Sharif Digital Repository

Data storage systems (DSSs) and their availability play a crucial role in contemporary datacenters. Despite using mechanisms such as automatic failover in datacenters, the role of human agents and consequently their destructive errors is inevitable. Due to very large number of disk drives used in exascale datacenters and their high failure rates, the disk subsystem in storage systems has become a major source of data unavailability (DU) and data loss (DL) initiated by human errors. In this paper, we investigate the effect of incorrect disk replacement service (IDRS) on the availability and reliability of DSSs. To this end, we analyze the consequences of IDRS in a disk array, and conduct... 

In this paper, we investigate the effect of incorrect disk replacement service on the availability of data storage systems. To this end, we first conduct Monte Carlo simulations to evaluate the availability of disk subsystem by considering disk failures and incorrect disk replacement service. We also propose a Markov model that corroborates the Monte Carlo simulation results. We further extend the proposed model to consider the effect of automatic disk fail-over policy. The results obtained by the proposed model show that overlooking the impact of incorrect disk replacement can result up to three orders of magnitude unavailability underestimation. Moreover, this study suggests that by... 

Emergence of Solid-State Drives (SSDs) have evolved the data storage industry where they are rapidly replacing Hard Disk Drives (HDDs) due to their superiority in performance and power. Meanwhile, SSDs have reliability issues due to bit errors, bad blocks, and bad chips. To help reliability, Redundant Array of Independent Disks (RAID) configurations, originally proposed to increase both performance and reliability of HDDs, are also applied to SSD arrays. However, the conventional reliability models of HDD RAID cannot be intactly applied to SSD arrays, as the nature of failures in SSDs are totally different from HDDs. Previous studies on the reliability of SSD arrays are based on the... 

In recent years, high availability and reliability of data storage systems (DSS) have been significantly threatened by soft errors occurring in storage controllers. Due to their specific functionality and hardware-software stack, error propagation and manifestation in DSS is quite different from general-purpose computing architectures. To the best of our knowledge, no previous study has examined the system-level effects of soft errors on the availability and reliability of DSS. In this paper, we first analyze the effects of soft errors occurring in the server processors of storage controllers on the entire storage system dependability. To this end, we implement the major functions of a... 

Low-latency data access is crucial in edge clouds serving autonomous vehicles. Storage I/O caching is a promising solution to deliver the desired storage performance at a reasonable cost in vehicular edge platforms. Current storage I/O caching methods, however, are not specialized for workload characteristics and demands of autonomous vehicles and/or do not consider the communication latency between the vehicle and the base station hosting the edge cloud node. In this work, we propose a storage mechanism for vehicular edge cloud platforms taking communication, I/O cache, and storage latencies into account. We evaluate our proposed framework using realistic storage traces of vehicular... 

The latency associated with accessing data stored on edge computing servers for vehicles encompasses both the communication between a vehicle and a server as well as a latency of a data storage system. To enable low-latency vehicular services, an efficient resource management should consider the communication as well as the storage I/O cache resource allocation along with a data access pattern and a priority of individual vehicular services. Therefore, we focus on a joint optimization of communication and storage I/O cache resource allocation for access to data of vehicular services hosted by the edge computing servers. The proposed framework determines the data placement for the services... 

A nonlinear inverse finite element method is developed for estimation of initial blank shape and strain distribution in final shape. This method often based on implicit static algorithms, causes sometimes convergence problems because of strong nonlinearities. In order to avoid the converging problems, especially in the quasi vertical walls, an appropriate initial guess is introduced. By using this initial guess, the number of iterations in the nonlinear numerical solution is decreased, solution speed is significantly increased and complicated geometries can be analyzed by this method with good accuracy. Application to a Srail part shows good agreement between commercially available finite... 

An experimental study was carried out on an axisymmetric supersonic inlet with external compression in order to investigate the buzz phenomenon at different angles of attack and mass flow rates. The model was equipped with accurate and high-frequency pressure sensors, and the tests were conducted at Mach numbers varying from 1.8 to 2.5, for various angles of attack. Shadowgraph visualization technique, together with a high-speed camera, was used to provide the visual description of the shock structure in front of the inlet and to study the characteristics of buzz. Furthermore, pressure distribution over the spike surface was measured using several pressure sensors. Frequency of the buzz and... 

An experimental study was carried out on an axisymmetric supersonic inlet with external compression in order to investigate the buzz phenomenon at different angles of attack and mass flow rates. The model was equipped with accurate and high-frequency pressure sensors, and the tests were conducted at Mach numbers varying from 1.8 to 2.5, for various angles of attack. Shadowgraph visualization technique, together with a high-speed camera, was used to provide the visual description of the shock structure in front of the inlet and to study the characteristics of buzz. Furthermore, pressure distribution over the spike surface was measured using several pressure sensors. Frequency of the buzz and... 

Stable and flexible super-hydrophilic nanotubular-based titanium oxide electrode has been utilized as the active electrode of self-powered humidity sensor. TiO2 nanotubular electrodes fabricated through anodization method and utilized in combination with Kapton electrode as the triboelectric nanogenerator (TENG). Vertical contact-separation mode TENG performance has been examined in various range of frequencies and the maximum output voltage and current more than 300 V and 40 μA respectively with maximum power of 1.25 ± 0.67 mW has been achieved at 4 Hz. The fabricated TENG has been employed as the active self-powered humidity sensor. Super-hydrophilic feature of TiO2 nanotubes resulted in... 

An experimental study was carried out on an axisymmetric supersonic inlet with external compression in order to investigate the buzz phenomenon at different angles of attack and mass flow rates. The model was equipped with accurate and high-frequency pressure sensors, and the tests were conducted at Mach numbers varying from 1.8 to 2.5, for various angles of attack. Shadowgraph visualization technique, together with a high-speed camera, was used to provide the visual description of the shock structure in front of the inlet and to study the characteristics of buzz. Furthermore, pressure distribution over the spike surface was measured using several pressure sensors. Frequency of the buzz and... 

In this paper, general relations between two different stress tensors Tf and Tg, respectively conjugate to strain measure tensors f(U) and g(U) are found. The strain class f(U) is based on the right stretch tensor U which includes the Seth-Hill strain tensors. The method is based on the definition of energy conjugacy and Hill's principal axis method. The relations are derived for the cases of distinct as well as coalescent principal stretches. As a special case, conjugate stresses of the Seth-Hill strain measures are then more investigated in their general form. The relations are first obtained in the principal axes of the tensor U. Then they are used to obtain basis free tensorial equations... 

In this paper, conjugate stresses of the Seth-Hill strain measures are treated by means of the definition of energy conjugacy and Hill's principal axis method. This approach results in relations between components of two different conjugate stress tensors. The results are valid for distinct as well as coalescent principal stretches. Illustrative examples are solved to demonstrate the simplicity and usefulness of the derived relations between conjugate stress tensors. © 2000 Elsevier Science Ltd