Sharif Digital Repository

From the beginning of current decade, ride souring in two sided platforms started its activities in Iran and after few years could reach to 10 billion Tomans turnover per year. Now a day Ride sourcing has more than 30 million users in Iran. These days there are more than 5 million price checks in ride sourcing mobile applications from passenger side but, only in half of them passengers and drivers get match. In this situation, one of the biggest challenges of ride sourcing companies is driver’s acceptance rate. Improving acceptance rate could make market bigger, increase utilization and driver satisfaction rate. According to explained need, this study with cooperating of the ride sourcing... 

The main question of this thesis is if and to what extent does the Social Security retirement benefits cause early retirement. This is important because the more individuals are willing to retire earlier, the larger are the Social Security liabilities to pay the retirement benefts, and also it means that more people are leaving the labor force, hence a lower labor force participation. The research was conducted on a sample of men extracted from the Social Security Or-ganization data sets, employing Option Value and Peak Value models to estiamte a binary choice model. The results indicate that Social Security (in the form of retirement benefits) have a significant effect on retirement ... 

With regard to recent progress in decreasing of operating temperature of Solid Oxide Fuel Cell (SOFC), metallic interconnect use widely than ceramic interconnect. Metallic interconnect have interested due to their low cost, easy fabrication and high electronic and thermal conductivity.oxidation resistance of metals is big challenge, because of low conductivity of formed oxide layers that led to increasing of electrical conductivity. Ferritic stainless steel is among the most thriving candidate alloy because of BCC structure that its coefficient of temperature expansion is close to that of other SOFC. Nonetheless, the increase of electrical resistance over the time and the evaporation of... 

Dynamic response of structures, against ground motion, is one of the most important issues in earthquake engineering. A variety of approaches and apparatus have been developed for this purpose. One of these equipments is metallic dampers. Such apparatuses provide damping, accompanied with reasonably strong lateral stiffness; hence, they are named as “Added Damping And Stiffness” (ADAS). The present study aims to evaluate the performance of a common metal damper consisted of triangular metal plates known as “Triangular Added Damping And Stiffness” (TADAS). In this investigation, the performance of TADAS, in an eight story irregular in plan steel structure, is extensively considered. A 3-D... 

The amount of water entering the dam is one of the types of information that has a direct impact on how to plan the discharge and storage of the dam's water supply. Given the precise input streamflow predictions of the next few days, the corresponding authorities can better manage the amount of water that should remain in the storage in the days to come. In this regard, it is no longer necessary to release huge amounts of stored water due to the lack of information on the volume of water entering. Consequently, the volume of water stored in the reservoir, increases. Also, the probability of occurrence of potential hazards such as dam overflow is prevented.Over the last few years, due to the... 

Art is one of the most dynamic and turbulent areas of human life; Where the artist sees his work as creation and every moment puts a new curtain in front of man. But these artistic creations do not all meet the same fate. Some make noise; But they pass very soon and do not leave a trace of themselves in anyone's mind and heart. Some others capture many lives and remain in the historical memory of people. What is the secret of this difference? To answer this question, the current research focuses on the field of music. We want to answer the question of how some innovations in the field of music fit in the mind of the audience and some of them disappear in a short period of time and are... 

Saline and fresh water lakes comprise a high proportion of the surface water resources and take effects from climate, hydrological, geomorphological changes and human activities in their basins. Variation in area of lakes causes changes in weather and local climate of their basins. Due to high environmental value of lakes and their particular effects on the ecosystem of the region, they have been always center of attention. Lake Urmia as the greatest lake in IRAN and the second largest saline lake in the world always has been considered by many researchers. In recent years Lake Urmia has had many changes such as decrease in area and level. Various factors such as climate change, periodic... 

The problem of inferring a graph from a set of graph signals over it plays a crucial role in the field of Graph Signal Processing (GSP). When provided with a graph that best models the structure of data, the GSP algorithms can offer high data processing capability. However, a meaningful graph of data is not always available, hence in some applications, the graph needs to be learned from the data itself. When the data is corrupted and missing, this task becomes even more challenging. In this paper, we present a graph learning algorithm that is capable of learning the underlying structure of data from an incomplete and noisy dataset of graph signals. We propose an algorithm that jointly... 

Seismic resistant structural systems or lateral load-bearing systems must enjoy adequate resistance and hardness against lateral forces and displacements in addition to resisting large deformations to absorb and dissipate energy. Since Iran is located in a seismic area and almost all metropolises of Iran are located in the vicinity of faults, it is critically important to pay close attention to development and application of efficient seismic systems in the constructional system of Iran. The HKB (Hat Knee Bracing) system is a lateral load-bearing system, the construction of which is inspired from divergent bracing systems. In other words, as in... 

In this research, coating with polymer solution was considered for improve the surface adhesion of natural jute fibers with polymer matrix. This coating was performed by two polymers, polyurethane and polystyrene, in order to create compatibility between natural fibers and unsaturated polyester resin. Impregnation and coating of fibers were done by dissolving these polymers in a suitable solvent and creating a thin coating on the fibers. 2%, 5% and 10% solutions of each polymer were prepared for impregnating fibers and the pultrusion process of the resulting fibers was performed using unsaturated polyester resin. The polyurethane were not compatible with jute fibers and caused a loss of... 

The poor economic performance of natural resource abundant countries has been studied for a long time and in order to alleviate this problem some different solutions are suggested by economists. One stream among these solutions are those focusing on the distribution mechanism of natural resource revenues and the ownership of these resources. In this study, it is intended to address the effect of change in the ownership of natural resources on politicians’ behavior and people welfare by using political economy approach. Also the optimal share of people from natural resources as a function of political and economic institutions is discussed. In this study, it is shown theoretically that under... 

Articular cartilage is devoid of blood vessels, lymphatics, and nerves which gives it a very limited intrinsic healing and repair capabilities. Being under constant harsh biomechanical environment, makes maintaining the health of articular cartilage a vital principle in having healthy joints. Tissue engineering as a method for regeneration of damaged tissue have attracted a lot of attention. Articular cartilage engineered scaffolds act as a macro scale drug delivery system which in addition to having a good mechanical properties similar to that of cartilage tissue, have to provide a highly porous environment for cell migration and proliferation. The aim of this study is to fabricate a drug... 

In computational mechanic, paying attention to new methods of problem solving is very important. These approaches can offer more desirable results than the standard finite element method. The extended finite element method (X-FEM) is one of them, which is applied in modeling of discontinuities, singularities, crack propagation and etc. In this method, we do not need to align the element edge with the boundary of discontinuity. It means that the elements can be cut by interface (enriched elements) in the discontinuity boundary. One of the difficulties in (X-FEM) is blending elements, which happens in elements that are blended to enriched element that can decrease the convergence rate. The... 

this research aims to identify interests, goals, and structures which involve privatization. The importance of this research is that the root of numerous firms' inefficiency after privatization lies in the privatization process. The goals of privatizing firms are to improve the efficiency of privatized firms, maintain employment levels, and finally raise funds from privatizing public firms. It could be some conflicts between these goals. On the other hand, managers of public firms will resist privatizing these firms, because they will see their job situation and future in danger. Also, the privatization organization is one of the economic ministry’s subsets which has not enough power and... 

The present study is aimed at the development of a novel approach based on the magnetically improvement of DNA-directed immobilization to prepare a highly efficient sensor for prostate diagnosis. The novelty of this work is in the use of antibody conjugated magnetic nanoparticles via DDI. DNA-modified magnetic nanoparticles are added in solution to capture DNA-conjugated, fluorescently-labeled immunocomplexes formed in solution free of steric constraints. The DDI-based nanoconstructs are then concentrated and immobilized using a magnetic field. Compared to a process in which the immunocomplex directly forms on the sensing surface, the proposed approach provides higher mass transfer and lower... 

Toxic flow occurs when a trader with confidential information trades with a market maker without that information. The trade price is such that the market maker is obliged to provide the desired liquidity by taking the risk of loss for the order. The PIN (Probability of Informed Trading) is widely used to calculate the amount of toxic flow in a market and evaluate the market condition in terms of informed trading. However, Easley et al. (2012a) propose a new alternative method based on high-frequency data and daily orders called VPIN (Volume-Synchronized Probability of Informed Trading), and we apply it in the Iran stock market. This method can give the market makers the ability to predict... 

A new structure of implantable neural recording microsystem base on multiple valued logic (MVL) has been proposed. MVL is a new idea for reduction of occupied area and the power consumption of microelectronic. In another side, in implantable microsystems , occupied area and power consumption by this type of micro systems is a challenging problem in this field. Therefore, the problem of power consumption and occupied area can introduce as a prime stage of suggested microsystem completed design of convertor of analog to digital in usage of multiple level in this micro system worked. Design of convertor of analog to digital is a convertor of quaternary successive approximation. And also,... 

In this thesis, combustion of liquid fuel spray under the condition of hot and diluted oxidizer, has been investigated. To this end, a novel type laboratory-scale test rig was designed to study the physics governing the MILD-Spray combustion conditions with an applied approach. The underlined test rig eliminates the operational problems of its predecessor test stands and is used for a heavier fuel with much more complex chemical composition (kerosene). The test section is axially symmetrical, in which the fuel is injected by a pressure-swirl atomizer in the direction of hot and diluted co-flowing air. With the use of the aforesaid test rig, the effect of variables such as oxygen...