Sharif Digital Repository

In this article we investigate exact cylindrically symmetric solutions to the modified Einstein field equations in the braneworld gravity scenarios. It is shown that for the special choice of the equation of state 2U+P=0 for the dark energy and dark pressure, the solutions found could be considered formally as solutions of the Einstein-Maxwell equations in 4-D general relativity. © 2005 The American Physical Society  

In this research, the pressureless sintering of ZrB 2 composites were studied to obtain the highest densification and investigate the effects of TiC (2–10% wt) and graphite (1–2% wt) additives on the sinterability. The results showed that by adding TiC, the porosity and water absorption of the samples decreased, resulting in an increase in the density of the samples up to ~98% of the theoretical density. The addition of graphite and TiC reduced the surface oxide layers, improved the density and prevented the grain growth. The graphite additive reacted with B 2 O 3 and ZrO 2 and allowed the system to achieve a complete densification at 2000 °C. Both TiC and graphite additives were completely... 

The combined effects of SiC and carbon additives on the densification, structure and characteristics of pressureless sintered ZrB2-SiC ceramic composites were studied. The ZrB2-SiC (1-10wt%) composite powders were mixed by 1-2wt% carbon. The prepared powder mixtures were then cold-consolidated and sintered in argon environment in the temperature range of 1800-2100°C for 2h. The constituted phases and microstructural evolutions were studied using x-ray diffraction and scanning electron microscope equipped with an energy dispersive x-ray detector. The obtained results concluded that the densification was increased by extending the sintering time and also by prior holding... 

We present an analytical method to obtain an expression for electron transmission through an array of disordered nanorings (ADNRs) sandwiched between two semi-infinite metallic leads in different lead-ring coupling strengths. Our approach is based on the nearest-neighbor tight-binding approximation and transfer matrix method. First, we derive an analytical formula for electron transmission across the system. Next, we apply our approach to study of the electron transport in a perfect double nanoring (PDNR) and design a NOR gate using the magnetic fluxes inputs. The conductance, current-voltage characteristics and threshold voltage of the system are calculated in the weak and strong coupling... 

Epoxy-clay nanocomposites were prepared using silane modified montmorillonite. The clay was first purified using a 1-inch hydrocyclon apparatus. The purified clay was modified with various amounts of (γ)-3-aminopropyltrimethoxysilane as a modifier. The synthesized organoclay was mixed and swollen by a mixture of epoxy resin and stoichiometric amount of curing agent at different temperature, mixing time and agitation. Finally, the compounds were cured in an oven at 90 °C for 2 h. The nanostructure materials were characterized using X-ray diffraction and transmission electron microscopy. The X-ray diffraction patterns showed that the impurities and large particles (greater than 5 microns) are... 

A nanoscale logic NOR gate has been theoretically designed by magnetic flux inputs in a Z-shaped graphene nanoribbon composed of an armchair ribbon device sandwiched between two semi-infinite metallic zigzag ribbon leads. The calculations are based on the tight-binding model and iterative Green's function method, in which the conductance as well as current-voltage characteristics of the nanosystem are calculated, numerically. We show that the current and conductance are highly sensitive to both the magnetic fluxes subject to the device and the size of the system. Our results may have important applications for building blocks in the nanoelectronic devices based on graphene nanoribbons  

This work deals with the preparation of epoxy-clay nanocomposites. The results show that the mechanical properties of nanocomposites depend on their compatibility, the epoxy resin used and the purity of the nanoclay. The used bentonite was purified and the effects of the organoclay synthesis and various additives on its characteristics were evaluated. X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM) were used to analyze the microstructure and the phase composition of the nanoclay. The XRD results revealed that when the modifier addition was increased from 10wt.% to 40 wt.%, the interlayer spacing of the nanoclay increased from 12.43 Å being... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields