Sharif Digital Repository

The N-doped rGO/NiFe2O4@Ti-doped ZnO as a novel ternary nanocomposite with magnetic recyclable was obtained by a facile and low-cost hydrothermal method. The structure, morphology, and optical as well as magnetic properties of synthesized nanocomposite were analyzed using the X-ray diffraction (XRD), Fourier-transform infrared spectra (FTIR), Raman spectroscopy, Emission scanning electron microscopy (FESEM) with Energy dispersive spectra, Transmission electron microscopy (TEM), UV-vis diffusive reflectance spectra, and Vibrating sample magnetometer (VSM). The photocatalytic activity was determined by the degradation of Methylene blue (MB) and Methylene orange (MO) dyes under visible light... 

Considering the importance of producing antibacterial glazes, the effect of adding copper oxide/calcium carbonate nanocomposite to tile glaze has been investigated in this research. Copper oxide/calcium carbonate nanocomposite was synthesized using the combustion sol-gel method. The structure of the nanocomposite was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Finally, nanocomposites with two different molar percentage ratios of copper oxide: calcium carbonate were synthesized, and various percentages of these nanocomposites were added to the glaze slurry. Ultimately, the antibacterial effects of the resulting samples were assessed, which displayed a... 

Cancer is one of the most important problems that affects public health. If this disease is diagnosed quickly in the patient's body, it can be prevented and treated by determining the stage of the disease and establishing a treatment protocol. Magnetic resonance imaging (MRI) and fluorescence imaging (FI) are among the imaging methods. In order to increase the contrast of images, researchers have turned to the synthesis of materials under contrast agents, which improve diagnostic sensitivity. Synthesis of nanoparticles as multi-mode contrast agents can enhance imaging methods. In this research, the synthesis and characterization of the multifunctional Fe3O4-Mn3O4-LCysteine@g-C3N4 QDs system... 

Implant primary stability is a crucial component of implant survival. Primary mechanical stability is correlated with implant type, surgical technique, quantity and quality of bone at the recipient site. Since bone integration (BI) significance has been acknowledged, a variety of techniques have been developed to quicken BI and achieve faster fixation. Studies have shown that material type, and many surface properties, including as surface composition, roughness, topography, and energy, have a significant influence during the early stages of bone integration to the implant. In this work, we did synthesis one-dimensional nanoneedle-like arrays of hydroxyapatite using the injection method... 

Supercapacitors are safe and environmentally friendly energy storage devices that have been considered for their diverse applications. One of the most important factors that control supercapacitors' capacity is the electrode material's structure and properties. Adding heteroatoms or composite materials synthesis is one way to improve electrode performance. In this study, a facile, fast, and economical hydrothermal method was used to synthesize N doped, P doped or N/P co-doped 3D reduced graphene oxide (rGO) for high-performance supercapacitor application. Nitrogen and phosphorus elements were replaced by carbon atoms simultaneously during the graphene oxide hydrothermal reduction procedure.... 

Capacitive deionization (CDI) is a suitable method for water desalination with low energy consumption and high efficiency, which does not have secondary pollution and is environmentally friendly. The hybrid capacitive deionization uses a faradaic electrode next to the carbonaceous electrode, taking advantage of both electrodes, and high capacities have also been reported. Titanium carbide Mxene is an important candidate in CDI due to its high electrical conductivity and tunable interlayer distance, but Mxene suffers from low oxidation resistance. Therefore, in this research, molybdenum disulfide (MoS2) that is an essential member of the 2D transition metal dichalcogenides family, was used as... 

This study investigates the effect of adding hydroxyapatite nanoparticles and multi-walled carbon nanotubes in pure and modified form on the flexural properties and hardness of denture base Polymethyl Methacrylate. Polymethyl Methacrylate (PMMA) is still the most common denture base material. In fact, the mechanical properties of this resin have played a significant role in expanding its use in dentistry. But in the long-term use of resins, defects such as low resistance to crack growth, low flexural strength and brittleness can be seen. In fact, flexural fatigue occurs as a result of repeated flexural stresses, and it can be described as the main reason for crack growth and propagation in... 

Bone scaffolds are used to regenerate bone tissue and accelerate bone healing, for this purpose, an attempt was made to prepare biocompatible, biodegradable, low toxicity and non-allergenic scaffolds to help increase osteogenesis and improve bone infections. A porous multi-component composite of chitosan, hydroxyapatite, graphene oxide functionalized with silver was made to make the desired scaffolds. At first, graphene oxide was functionalized by silver ions using silver nitrate. The structure of silver graphene oxide nanocomposite was confirmed by scanning electron microscope (SEM), Fourier infrared spectroscopy (FT-IR), and ultraviolet (UV-Visible) spectroscopy. In the next step, a... 

Reaction parameters in precipitation processes have a significant impact on the product characteristics. The process of formation of yttrium-stabilized zirconia precipitates was studied by co-precipitation method to investigate the parameters affecting particle size distribution. These studies aimed to investigate the reaction parameters and determine their effect on the size of the particles, taking into account the effects caused by the interaction of the parameters. To achieve this goal, the design of the experiment based on response surface methodology was used and five parameters of zirconyl chloride concentration, molar percentage of yttrium oxide, reaction time, mass percentage of... 

Titanium carbide MXene (Ti_3 C_2 T_x) has attracted significant research interest because of its extraordinary advantages as advanced electrode material for energy storage. In this study, 4-aminodiphenylamine functionalized Ti_3 C_2 T_x/polyaniline composite synthesized by in situ growth of PANI on 4-aminodiphenylamine functionalized Ti_3 C_2 T_x nanosheets. First, Ti_3 C_2 T_x MXene nanosheets was prepared according to the minimally intensive layer delamination (MILD) method followed by sonication. Ti_3 C_2 T_x nanosheets were modified with 4-aminodiphenylamine diazonium salt. The FTIR، FE-SEM and EDS analysis were used to characterize modified Ti_3 C_2 T_x. Finally, the Ti_3 C_2 T_x... 

Due to the environmental problems of lead and the prohibition of its use, lead-free piezoceramic sodium-potassium niobate, KNN, are one of the main candidates to replace lead-containing piezoceramics, PZTs. High Curie temperature, low density, and compatibility with nickel electrodes are its distinguishing features from other piezoelectric materials. The crystal structure of this material varies with temperature and includes rhombohedral, orthorhombic, tetragonal, and cubic. Various synthesis and manufacturing methods including hydrothermal, solid-state reaction, sol-gel, molten salt, etc. are used for this material. In this research, the hydrothermal synthesis method is used due to its high... 

a graph into specific subgraphs. Specially, decomposing the edges of a complete graph into cycles with determined length draws the main attention. Most of the former works in this area were studied the Alspach conjecture. In another words, Alspach conjecture states that ” Is the obvious necessary conditions for decomposing a graph into cycles (equality of the edges count with sum of cycle lengths) with specified length but not necessarily identical are also sufficient.” Different cases of Alspach conjecture have been studied and proved completely.The decomposition of a complete graph into cycles with the same length k is called k-cycle system. Steiner triple system is a 3-cycle system....