Sharif Digital Repository

A method based on direct immersion solid-phase microextraction (DI-SPME) coupled with high performance liquid chromatography combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection (HPLC-PIF-FD) was developed to extract three pyrethroid insecticides, i.e. cyfluthrin, cypermethrin, and flumethrin from water samples. A sol-gel based coating fiber using 3-(trimethoxysilyl propyl) amine as precursor was prepared and used for the extraction of the pyrethroids from groundwater samples. A post-column photochemical reactor was designed and constructed for the derivatization of these environmentally important pollutants to increase their fluorescence... 

Nowadays users of the Web are encouraged to generate content on the Web by themselves. Weblogs are the most popular tools to do this. In fact Weblogs are one kind of social networks and they are one of the most important components in Web 2.0. Blogs are often situated within a Blog community of similar interest. These communities can be a useful way for readers to access space slice of millions of Weblogs. In this paper we introduce a new algorithm to infer communities based on their link structure. This algorithm uses self organizing maps to identify communities among Weblogs. The link pattern of each Weblog is the input for SOM. © 2007 IADIS  

Reflection appears as a layer that partly covers the original image. This phenomenon may cause failure in extracting information from images of reflecting objects. This work presents an automated technique for determining of reflection area as well as its severity to define reliability of extracted information. This is done by analyzing histogram and objects found in the image. We present a strong detector based on combining the results of these two procedures. We presented new reflection detection algorithm and a new method to find a good threshold value for converting any image into a binary image. The average reflection detection accuracy of the proposed algorithm is more than 95% for... 

A new approach to evaluation of the data hiding capacity of digital video is presented in this paper. The paper reconsiders the conventional capacity estimation algorithms, in which the video signal is taken as a sequence of still images, that result in an exaggerated upper bound of hiding capacity or a much higher value than the actual embedding capacity. The proposed method for the capacity estimation is based on the human visual model in temporal domain, which leads to a more realistic, tighter bound for video capacity. In this method, according to temporal characteristic of every frame, a visibility based coefficient is extracted that is used to determine the hiding capacity. The maximum... 

A headspace solid-phase dynamic extraction (HS-SPDE) technique was developed by the use of polypyrrole (PPy) sorbent, electropolymerized inside the surface of a needle, as a possible alternative to solid-phase microextraction (SPME). Thermal desorption was subsequently, employed to transfer the extracted analytes into the injection port of a gas chromatography-mass spectrometry (GC-MS). The PPy sorbent including polypyrrole-dodecyl sulfate (PPy-DS) was deposited on the interior surface of a stainless steel needle from the corresponding aqueous electrolyte by applying a constant deposition potential. The homogeneity and the porous surface structure of the coating were examined using the... 

Solar pond is a type of solar collector that stores solar energy in the form of heat. The solar pond can be used as a low-temperature heat source for electricity generation. In this paper, to find the most suitable power cycle for power generation from the solar pond, the performance of the Organic Rankine Cycle (ORC), Trilateral Flash Cycle (TFC) and their modified forms with an open feed liquid heater and an internal heat exchanger for different working fluids was investigated. Water was considered as the heat transfer fluid which transfers the stored heat from the solar pond to the working fluid of the cycle. The results indicate that in all cases, the energy and exergy efficiency of the... 

A novel amino-functionalized polymer was synthesized using 3-(trimethoxysilyl) propyl amine (TMSPA) as precursor and hydroxy-terminated polydimethylsiloxane (OH-PDMS) by sol-gel technology and coated on fused-silica fiber. The synthesis was designed in a way to impart polar moiety into the coating network. The scanning electron microscopy (SEM) images of this new coating showed the homogeneity and the porous surface structure of the film. The efficiency of new coating was investigated for headspace solid-phase microextraction (SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Effect of different... 

A head-space solid-phase microextraction (HS-SPME) method coupled to GC-MS was developed to extract fentanyl from human plasma. The protein binding was reduced by acidification and, eventually, the sample was deproteinized with trichloroacetic acid. The parameters influencing adsorption (extraction time, temperature, pH and salt addition) and desorption (desorption time and temperature) of the analyte on the fibre were investigated and validated for method development. The developed method proved to be rapid, simple, easy and inexpensive and offers high sensitivity and reproducibility. Linear range was obtained from 0.1 ng/ml to 2 μg/ml. The limit of detection was 0.03 ng/ml while an... 

A new method for digital video watermarking is presented in this paper. For data embedding we use 3-D ridgelet domain introduced by Helbert. The redundancy of this transform is substantial, so extraction of the hidden data is impossible in this domain. To overcome this problem, we introduce a modified ridgelet transform with little redundancy, and embed watermark in this domain. Experimental results show that this scheme is robust against collusion attack, frame cropping, frame swapping, frame dropping, noise attack and the MJPEG (Motion JPEG) compression  

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of...