α-aminophosphonate compounds in a green way. The facile recovery of the catalyst is carried out by applying an external magnet device. It is both "green" and efficient. The catalyst was fully characterized by techniques of TEM, SEM, FT-IR, TGA, and elemental analysis (CHNS)  

Iran is engaged in a long-term program to improve and strengthen its position among producers of petroleum in the world. In this regard, many projects are planned and executed in different fields related to oil and gas industry. Prior to investment in new projects, it is essential to understand and manage major corporate risks and their related consequences. Due to nature of petroleum industry, Health, Safety and Environmental (HSE) issues are associated with such projects and have always been matters of concern. This paper directs readers towards the integrated HSE approach from concept to affect project construction phase. The process of oil production includes exploration, extraction and... 

In this paper, it is shown that the main source of mechanical energy of cardiovascular (CV) system i.e., rhythmic heart contraction is transformed to the oscillations of the CV walls and blood flow, and finally CV acoustical waves. These waves propagate through both blood flow (hemodynamical pathways) and tissues (viscoelastical pathways) toward the skin. Nonetheless, the CV walls could be assumed as the source of acoustical waves, since they act as the interface between blood flows and other tissues including skin. After obtaining the approximate accelerations of CV walls from pressure-flow (PF) models, we also needed to model the viscoelastical pathways until the skin. Some improvements on... 

Autism spectrum disorder (ASD) includes different neurodevelopmental disorders characterized by deficits in social communication, and restricted, repetitive patterns of behavior, interests or activities. Based on the importance of early diagnosis for effective therapeutic intervention, several strategies have been employed for detection of the disorder. The artificial neural network (ANN) as a type of machine learning method is a common strategy. In the current study, we extracted genomic data for 487 ASD patients and 455 healthy individuals. All individuals were genotyped in certain single-nucleotide polymorphisms within retinoic acid-related orphan receptor alpha (RORA), gamma-aminobutyric... 

Ta0.8Hf0.2C ceramic has the highest melting point among the known materials (4000°C). Spark plasma sintering is a new route for consolidation of materials, specially ultra high temperature ceramics (UHTCs), which are difficult to be sintered at temperatures lower than 2000°C.The purpose of this study is to consolidate Ta0.8Hf0.2C by spark plasma sintering at low temperature using MoSi2 and TaSi2 as sintering aid. In this regard, effect of different amounts of sintering aids and carbides ratio on densification behavior and mechanical properties of Ta1-xHfxC were investigated.Fully consolidation of Ta0.8Hf0.2C was achieved in presence of 12vol.% sintering aid after sintering at 1650°C for 5min... 

The interactions between five amino acid based anions ([AA] - (AA = Gly, Phe, His, Try, and Tyr)) and N7,N9-dimethylguaninium cation ([dMG] +) have been investigated by the hybrid density functional theory method B3LYP together with the basis set 6-311++G(d,p). The calculated interaction energy was found to decrease in magnitude with increasing side-chain length in the amino acid anion. The interaction between the [dMG] + cation and [AA] - anion in the most stable configurations of ion pairs is a hydrogen bonding interaction. These hydrogen bonds (H bonds) were analyzed by the quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analysis. Finally, several correlations... 

The aim of this study is to investigate the uniform cooling of a hot isothermal heated target surface, using four turbulent impinging air jets. Eight parameters including the width of jets, the space between the inner jets, the space between inner and outer jets, the distance of jets from the plate, the impingement angle of jets, and the overall volumetric flow rate of the cooling air per unit depth of the nozzle are considered as design variables. The normalized standard deviation of the local Nusselt number from the desired Nusselt number is considered as the objective function. An optimization algorithm based on pattern search method is utilized to obtain the optimum array of the jets.... 

Horizontal ground heat exchangers (GHEs) have a lower cost in comparison to vertical ones; however, they require more land area. For the sake of reducing the required land area for horizontal GHEs, flat-panel GHEs have been recently introduced. In this piece of research, a 3-D numerical model has been developed to predict the thermal performance of flat-panel GHEs. In this study, at first, the thermal performance of a flat-panel GHE has been compared with that of linear horizontal ones. The results demonstrate that the flat-panel GHE has a better thermal performance of about 27% in comparison to an arrangement of linear GHEs with a value of 0.5 m for pipe spacing. In the second part of this... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

Hydrogen bonding interactions between thymine nucleobase and 2'-deoxythymidine nucleoside (dT) with some biological anions such as F - (fluoride), Cl - (chloride), OH - (hydroxide), and NO 3 - (nitrate) have been explored theoretically. In this study, complexes have been studied by density functional theory (B3LYP method and 6-311++G (d,p) basis set). The relevant geometries, energies, and characteristics of hydrogen bonds (H-bonds) have been systematically investigated. There is a correlation between interaction energy and proton affinity for complexes of thymine nucleobase. The nature of all the interactions has been analyzed by means of the natural bonding orbital (NBO) and quantum theory... 

Density functional theory (DFT) method and B3LYP/6-311++G(d,p) basis set were used to determine coordination geometries, binding strength, and metal ion affinity (MIA) for interaction of 2′-deoxythymidine (dT) with alkali metal cations including Li+, Na+, and K+. Calculations demonstrated that the interaction of dT with these cations is tri-coordinated η (O2, O4′, O5′). Among these cations, Li + cation exhibited the most tendency for interaction with dT. Cations via their interaction with dT can affect the N-glycosidic bond length, the values of pseudorotation of the sugar ring, the orientation of base unit with respect to sugar ring and the acidity of O5′H, O3′H, and N3H groups in 2′-dT... 

TiO2 layers were grown via pulse type microarc oxidation process under different applied voltages, frequencies, and duty cycles. Surface chemical composition and phase structure of the synthesized layers were studied utilizing X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Furthermore, scanning electron microscope (SEM) and atomic force microscope (AFM) were employed to investigate surface morphology and topography of the layers. It was revealed that the layers had a porous structure with both anatase and rutile phases. The anatase relative content in the layers increased with the applied frequency; meanwhile, it decreased with duty cycle at low applied voltages, but...