Sharif Digital Repository

To describe immobilized cells in porous microcapsule membranes with straight pores, a novel model called corrugated parallel bundle model (CPBM) was utilized. In this model, a network was developed with 10 main pores each composing 10 pore elements. Cell growth kinetic in the network was examined using non-structural models. Effectiveness factor and pore plugging time were calculated by solving reaction-diffusion equation set via finite difference method. The findings revealed that diffusion coefficient for lower order reactions will create a lesser impact on the reduction of effectiveness factor. These findings also indicated that the use of such supporting carrier for cell immobilization... 

In this paper we consider maintaining the visibility of a segment observer moving inside a simple polygon. A practical instance of this problem is to identify the regions of a planar scene illuminated by a fluorescent lamp while the lamp moves around. We consider both strong and weak visibility in this paper. Our method is based on the shortest path tree which builds a linear-sized data structure in O(n) time, where n is the number of the vertices of the underlying simple polygon P. We first compute VP(st̄), the initial view of the segment observer st̄. Then, as st̄ moves, each change of VP(st̄) can be computed in O(log2(|V P(st̄)|)) time when the observer is allowed to change its direction,... 

The authors carried out the study to prepare chitosan N-isopropylacrylamide hydrogel via heating and radiation processes. Properties investigation of prepared samples revealed that radiation prepared samples show higher yield and swelling ratios in comparison with the heating prepared ones. Effects of hydrogel addition to drilling mud on its important rheological properties such as apparent viscosity, plastic viscosity, and stress-strain behavior are measured. The rheological properties of hydrogel were compared with cellulosemethylcarboxyl and resins that are widely used in drilling fluid. The results demonstrate that whereas linear polymer effects on mud properties are more significant in... 

Within the past decade, since impediments in nonrenewable fuel sources and the contamination they cause, utilizing green energies, such as those that are sun-oriented, in tandem with electric vehicles, is a developing slant. Coordinating electric vehicle (EV) charging stations with sun-powered boards (PV) reduces the burden of EV charging on the control framework. This paper presents a state-of-the-art literature review on remote control transmission frameworks for charging the batteries of electric vehicles utilizing sun-based boards as a source of power generation. The goal of this research is to advance knowledge in the wireless power transfer (WPT) framework and explore more about... 

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg-1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg−1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

Cross correlation of the Integrated Sachs-Wolfe signal (ISW) with the galaxy distribution in late time is a promising tool for constraining the dark energy properties. Here, we study the effect of dark energy clustering on the ISW-galaxy cross correlation and demonstrate the fact that the bias parameter between the distribution of the galaxies and the underlying dark matter introduces a degeneracy and complications. We argue that as the galaxy's host halo formation time is different from the observation time, we have to consider the evolution of the halo bias parameter. It will be shown that any deviation from ΛCDM model will change the evolution of the bias as well. Therefore, it is deduced... 

The results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during hydraulic hysteresis had a non-linear increasing trend with matric suction, with greater values upon wetting. However, due to differences in material properties and inter-particle forces, a different behavior is expected for the Gmax of unsaturated sand. Although considerable research has been devoted in recent years to characterizing the behavior of the Gmax of sand during drying, less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effective stress-based semi-empirical model was... 

The observed hemispherical power asymmetry in cosmic microwave background radiation can be explained by long-wavelength mode (long-mode) modulation. In this paper, we study the possibility of detecting this effect in the angular power spectrum of the 21-cm brightness temperature. For this task, we study the effect of the neutral hydrogen distribution on the angular power spectrum. This is done by formulating the bias parameter of the ionized fraction to the underlying matter distribution. We also discuss the possibility that the long-mode modulation is accompanied by a primordial non-Gaussianity of local type. In this case, we obtain the angular power spectrum with two effects of primordial... 

The observed hemispherical power asymmetry in cosmic microwave background radiation can be explained by long-wavelength mode (long-mode) modulation. In this paper, we study the possibility of detecting this effect in the angular power spectrum of the 21-cm brightness temperature. For this task, we study the effect of the neutral hydrogen distribution on the angular power spectrum. This is done by formulating the bias parameter of the ionized fraction to the underlying matter distribution. We also discuss the possibility that the long-mode modulation is accompanied by a primordial non-Gaussianity of local type. In this case, we obtain the angular power spectrum with two effects of primordial... 

Experimental studies have indicated that the small strain shear modulus, Gmax, of unsaturated silt and clay has a greater amount during imbibition than during drainage, when presented as a function of matric suction. However, due to material properties and inter-particle forces, different behavior is expected in the case of sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drainage, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during imbibition. In the study presented herein, an effort has been made to compare the Gmax behavior of specimens of silt and sand during... 

A conventional triaxial test device was modified to characterize the hydro-mechanical behavior of a loessial soil during isotropic and shear loadings. This device is capable of precise and continuous measurements of water outflow during the application of loading. The tests were performed on "undisturbed" cylindrical specimens, which were taken from loessial deposits in Gorgan, a city in the northeast of Iran. Experimental measurements indicate that the hydro-mechanical behavior of loess is highly affected by the extent of applied mean net stress and the level of suction. During both isotropic and shearing stages of loading, the tested specimens may exhibit collapse, abrupt decrease in... 

Site investigations at limited-access project sites often require mobilization of smaller rigs that may not have the reaction mass required to perform soundings to the desired depth. This study explores the feasibility of a new conceptual bio-inspired solution by adapting functional principles from organisms whose primary mode of locomotion is soil burrowing, including razor clams, caecilians, and earthworms. These organisms radially expand a segment of their body to increase the normal radial pressure acting on it to temporarily form an anchor. This study evaluates the dimensions required for self penetration of an idealized bio-inspired probe consisting of a radially expanding shaft and a... 

Temporal and spatial analysis of dynamics of hybrid transversely excited atmospheric pressure (TEA)-CO2 lasers is studied using two different models with four and eight energy levels. These models are used for simulation of the laser and computing the output energy. Effects of several parameters such as input energies and gas mixture concentrations (especially presence of CO molecules) are also studied. © 2007 Elsevier Ltd. All rights reserved  

Slip along fractures or hydrothermal alternation may lead to formation of weak layers of soils intercalated between the existing rock layers. In this situation, characterization of the behavior of rock fractures requires consideration of a complicated interaction of mechanical properties and geometrical characteristics of the fracture, coupled together with the properties of infill materials. Of the most important parameters which may considerably affect the behavior of an infilled fractured rock are the hydraulic properties of the infill material. These properties reflect the water retention ability of the infill material and determine the meniscus arrangements between the particles. This... 

This paper presents a study on the simulation of cone penetration tests (CPTs) using the discrete element model (DEM) method. This study’s main objective is to investigate the effect of different modeling parameters and simulation configurations on the ability of three-dimensional DEM simulations to replicate realistic CPT tip resistance (qc) and friction sleeve shear stress (fs) measurements. The CPT tests were simulated in virtual calibration chambers (VCCs) containing particles calibrated to model the behavior of sand. The parameters investigated included the granular assembly properties, interparticle contact parameters, particle–probe interface characteristics, and simulation... 

Small strain shear modulus, Gmax, is one of the most important parameters for the characterization of the behavior of earth structures subjected to static or dynamic loading conditions. This research presents an experimental laboratory study on the effect of non-plastic fines content and hydraulic hysteresis on the Gmax of unsaturated sandy soils. In this regard, clean Firoozkuh No. 161 silica sand which is classified as poorly graded sand was mixed with different percentages of non-plastic Firoozkuh silt. A set of bender element tests were carried out using two modified triaxial devices. The modifications on these two apparatus were to add HAV ceramic discs for air–water control of... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite... 

Here, Graphene oxide/poly (acrylamide -2-acrylamide-methyl-propanesulfonic acid)/sodium alginate (GO/PA-AMPS/SA) hydrogel was synthesized through a free-radical polymerization approach. The impact of Graphene Oxide (GO) content on mechanical strength, swelling behavior, and the adsorption performance of prepared hydrogel was studied. The operating parameters, including contact time, solution pH, and initial Cu(II) content on the adsorption capacity of the hydrogel, were studied. The maximum Cu(II) adsorption capacity of 230.8 mg/g was obtained for GO/PA-AMPS/SA under a pH of 5, the contact time of 270 min, and adsorbent content of 0.5 g/L at 25 °C. The high value of adsorption capacity after... 

We study the problem of approximating a function F:ℝ → ℝ by a piecewise-linear function F̄ when the values of F at {x 1,...,xn} are given by a discrete probability distribution. Thus, for each xi we are given a discrete set y i,1,..., yi,mi of possible function values with associated probabilities pi,j such that Pr[F(xi) = yi,j] = pi,j. We define the error of F̄ as error(F, F̄) = maxi=1n E[|Fxi) - F̄(xi)|]. Let m = ∑i=1nmi be the total number of potential values over all F(xi). We obtain the following two results: (i) an O(m) algorithm that, given F and a maximum error ε, computes a function F̄ with the minimum number of links such that error(F, F̄) ≤ ε; (ii) an O(n4/3+δ + mlogn) algorithm...