Sharif Digital Repository

In this paper, the effect of increasing the number of layers on improving the thermal performance of microchannel heat sinks is studied. In this way, both numerical and analytical methods are utilized. The analytical method is based on the porous medium assumption. Here, the modified Darcy equation and the energy balance equations are used. The method has led to an analytical expression presenting the average dimensionless temperature field in the multilayer microchannel heat sink. The effects of different parameters such as aspect ratio, porosity, channel width, and the solid properties on the thermal resistance are described. The results for single layer and multilayer heat sinks are... 

This article proposes a multi-objective goal programming based approach with two objectives of maximizing the reliability and minimizing the placement cost of Phasor Measurement Units (PMUs) for full observability in power systems. The weighted sum goal programming formulation incorporates the reliability of individual PMUs and finds a placement to resolve the conflicting objectives of minimum number of PMUs cost-wise and maximum level of system-wide reliability. This multi-objective problem is formulated as a nonlinear goal programming model in which weights are associated with the objectives. The model is solved for several weight scenarios for the IEEE 14, 30, 57 and 118 bus test systems.... 

In the present research a numerical investigation has been made to evaluate the results of analytical approach in the analysis of micro channel heat sink (MCHS) which is increasingly used in the cooling of high heat dissipating electronic devices. In this regard the effects of geometrical and flow parameters affecting the absolute thermal resistance of MCHS have been analyzed. The effect of using different fluids in the value of the thermal resistance is considered as well. The accuracy of analytical method in predicting heat transfer and fluid flow regimes in micro channel is checked in comparison with numerical method. The effects of hydraulic and thermal entrance lengths of these systems... 

One of the significant methods to design airplanes with high capabilities is taking advantage of variable shape structures to improve flight efficiency. In present article the effect of a variable shape wing on an ultra light flyer has been considered. Very low weight of this kind of airplane limits the applicability of control surfaces to attain appropriate maneuvers. To overcome this problem, implementation of a variable shape structure using SMA actuators has been proposed. For simulation, deformed shape of wings has been calculated with finite element method; this data has been used to determine aerodynamic coefficients using computational fluid dynamic (CFD) and finally leads to flight... 

Applying flexible variable shape control surfaces (wing and elevator) structures is a way to increase efficiency and maneuverability of the planes, which is recently under research. In this paper, modeling of the flight of an unmanned ultra light plane is discussed. The modeling is done based on a real ultra light plane presented recently. To increase maneuverability of the plane, flexible variable shape structures are designed for the wing and the elevator. In design procedure, having an ultra light plane is considered. The elevator and the wing are used as control surfaces for longitudinal and lateral maneuvers respectively. Shape memory alloys (SMA) are used for reshaping the flexible... 

Mammography is an x-ray-based imaging method to examine breast abnormalities. Since low-energy photons are used in mammography, doses to different organs would depend strongly on the phantom posture and anatomy. Until now, a few studies have been performed on doses delivered to different organs during mammography. However, in none of them, the correct posture of the patient has been considered. In the present study, the effect of accurate patient positioning, on doses to organs in the chest region were investigated through Monte Carlo simulations. The results show the rotation of the phantom head, may affect organ doses up to 60%. Also, ignoring the head in dosimetry calculations changes... 

In this paper a new approach to dynamic optimization of a rough terrain rover is introduced. Since rover wheels traction has a significant role in rover mobility, optimization is based on the minimization of traction at rover wheel-ground interfaces. The method of optimization chosen is Genetic Algorithm (GA) which is a directed random search technique along with the usual optimization based on directional derivatives. GA is a suitable and efficient method of optimization for nonlinear problems. The procedure is applied on a specific rough terrain rover called CEDRA-I Shrimp Rover. The present work resulted in design and manufacturing of the optimized rover called CEDRA-II Shrimp Rover. ©... 

In this paper a new approach to dynamics optimization of rough terrain rovers is introduced. Since rover wheels traction has a significant role in rover mobility, optimization is based on the minimization of traction at rover wheel-ground interfaces. The method of optimization chosen is Genetic Algorithm (GA) which is a directed random search technique along with the usual optimization based on directional derivatives. GA is a suitable and efficient method of optimization for nonlinear problems. The procedure is applied on a specific rough terrain rover called CEDRA-I Shrimp Rover. Dynamical equations are obtained using Kane's method. Finally, the results are verified by modeling of the... 

We carried out molecular dynamics simulations (MD) to investigate the adsorption of calcium chloride (CaCl2) at n-hexane-water interfaces. We also measured the interfacial tensions (IFT) of the selected systems making use of the pendant-drop method. The histograms of hexane, water, and the ions indicate an electrical double layer (EDL) near the interface. The trend of the EDL indicates that chloride anions intend to adsorb to the interface more intrinsically than calcium cations. The measured interfacial width of the n-hexane-water interfaces decreases with the salt concentration. The average densities of the interfacial and bulk aqueous solutions demonstrate density heterogeneity in the... 

We have used molecular dynamics simulation to investigate hydrophilic– hydrophobic interfaces between calcium chloride (CaCl2) aqueous solutions and normal hexane. The results demonstrate the increasing impact of salt concentration on the liquid–liquid interfacial tension, hence, negative adsorption of CaCl2 according to Gibbs adsorption isotherm. Moreover, we calculated the density profiles of hexane, water, and the counter ions. The results reveal an electrical double layer near the interface and the less affinity of calcium cations toward the interface than that of chloride anions. Orientation of water molecules at the studied concentrations may result in developing a positively charged... 

In the present work we obtained a series of NIR luminescent platinum(II) complexes with a pincer N^N^C ligand based on the conjugated {benzoimidazo[1,2-a]pyrazine} system with the [Pt(N^N^C)L]n+ structural motif (L = phosphine, alkynyl or pyridine-type ligands). We have also synthesized two complexes with bidentate phosphines that demonstrate different types of coordination: 1) as chelating ligand (in case of 1,2-bis(diphenylphosphino)benzene), that led to de-coordination of pyridine ring of N^N^C ligand and formation of a [Pt(N^C)dppb]+ complex; 2) as a bridging ligand (in case of bis(diphenylphosphino)methane) between two {Pt(N^N^C)} fragments in a dimeric complex of type... 

The combined action of ultraviolet irradiation and microwave heating onto acetonitrile solution of [Re((Formula presented.))(CO)3(NCMe)]OTf ((Formula presented.) =phenantroline and neocuproine) afforded cis,trans-Re((Formula presented.))(CO)2(NCMe)2]+ acetonitrile derivatives. Substitution of relatively labile NCMe with a series of aromatic N-donor ligands (pyridine, pyrazine, 4,4’-bipyridine, N-methyl-4,4’-bipyridine) gave a novel family of the diimine cis,trans-[Re((Formula presented.))(CO)2(L)2]+ complexes. Photophysical studies of the obtained compounds in solution revealed unusually high absorption across the visible region and NIR phosphorescence with emission band maxima ranging from... 

A Deza graph with parameters (n, k, b, a) is a k-regular graph with n vertices such that any two of its vertices have b or a common neighbours, where b ≥ a. In this paper we investigate spectra of Deza graphs. In particular, using the eigenvalues of a Deza graph we determine the eigenvalues of its children. Divisible design graphs are significant cases of Deza graphs. Sufficient conditions for Deza graphs to be divisible design graphs are given, a few families of divisible design graphs are presented and their properties are studied. Our special attention goes to the invertibility of the adjacency matrices of Deza graphs. © 2020, © 2020 Informa UK Limited, trading as Taylor & Francis Group  

A Deza graph with parameters (Formula presented.) is a k-regular graph with n vertices such that any two of its vertices have b or a common neighbours, where (Formula presented.). In this paper we investigate spectra of Deza graphs. In particular, using the eigenvalues of a Deza graph we determine the eigenvalues of its children. Divisible design graphs are significant cases of Deza graphs. Sufficient conditions for Deza graphs to be divisible design graphs are given, a few families of divisible design graphs are presented and their properties are studied. Our special attention goes to the invertibility of the adjacency matrices of Deza graphs. © 2020 Informa UK Limited, trading as Taylor &... 

The influence of the addition of the nonionic surfactants C12DMPO, C14DMPO, C10OH, and C10EO5 at concentrations between 10-5 and 10-1 mmol/L to solutions of β-casein (BCS) and β-lactoglobulin (BLG) at a fixed concentration of 10-5 mmol/L on the dilational surface rheology is studied. A maximum in the viscoelasticity modulus |E| occurs at very low surfactant concentrations (10-4 to 10-3 mmol/L) for mixtures of BCS with C12DMPO and C14DMPO and for mixtures of BLG with C10EO5, while for mixture of BCS with C10EO5 the value of |E| only slightly increased. The |E| values... 

The aim of this work was to study the treatment of strong beet sugar wastewater by an upflow anaerobic fixed bed (UAFB) at pilot plant scale. Three fixed bed bioreactors (each 60 L) were filled with standard industrial packing, inoculated with anaerobic culture (chicken manure, cow manure, anaerobic sludge digested from domestic wastewater) and operated at 32-34 °C with 20 h hydraulic retention time (HRT) and influent COD ranging between 2000-8000 mg/L. Under these conditions the maximum efficiency of organic content reduction in the reactor ranged from 75% to 93%. The reactor filled with standard pall rings made of polypropylene with an effective surface area of 206 m2/m3 performed best in... 

Let two coordinate systems, in possession of Alice and Bob, be related to each other by an unknown rotation R∈ SO (3). Alice is to send identical states | ψ⟩ to Bob who will make measurements on the received state and will determine the rotation R. The task of Bob is to estimate these parameters of the rotation R by the best possible measurements. Based on the quantum Fisher information, we show that Greenberger–Horne–Zeilinger (GHZ) states are near optimal states for this task. We show concrete measurements which will allow Bob to determine the rotation R. This shows that GHZ states, as superposition of macroscopically distinct states, are useful in yet another context in quantum...