Sharif Digital Repository

Past earthquakes show that irregular structures have been more vulnerable than their regular counterparts. One of the common types of irregular buildings in urban areas is split-level ones. On the other hand, beam-to-column connections in steel structures are mostly of "semi-rigid" type. In this work, effects of different levels of rigidity of connections, 100%, 75%, 50% and 25%, on the behavior of a number of two-dimensional split-level steel structures, with 1.5 m difference in levels of floors, 2, 3, 5 and 6 bays, and 5, 10 and 15 stories, were studied. All frames were analyzed “with” and “without” considering the P-∆ phenomenon, with two methods, ‘equivalent static load,’ and ‘modal... 

Inherent safety means that the process is naturally safe and the conditions of occurrence of unsafe cases and situations are eliminated from the system so that unsafe conditions can be controlled and prevented from occurrence by means of layers of protection. In general, evaluation of inherent safety may be studied in two different conditions; the first one is associated with the units that are not completely designed and built yet. In the initial steps of developing a process, there is much freedom in the determination of materials, equipment, and designing variables. As soon as the process enters its life cycle, making changes in the process will be very difficult and expensive. Therefore,... 

This study aims to numerically study the penetration process of piezocone (CPTu) in saturated intact clayey soils with emphasis on excess pore-water pressures (EPWPs) generated around the piezocone. It is well agreed in the literature that measurements of pore-water pressure during piezocone penetration tests can play an important role in assessing engineering parameters and characteristics of clays such as undrained shear strength (su) and stress history (overconsolidation ratio, OCR) of the soil. Due to the importance of role of these two parameters in analysis, design and construction in geotechnical projects e.g. slope stability and evaluation of ground settlements induced by... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

FGM sheets with component or grain size gradient in their thickness direction provide mechanical and physical gradient properties through ND direction. FGMs are fabricated by various methods including centrifugal casting, powder metallurgy, PVD and CVD,all of which suffer from some shortcomings such as porosity of the products, low rate and high cost of production and restrictions on mass production. In this study, 2 and 4 layered Al matrix FGM sheets containing SiC and Al2O3 powders were fabricated by laminating method of Accumulative Roll Bonding(ARB). Two approaches of stacking were chosen as accumulative coupled roll bonding (ACRB) and (ASRB) for initial roll bonding and subsequent... 

Particle reinforced aluminum matrix composites have considerable attraction in automotive and aerospace industries due to their special properties as light weight, high ratio of strength/density, improved elastic modulus, low coefficient of thermal expansion and high wear and corrosion resistance. Among the production processes of metal matrix composites, accumulative roll bonding process has particular importance due to producing ultrafine grained composite sheets. However, uncontrolled and undesired agglomeration of particles is the main problem in producing these composites. In this research, the Al2O3 and SiC nanoparticles were electrostatically stabilized against agglomeration by... 

This project examines four alternatives such as pipelines, oil injection wells, LNG & GTL in the purpose of Iran gas utilization. In this Project four strategies using cost/benefit analysis are examined. For this purpose, at first the cost of inlet feed gas per Mmbtu are calculated. Then regarding various scenarios of average world gas prices for the following thirty years, the cost & benefit of any way will be counted. Then with the use of energy security, the project will make energy policy. For this purpose, Shannon indicator will be used as one of the most reliable indicators. Due to the of use this indicator, the popular project will be chosen accordingly as a certain amount of gas the... 

Lipid membranes are fundamental constituents of cell membranes and are now used in lap-on-a-chip technology. Membranes in living cells contain a significant fraction of proteins, which undergo lateral random movements due to thermal fluctuations and shear forces imposed by the solvent fluid. Prominent natural and biotechnological systems where membranes are highly sheared include the plasma membrane of endothelial cells, and membranes used in biosensors for high throughput screening of drug candidates, and in water purification devices. In these systems membrane is in direct contact with the mainstream suspension flow, which is driven by pressure gradients. The efficiency and function of... 

Splitting in ingot cast structures and transverse cracks in continuous cast structures are the main problems of hot rolling of low carbon resulfurized free-cutting (LCRF) steels. Presence of high volume fraction of manganese sulfide inclusions in cast structure increases the risk of alligatoring in hot rolling. Because of high sulfur content of these steels and probability of formation of low melting point phases, minimum level of manganese and maximum level of copper and tin is necessary. Morphology of manganese sulfide is another important factor in hot forming of these steels, which can be controlled by level of deoxidation in steel making. In fact, MnS2 is present in fully killed... 

Based on International Energy Agency studies, achievement of 450 ppm CO2-equivalent emission target in global emission means that the CO2 emissions in 2050 must be reduced to %50 of 2005 level, and this implies that a portfolio of emission reduction policies and strategies need to be exploited through current century.
At the present time, Carbon Capture and Storage (CCS) Technology is a dominant strategy among all the long-term carbon abatement strategies in many countries. Nevertheless, its potential as a climate mitigating option will be proved, only if it is implemented in the countries which are developing at a great pace and taking advantage of fossil fuels in order to afford their... 

Climate change and energy security are key drivers for future energy policy. While energy security has been a pillar of energy policy for about a century, concern about climate change is more recent and is bound to radically change the landscape of energy policy. Policy makers are now under increasing pressure to address these twin challenges: to develop cost-effective policies that will both ensure the security of our energy system and reduce greenhouse gas emissions.
Main Effort in this Project is to construct an integrated model of Iran’s energy system to serve as a policy analysis tool, by which policymakers are able to identify the future effects of a wide range of policies in... 

Dependence of some magnetic properties such as core loss and permeability on temper rolling was studied in this thesis. It is shown that with a proper temper rolling sharper textures are obtained in the electrical steel and the magnetic properties in the longitudinal and traverse directions are improved. By texture analysis, it is shown that because of temper rolling, shear strain on the surface of the sheet is the main factor for abnormal grain growth and shear texture formation on the surface. The result of formation of this texture is enhancement of the {100} intensity and reduction of the {111} intensity, leading to the improvement of the permeability. Temper rolling is always... 

Distributed generation (DG) and its utilization have some benefits and risks for its owner and power network. From owner perspective, benefits of DG include selling energy, reducing costs related to fuel, and other economic benefits. However, there are some risk factors for the owner including risk of supplying fuel, risk of selling generated power, and other risk factors related to establishment of the DG unit. Utilizing risk-reduction tools such as signing agreements for selling power, purchasing fuel, and related economic tools are necessary for risk management of the owners of DG units. The purpose of this thesis is to investigate the economic situation of the DG units and optimize the... 

In software programs, most of the time, there is a chance of error, even though they are tested carefully. Finding error-related pieces of code is one of the most complicated tasks and it can make incorrect results if done manually. Semi-automated and fully-automated methods have been introduced to overcome this issue. The rapid growth of developing smart mobile applications (SMAs) in recent years, competition among the development teams and many other factors have increased the chance of errors and hence, the quality of these applications have reduced. There are two approaches to test SMAs in order to reach a high degree of quality: (1) using existing traditional methods and adapting them... 

Aeroelasticity analysis and prediction of wind turbines sturcture deformations are fundamental parts in their design. Increasing the size of wind turbine blades and development of Mega-watt sized wind turbines have enhanced the importance of these studies. In this study, the aeroelasticity analysis of a wind turbine blade has been done based on flexible multibody dynamics method. For this purpose, the modal approach has been used for modeling blade structure which has been considered as a flexible beam with bending and torsion degrees of freedom. The unsteady vortex lattice method has been used to calculate aerodynamic loads in order to combine with wind turbine blade structure model. Using... 

The ever increasing growth of smart phones and their applications have led to the emergence of various platforms, i.e. online stores, for distributing them among users and providing a way for customers and developers to interact with each other. In recent years, these stores have turned into an important form of software repositories, which brought out new challenges for researchers. One of these challenges is the task of searching for suitable applications and providing simple access to them for users. Pervious work has focused on the relationships between users and applications’ contents. Among the shortcomings of these approaches, is not considering users’ reviews of applications and what... 

The trend of increasing energy intensity in the country, despite awareness of the officials and managers of the need to take action to improve it, is ongoing. Various studies conducted worldwide to improve the productivity of energy. These studies suggest ways for improving energy intensity; suggestions that will never be implemented, because of lack of utility consideration of actors. In this research, in search for energy intensity reduction barriers in the industrial sector of the country, a game theoretical approach has been applied. In this study’s modeling, energy consuming firms as an actor, compete with each other and the government as an important actor in the implementation or... 

Energy efficiency for Iran, which has large reserves of oil and gas but also has a high energy consumption is important because it ensures the country's energy security and saving each energy unit creates energy exports opportunity. Buildings have high energy saving potential; this sector uses about thirty percent of energy consumption (about half the gas and thirty percent of the annual electricity consumption). Households are not motivated in saving energy because government pays energy subsidy. In this research building energy consumption (in Tehran) modeled by bottom up approach. Then the effect of economic incentive tools such as subsidy, loan and tax on motivation in energy saving... 

Client applications are often developed with the help of software frameworks in order to reduce the development costs and to increase the software quality. However, frameworks may evolve to add new features or to fix bugs, and thus, their APIs may change at the same time. Nevertheless, these API changes can cause the client applications to not work properly. New frameworks typically use the deprecation mechanism to reduce this effect, but their documents often do not provide sufficient information. Consequently, deprecated APIs usages remain unresolved in client applications. To tackle this issue, we introduce ARFES (Automated Recommender of Framework Evolution Solutions) that provides...