Sharif Digital Repository

As of late quantum calculus is broadly utilized in different parts of mathematics. Uniquely, the hypothesis of univalent functions can be newly portrayed by utilizing q-calculus. In this paper, we utilize our recently presented symmetric p,q-number m p,q to characterize new symmetric p,q-derivative D p,q of analytic function f in the open unit disk U. Utilizing D p,q, we introduce new class of analytic star-like functions and examine some fascinating results. © 2021 Khalid Akbar et al  

As of late quantum calculus is broadly utilized in different parts of mathematics. Uniquely, the hypothesis of univalent functions can be newly portrayed by utilizing q-calculus. In this paper, we utilize our recently presented symmetric p,q-number m p,q to characterize new symmetric p,q-derivative D p,q of analytic function f in the open unit disk U. Utilizing D p,q, we introduce new class of analytic star-like functions and examine some fascinating results. © 2021 Khalid Akbar et al  

The bonding temperature is an important parameter for optimization of the Transient Liquid Phase (TLP) bonding process in order to achieve a sound joint with good mechanical properties. However, the bonding temperature used can also be restricted by the microstructural stability of the base metal. In this study, the effect of bonding temperature (1050-1200 °C) on the joint microstructure and mechanical properties was studied for TLP bonding of FSX-414 superalloy using MBF-80 interlayer with thickness of 50 μm. Increasing bonding temperature from 1050 to 1150 °C caused reduction in the time required for complete isothermal solidification in agreement with models based on the diffusion induced... 

Co-based FSX-414 superalloy is especially used for first-stage nozzles of gas turbines. Transient liquid phase (TLP) bonding has potential as repair process for these nozzles. In this study, homogenization of TLP-bonded FSX-414 superalloy at optimum bonding condition (1150 °C/5 min) was conducted at 1175, 1200, and 1225 °C for 1, 3, and 6 h. Homogenization at 1175 °C/1 h had no effect on removing the diffusion-affected zone (DAZ) phases. Increasing the time to 6 h was effective in removing DAZ phases and boride phases formed due to liquefaction, but compositional homogenization was not complete. Homogenization at 1200 °C for 1 h caused boride phases to form adjacent to the joint and in the... 

This paper focuses on characterization of intervertebral disc behavior upon fatigue stress. It consists in in-vitro experiments to measure intervertebral disc deformation with regard to forces applied to produce fatigues test. In this paper, a system modeling based non-invasive method to assess back pain is proposed which may be used for designing of prediction model to predict the failure of intervertebral disc (IVD) experiencing fatigue loading. An artificial compression fracture was simulated in the lower level of vertebra followed by a poly(methyl methacrylate) (PMMA) bone cement injection. Fatigue loading was applied on the specimens and the load was incrementally increased form 650 N... 

Providing home hemodialysis (HHD) therapy is a complex process that not only requires the use of a complex technology but also involves a diverse group of stakeholders, and each stakeholder has their requirements and may not share a common interest. Bringing them together will require the alignment of their interests. A process management perspective can help to accomplish the alignment of their interests. To align their interests, it is crucial to identify interest groups and understand their interests. The main objective of this paper is to identify the stakeholders and represents their interests as a list of requirements in the HHD process. An extensive literature review has been carried... 

This study describes some epidemiological and patho-physiological aspects of Trypanosoma evansi (causative agent of “surra”) infection in camels (n=255) and Nili Ravi buffaloes (n=233). Clinical ailments like fever, shivering, edema of pads and urticarial swelling were observed in infected animals. Overall prevalence of T. evansi infection in buffaloes was 9.01 and 15.12% based on blood smear examination and PCR, respectively, while in camels, the prevalence was 10.58 and 15.29% based on smear examination and PCR, respectively. Results on epidemiological data did not indicate significant association of different factors of hosts with prevalence of T. evansi. Hematological parameters... 

The dynamics of the nanofluid flow between two plates that are placed parallel to each other is of huge interest due to its numerous applications in different industries. Keeping in view the significance of such flow, investigation of the heat transfer in the Cu-H2O nanofluid is conducted between parallel rotating plates. For more significant results of the study, the squeezing effects are incorporated over the plates that are electrically conducting. The nondimensional flow model is then treated analytically (VPM), and the results are sketched against the preeminent flow parameters. The remarkable heat transfer in the nanofluid is noticed against the Eckert and Prandtl numbers, whereas the... 

The dynamics of the nanofluid flow between two plates that are placed parallel to each other is of huge interest due to its numerous applications in different industries. Keeping in view the significance of such flow, investigation of the heat transfer in the Cu-H2O nanofluid is conducted between parallel rotating plates. For more significant results of the study, the squeezing effects are incorporated over the plates that are electrically conducting. The nondimensional flow model is then treated analytically (VPM), and the results are sketched against the preeminent flow parameters. The remarkable heat transfer in the nanofluid is noticed against the Eckert and Prandtl numbers, whereas the... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

This study focuses on a forward looking approach in which deep eutectic solvents (DESs), a new class of designer solvents, were impregnated into micro porous polyvinylidene fluoride (PVDF) membrane for the separation of CO2 from CH4. Three types of DESs were prepared by mixing and heating of hydrogen bond acceptor (choline chloride) with either malic acid, tartaric acid or oxalic acid as hydrogen bond donor. The Fourier transform infrared spectroscopy confirmed the hydrogen bond interactions in the resulting DES. Thermal gravimetric analysis (TGA) was used to evaluate the thermal stability of the prepared membranes. The DES based supported liquid membranes were investigated systematically to... 

The microfluidic device, known simply as microfluidics, is an emerging technology that has become a significant tool for pharmaceutical businesses to process and analyze materials for developing, optimizing, testing, and delivering various drugs in advanced nanocarriers. Technically, microfluidics is a technique to handle small solution volumes (nanoliters to picoliters) in microchambers of different geometries and dimensions ranging from a few nanometers to hundreds of micrometers. Each year, many pharmaceutical drug delivery systems have failed clinical translation because of scale-up problems. Now, scientists are trying to find some suitable alternatives and more robust methodologies to... 

Nonlinear optical (NLO) materials are essential components in modern photonics and optical devices due to their ability to generate new frequencies through the nonlinear interaction with intense light. Synthesizing porphyrin-based NLO materials is complex and challenging, requiring specialized techniques to achieve high purity and yield. Controlling chromophore orientation and optimizing nonlinear optical properties are key difficulties that demand interdisciplinary efforts for practical photonics and optical applications. In the present study by using z-scan technique some of non-linear optical (NLO) parameters includingthird order NLO susceptibility (χ3), and molecular second... 

Novel PVA/PEG cross-linked membranes were prepared with (0–20 wt. %) of silica nanoparticles. The presence of both the polymers and additive was confirmed by FTIR analysis. The thermal properties of the membranes were analyzed by TGA and DSC analysis. The morphological and mechanical properties of the membranes were studied by SEM analysis and tensile testing, respectively. The gas permeation performances of the membranes were examined using state-of-the-art gas permeability cell. It was found that permeability of all the gases increased with the increase of silica loading, whereas ideal selectivity of carbon dioxide with respect to nitrogen and methane increased up to 10 wt. % loading and... 

Rare earth elements (REEs) are becoming significant due to their huge applications in many industries, large-scale mining and refining activities. Increasing usage of such metals pose negative environmental impacts. In this research ICP-MS has been used to analyze soil samples collected from former ex-mining areas in the depths of 0–20 cm, 21–40 cm, and 41–60 cm of residential, mining, natural, and industrial areas of Perak. Principal component analysis (PCA) revealed that soil samples taken from different mining, industrial, residential, and natural areas are separated into four clusters. It was observed that REEs were abundant in most of the samples from mining areas. Concentration of the... 

The recent work investigates the heat transfer attributes in the flow of engine oil which comprises of nano-particles such as Cu and TiO2. The performance of Copper and Titanium oxide is over looked in the flow of engine oil. The energy equation is amended by the features of thermal radiation, viscous dissipation, and heat generation. The mathematical model signifies the porosity, entropy generation and moving flat horizontal surface with the non-uniform stretching velocity. Quasi-linearization, which is a persuasive numerical technique to solve the complex coupled differential equations, is used to acquire the numerical solution of the problem. Flow and heat transfer aspects of Cu–TiO2 in... 

The intestinal tract microbiota influences many aspects of the dietary components on colon health and during enteric infections, thus, playing a pivotal role in the colon health. Therefore, the eugenol (EU) nano-emulsion effective concentration reported in our previous study against cancer cells should be explored for safety against beneficial microbes. We evaluated the sensitivity of Bifidobacterium breve and B. adolescentis against EU-loaded nano-emulsions at 0, 300, 600 and 900 µm, which were effective against colon and liver cancer cells. Both B. breve and B. adolescentis showed comparable growth ranges to the control group at 300 and 600 µm, as evident from the plate count experimental...