Sharif Digital Repository

Transportation systems have been impressed the humankind societies in an astonishing way. However, there are some weak points that have been accompanied with them. In order to decrease these effects, some strategies such as Transportation Demand Management (TDM) methods have been proposed in some few literatures. In this study, regarding increasing women’s role in urban trips and also some gender based differences; the effects of pricing have been applied as a management method through a Logit Model. Results show that using dummy gender based values would lead to more reliable consequences rather than some separated models with insufficient information. Moreover, it was concluded that women... 

Samples of the V2O5 catalysts supported on nanostructures of TiO2 and γ-Al2O3 were synthesized via hydrothermal method for the oxidative dehydrogenation of propane (ODHP) to propylene. The TiO2 support was utilized in both commercial microstructures and prepared nanostructures from their corresponding salts. Furthermore,the γ-Al2O3 was also prepared from two novel methods. Moreover, the vanadium catalysts supported on hybrid TiO2 and γ-Al2O3 were prepared. The performances of the prepared catalysts were subsequently examined in a fixed-bed reactor. The main products were propylene, ethylene and COx.The vanadium catalyst over TiO2 and γ-Al2O3 had the best performance under the reactor test... 

In recent years, requirement engineering and goal modeling have gained more attention among different organisations. Therefore, different methods have been designed to discover stakeholders’ requirements and translate them into process and organizational goals. Various goal models have been introduced to represent these goals and their relations towards each other. Still, these methods are manual representations of different process scenarios and do not relate to the actual behavior. In 2014, Map Miner Method (MMM) was introduced to discover intentional process models from event logs. MMM uses Hidden Markov Model (HMM) as a means to represent the process as a map model of strategies and... 

Recommending routes to city taxis in order to improve their performance in finding passengers can reduce traffic, pollution and waiting time for passengers, as well as this, increasing the efficiency of taxis can increase their income. In this study, by analyzing trajectory data obtained from 536 taxis in San Francisco over a period of one month, we generated networks of cells, each of which has time-dependent characteristics such as the probability of finding a passenger, the capacity of each cell, or the amount of demand exists is in the cell and the average speed of passing through that cell. also, the connections between these cells in order to make more use of the experiences of taxi... 

The purpose of the present study is to develop neural network estimation method for hybrid or panel data which have a combination of two cross-sectional and time series structures and because of the features of both structures, their use in different sciences offers many advantages; and the analytical methods for this data structure are also different from other one-dimensional structures, so different and specific regression models are presented for this data structure. However, in the artificial neural network method, modeling the development for this data structure is neglected, so in the present study, using the concepts of panel regression methods and their application to the... 

In this project the energy of rotational barrier of C-N bond in 2-cyanoethyl piperidine-1-carbodithioate has been studied by using Dynamic Nuclear Magnetic Resonance spectroscopy. Spectra were taken at various temperatures in two different solvent; acetone and chloroform. For simulation of line-shape broadening SpinWorks software was used. This with two interfaces made possible simulation with two band-shape simulator programs; DNMR and MEXICO. The rate constants obtained from simulations were used for calculation of thermodynamic activation parameters (ΔG#. ΔH#. ΔS# and Ea#). The computational calculations were done by using Gaussian03 in several level and basis sets that are in good... 

The focus of this project was on gaining the knowledge of design characteristics and manufacturing of a hydraulic servo valve. Hence, in the first stage, the model of the valve was considered. After investigating the important parameters which influence the performance of the valve, the effect of each parameter on the valve's efficiency was examined. One of the most important characteristics of the valve is the amount of lapping between the spool and sleeve. Numerical analysis was done and all the characteristic curves were elicited. Equations governing the dynamics of the plant including a servo valve, servo actuator and dynamic model of the turbine and waterway were presented. Then the... 

A mathematical model was developed to assess thermomechanical behavior of work rolls during warm rolling processes of AA2017. A combined finite element analysis-slab method was first developed to determine thermal and mechanical responses of the strip being rolled under steady-state conditions; Then, the calculated roll pressure and temperature field were utilized as the governing boundary conditions for the thermomechanical problem of the work roll. Finally, the thermomechanical stresses within the work rolls were predicted by a thermoelastic finite element approach. The results indicate that, in warm strip rolling, thermal and mechanical stresses developed in the work rolls are comparable.... 

This thesis contains four chapters. In first chapter the role of water in organic reactions as a ecofriendly solvent, computational chemistry and dynamic nuclear magnetic resonance were studied. In the second chapter synthesis of new 4-hydroxy pyrrole derivatives in water were reported. For the synthesis of these compounds arylglyoxal derivatives, 1,3-dicarbonyl compounds and ammonium acetate were used. The reaction conditions are very mild. The third chapter contains the synthesis of new (4 or 5)-Aryl-2-aryloeil-(1H)-imidazole compounds in aqueous media. We also investigated the tauto-isomerisation of isomeric imidazoles during this reaction using DNMR technique. In forth chapter a... 

As technology develops, the need of instruments which could be used for improving the rate and accuracy of the manufacturing increases. This makes the robots inevitable to use in most industries. Among the robots, cable-driven robots have special characteristics that increase the tendency of using them.Multi-body cable-driven robots are novel type of cable-driven robots that have advantages compared to single-body ones. Capability of use in rehabilitation applications, in which the different parts of human body have to move separately, is one of the advantages of multi-body cable-driven robots.The first aim of this thesis is to extend the tensionable workspace concept for multi-body... 

We obtain a large deviation principle describing the small time asymptotics of the solution of a stochastic evolution equation with multiplicative noise. Our assumptions are a condition on the linear drift operator that is satisfied by generators of analytic semigroups and Lipschitz continuity of the nonlinear coefficient functions. Methods originally used by Peszat.
For the small noise asymptotics problem are adapted to solve the small time asymptotics problem. The results obtained in this way improve on some results of Zhang  

Increasing need for energy, non-renewable fossil resources and environmental pollution persuaded investigators to offer hydrogen as a clean alternative fuel. One of efficient methods for producing hydrogen is the ammonia catalytic cracking reaction. The present work the most to caused on the simulation of both 1D and 2D in an assisted-membrane tapered fluidized bed reactor. In 1D simulation several tubes of membrane placed inside the reactor, but in the case of 2D simulation two membrane tubes on the reactor walls were used. In 1D and 2D simulations the compartmental and Eulerian-Eulerian approach were used, respectively. The simulation results indicate that in a constant static bed height,...