Sharif Digital Repository

Thermomechnical processing and controlled rolling of microalloyed steel sheets are affected by several factors according to the final properties of product. To create the high mechanical properties, a uniform and fine-grain structure is necessary in hot rolled final products. To produce such microstructures, every stage of the thermomechanical processing of the steel rolling has to be carefully controlled. Hence, first step is grain coarsening control that it usually occurs during reheating for slab. For this purpose, seven different reheating temperatures between 1000 to 1300 °C with 50 °C increments were chosen in this investigation for soaking treatment. By soaking the specimens in... 

The design of controlled rolling process of microalloyed steel sheets is affected by several factors. In this investigation, effect of the reheating, finishing and coiling temperatures of rolling, which are considered as the most effective parameters on microstructure of hot rolled products has been studied. For this purpose, seven different reheating temperatures between 1000 to 1300°C with 50°C increments, three different finishing temperatures of 950, 900 and 850°C below the non-recrystallization temperature and one temperature of 800°C in the inter critical range and four different coiling temperatures of 550, 600, 650 and 700°C were chosen. By soaking the specimens in furnace, the grain... 

Thermo mechanical processing and controlled rolling of microalloyed steel sheets are affected by several factors. In this investigation, finishing temperature of rolling which is considered as the most effective parameters on the final mechanical properties of hot rolled products has been studied. For this purpose, three different finishing temperatures of 950, 900 and 850 °C below the non-recrystallization temperature and one temperature of 800 °C in the intercritical range were chosen. It is observed that decreasing the finishing temperature causes increase of strength and decrease of total elongation. This is accompanied by more grain refinement of microstructure and the morphology was... 

Nowadays, diversion of products distribution from authorised channels to the gray markets is one of the main challenges of manufacturers. Suppose an international supplier distributes the products in several countries with different prices. In parallel importation, there are unauthorised distributers who supply products with a lower price and import them to a higher price market. The problem of parallel importation considering a manufacturer and a competitor is analysed using the game theory approach in this article. We investigate the pricing strategy for manufacturers and the effect of unauthorised distributer on price, market share and profit. We also investigate the performance of... 

In large population Speaker Identification (SI), computation time has become one of the most important issues in recent real time systems. Test computation time depends on the cost of likelihood computation between test features and registered speaker models. For real time application of speaker identification, system must identify an unknown speaker quickly. Hence the conventional SI methods cannot be used. In this paper, we propose a two-step method that utilizes two different identification methods. In the first step we use Nearest Neighbor method to decrease the search space. In the second step we use GMM-based SI methods to specify the target speaker. We achieved 3.5× speed-ups without... 

This paper is concerned with tele-presence and tele-operation of autonomous vehicles over the Additive White Gaussian Noise (AWGN) channel. This wireless communication channel is subject to transmission noise and transmission power constraint. An encoder, decoder and controller are proposed by implementing a novel linearization method for linearizing the nonlinear dynamic systems at operating points. For the linearized systems, the encoder, decoder and controller are implemented that were previously proposed for output tracking as well as stability of linear dynamic systems. Two novel linearization methods are proposed and their satisfactory performances are proved for output tracking as... 

Nanostructured copper-doped uorapatite (Cux.Ca(10X).(PO4)6.F2) having crystallite sizes of 19, 29, and 34 nm at x = 0:9, 0.4, and 0.0, respectively, was synthesized by planetary ball milling of CaO, P2O5, CaF2, and CuO powders. Specifications of the products were determined by Fourier-transform infrared spectroscopy, eld emission scanning electron microscopy, transmission electron microscopy, and X-ray di raction analyses. In-vitro studies and Mossman's Tetrazole Test (MTT) assays were also conducted by incubating Cux.Ca(10X).(PO6).F2 powder into Kokubo's Simulated Body Fluid (SBF) and against BT-20 cell, respectively, to determine bioactivity and biocompatibility of the materials.... 

The presence of impurities in the copper electrolyte increases the energy consumption of an electrorefining process and contaminates the deposited copper on cathode. The concentration of impurities increases over time making it necessary to remove them from the solution. This research introduces a fast, effective, and simple method to refine the industrial electrolyte from arsenic, iron and antimony by solvent displacement crystallisation technique. In this method, when alcohol is added to the electrolyte, the impurities precipitate from the solution as amorphous arsenato antimonite phase. Results show that Fe, Sb, and As are removed from the copper electrolyte by 75.2, 96.9 and 99.8%,... 

We determined the mechanism of mechanochemical synthesis of fluorapatite from CaO, CaF2 and P2O5 by characterisation of the intermediate compounds. We used atomic absorption spectroscopy, X-ray diffraction, field emission scanning electron microscopy, FTIR spectroscopy and transmission electron microscopy to find the transitional compounds. Investigation of the binary and ternary powder mixtures revealed the appearance of H3PO4, Ca(OH)2, Ca2P2O7 and CaCO3 as the intermediate compounds. At early stages of the milling, conversions of P2O5 to H3PO4 and CaO to Ca(OH)2 occurred in the wet atmosphere. Later, a combination of Ca(OH)2 and H3PO4 formed Ca2P2O7 while the unreacted CaO was converted to... 

The presence of impurities in the copper electrolyte increases the energy consumption of an electrorefining process and contaminates the deposited copper on cathode. The concentration of impurities increases over time making it necessary to remove them from the solution. This research introduces a fast, effective, and simple method to refine the industrial electrolyte from arsenic, iron and antimony by solvent displacement crystallisation technique. In this method, when alcohol is added to the electrolyte, the impurities precipitate from the solution as amorphous arsenato antimonite phase. Results show that Fe, Sb, and As are removed from the copper electrolyte by 75.2, 96.9 and 99.8%,... 

One of the important parts of each transformer is core. It is made from multilayer silicon steel sheets. Silicon steel has high magnetic permission, high electrical resistance and minimum hysterics loss. In different metal forming process, lubrication is done for reducing friction effects. In this research, effect of 3 different type lubricants, mineral material (castor oil), organic material (glycerol), and semi organic material (paraffin) with and without additive (graphite) is investigated. Also, effect of 2 industrial lubricants (suds and motor oil) is compromised with above lubricants. Results show the best lubricant for second cold rolling of silicon steel is semi organic (paraffin)... 

Nowadays, genetic disorders, like cancer and birth defects, are a great threat to human life. Since the first noticing of these types of diseases, many efforts have been made and researches performed in order to recognize them and find a cure for them. These disorders affect genes and they appear as abnormal traits in a genetic organism. In order to recognize abnormal genes, we need to predict splice sites in a DNA signal; then, we can process the genetic codes between two continuous splice sites and analyze the trait that it represents. In addition to abnormal genes and their consequent disorders, we can also identify other normal human traits like physical and mental features. So the... 

In this paper, we propose a novel method for irregularity detection. Previous researches solve this problem as a One-Class Classification (OCC) task where they train a reference model on all of the available samples. Then, they consider a test sample as an anomaly if it has a diversion from the reference model. Generative Adversarial Networks (GANs) have achieved the most promising results for OCC while implementing and training such networks, especially for the OCC task, is a cumbersome and computationally expensive procedure. To cope with the mentioned challenges, we present a simple but effective method to solve the irregularity detection as a binary classification task in order to make...