Loading...
Search for: koolivand--abdollah
0.135 seconds

    Modeling, Simulation and Control of Batch Suspension Polymerization Reactor

    , M.Sc. Thesis Sharif University of Technology Koolivand, Abdollah (Author) ; Shahrokhi, Mohammad (Supervisor)
    Abstract
    Most of Final properties of polymers such as morphological characteristics are related to molecular weight distribution (MWD) and particle size distribution (PSD). It is possible to obtain the desired properties by controlling of these indices. In this work, modeling, simulation, and control of final properties of styrene have been considered. First, kinetic of reaction has been investigated which is a free radical type. Molecular weight distribution has been calculated by using moment method. Next, population balance equation (PBE) has been used to model PSD. For this system, mass, energy, and moment conservation equations are a set of stiff ordinary differential equations (ODEs). PBE is a... 

    Preparation and Investigation of the Electrochemical behavior of the Glassy Carbon Electrode Modified with Nanodiamond/Nanographite and NanoNi Composites: Applications to Pharmaceutical Determinations

    , M.Sc. Thesis Sharif University of Technology Koolivand, Zeinab (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    Part 1: In the first work, the electrochemical behavior of Ceftriaxone was thoroughly investigated at the surface of a glassy carbon electrode modified with nano-diamond graphite (NDG). The surface morphology and electrochemical properties of thin film modifier are characterized by Scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. The prepared electrode showed a considerable improvement in the peak current of Ceftriaxone compared to either glassy carbon electrode or nanodiamond (NDs) modified glassy carbon electrode. Under the optimum conditions, the modified electrode showed a wide linear dynamic range of 0.04-10 μM with the detection limit of 10 nM for voltammetric... 

    Experimental investigation on the thermal performance of ultra-stable kerosene-based MWCNTs and Graphene nanofluids

    , Article International Communications in Heat and Mass Transfer ; Volume 108 , 2019 ; 07351933 (ISSN) Askari, S ; Rashidi, A ; Koolivand, H ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    A simple chemisorption method was used to graft on the surface of MWCNTs and Graphene nanoparticles to prepare stable kerosene-based MWCNTs and Graphene nanofluids. The prepared nanofluids remained stable for more than five months and no sedimentation was observed. Regarding the effect of temperature on thermo-physical properties, it was observed that although increasing nanoparticle concentration led to an increase in the fluid viscosity, it was negligible enough at lower nanoparticle loading. Moreover, adding nanoparticles to the base fluid did not have any noticeable impact on the fluid density which was negligible even at high concentrations. The thermal conductivity improvement was... 

    Optimal control of molecular weight and particle size distributions in a batch suspension polymerization reactor

    , Article Iranian Polymer Journal (English Edition) ; Volume 28, Issue 9 , 2019 , Pages 735-745 ; 10261265 (ISSN) Koolivand, A ; Shahrokhi, M ; Farahzadi, H ; Sharif University of Technology
    Springer London  2019
    Abstract
    Mechanistic modelling is an engineering approach to simulate reasonable physical and chemical processes to develop a model to describe the behaviour of a system. Mathematical models are commonly adopted to explore the physical limits of a process, and are applied to process development, optimization and control. In this work, the population balance model and the moment technique have been utilized to model a suspension polymerization reactor and predict the dynamic evolution of particle size and molecular weight distributions. These distributions are two important factors that affect the physical, rheological and mechanical properties of a polymer, and its final product quality. The cell... 

    Factorized Ground State and Magnetic Properties of Ferrimagnets

    , M.Sc. Thesis Sharif University of Technology Rezai, Mohammad (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    The anisotropic Heisenberg ferrimagnet which is composed of two different kind of spins is studied. We have found the exact (factorized) ground state of a general class of ferrimagnets in the presence of a magnetic field which includes the frustrated, anisotropic and long range interactions for arbitrary dimensional space. The factorized ground state is a product of single particle kets on a bipartite lattice composed of two different spins (σ, ρ) which is characterized by two angles, a bi-angle state. The spin waves analysis around the exact ground state show two branch of excitations which is the origin of two dynamics of the model. The signature of these dynamics is addressed as a peak... 

    Entanglement, Quantum Phase Transition and Topological Order

    , Ph.D. Dissertation Sharif University of Technology Kargarian, Mehdi (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    We are interested in the relation between entanglement and quantum phase transitions. We have presented a formulation on how the entanglement of a very large the system is related to the entanglement of a small part of system. The renormalization of entanglement is an indicator of the critical behavior of the models. The framework of our approach is introduced about the Ising model. In particular, we show that derivative of entanglement developes a minimum close to the critical point. We further clarify that this minimum point approaches to the exact critical point of the system as the system becomes thermodynamic. This phenomenon is governed by an exponent that is closely related to the... 

    Bioglass Coating on 316L Stainless Steel

    , M.Sc. Thesis Sharif University of Technology Pourhashem, Sepideh (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    Bioactive glasses are able to bond to soft and hard tissues in living body and their application as coating on metallic implants like 316L stainless steel has two important effects: (1) intimate link between bone and materials and (2) corrosion protection of metallic implant in body fluid and protection from tissues in front of corrosion products. Therefore, in this research, 45S5 bioactive glass prepared via sol- gel method was dip coated on 316L stainless steel substrates and its characteristics was investigated.Results of phase analysis showed that by sintering 45S5 bioglass at 600 ˚C for 5 h, an amorph sample with small amount of Na2Ca2Si3O9 was obtained. So, the bioglass coated samples... 

    Fermionic Approach To The One Dimensional Kondo Necklace Model

    , M.Sc. Thesis Sharif University of Technology Arab, Arian (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    Strongly correlated materials are kind of materials in which novel electric and magnetic properties will appear as a result of strong correlations among their electrons like “heavy fermion materials”. Kondo lattice model is a model to describe heavy fermion materials. If we are merely interested in the magnetic properties of heavy fermions we can replace the Kondo lattice Model with the simpler model called the Kondo-necklace model which consists of the interactions only among the spins of the itinerant (conduction) and localized electrons (magnetic impurities) and also the interactions between the spins of the itinerant electrons. In this thesis we investigate the properties of the one... 

    Micro Arc Oxidation Coating on Magnesium Alloy AZ31 and Study its CorrosionBehavior in Physiological Solution

    , M.Sc. Thesis Sharif University of Technology Salami, Behrooz (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    Magnesium and its alloys have been used as biodegradable implements in recent years. However Magnesium implements may corrode in the body before the natural healing process of the damaged tissue. MAO process was studied in order to reduce primary corrosion of Magnesium alloy in Simulated Body Fluid (SBF). MAO coating was created on AZ31 alloy in a nontoxic alkaline-silicate solution at DC current densities of 5, 10, 15 and 20 mA/cm2 for 30 minutes and the current was in form of 20-10-5 mA/cm2 steps that each were applied for 10 minutes. The maximum corrosion resistance was observed for the mentioned step applied current in a 30g/l Sodium Silicate solution. Furthermore the effects of adding... 

    Quantum Phase Transition in Kondo-Necklace Model: Concurrence Measure Within Perturbative Continuous Unitary Transformation Formalism

    , M.Sc. Thesis Sharif University of Technology Hemmatiyan, Shayan (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    In this thesis, we consider the Kondo-necklace model to investigate the quantum phase transition between the Kondo-singlet and antiferromagnetic phases. There is no exact solution for this model. We would like to study the quantum critical behaviour of this model on one, two and three dimensional spaces in addition to ladder geometry. In this respect, we looked for a proper method which can give us some information for our model on any spaces mentioned above. Therefore, we implemented the perturbation continuous unitary transformation (PCUT) for the Kondo-necklace model. By using this method, we can not only calculate the ground state energy for 1, 2, 3 dimension and n-leg ladder... 

    Simulatin of Reinforcement Corrosion in Pozzolanic Concrete by Neural Network

    , M.Sc. Thesis Sharif University of Technology Noori, Hassan (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    One of the most important factors of reducing durability of concrete structures is corrosion of steel reinforcement in concrete. In this paper, corrosion behavior of reinforcing steel in concrete is investigated in two different methods of protection based on neural network. As regard the first method, pozzolanic additives with optimized percentage were added to Concrete mix design (the percentage of these additives are 25% Weight of cement of fly ash, Micro silica with 10 percent of weight of cement and 25% of Blast Furnace slag weight of cement). In the second approach of protection, 0/5 percent weight of cement of ferrogard 901 inhibitor is added to basic mix concrete design and the... 

    Numerical Computation of Perturbative Continuous Unitary Transformation in Kondo-Necklace Model

    , M.Sc. Thesis Sharif University of Technology Ghasemi, Nader (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    The fascinating subject of heavy fermion physics in rare-earth and actinide systems has been a challenge for theoretical and experimental investigations for decades. Kondo Necklace model is one of the promising models in the study of strongly-correlated heavy fermion compounds, which is studied in this project.One of the methods to diagonalize a Hamiltonian properly, regardless of system size, is the continuous unitary transformation. In this approach, the Hamiltonian is considered as a function of a flow parameter. The Hamiltonian is transformed to a simpler form (diagonal or band-block diagonal) under a flow equation which is based on applying infinite numbers of infinitesimal unitary... 

    Entanglement Spectrum of One Dimensional Ising Model in Transverse Field

    , M.Sc. Thesis Sharif University of Technology Safaei, Alireza (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    Entanglement spectrum is the set of eigenvalues of reduced density matrix for a definite state. It contains more information than the entanglement entropy. This spectrum can show entanglement measure, quantum phase transition and topological order in a system. In recent years, the entanglement spectrum for several models has been studied. The entanglement spectrum shows a correspondence to the energy spectrum within some specific regions, which are related to the edge state of the system; It has been verified for the Heisenberg ladder [1] and fractional quantum Hall effect [3]. Moreover, the topological order can be seen in the entanglement spectrum. There exists an acceptable adaption... 

    Quantum Renormalization Group of alternating Ising Model with Dzyaloshinski - Moriya Interaction: Phase Diagram and Quantum Information Properties

    , M.Sc. Thesis Sharif University of Technology Amiri, Neda (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    In this thesis, we have implemented the quantum renormalization group method to study quantum spin systems. We reviewed the recent progress to calculate the quantum information properties of these models. The recent investigations show that concurrence and entanglement are two quantities which can show quantum critical properties of the quantum systems. More specifically, the derivative of entanglement and the second derivative of ground state energy show divergent behavior at the quantum critical point. Moreover, the ground state fidelity for two different parameters close to quantum critical point shows a drop which leads to a divergent behavior in its corresponding susceptibility. We have... 

    Improvement of Corrosion Resistance of Concrete Sewer Pipes Against Microbial Corrosion

    , M.Sc. Thesis Sharif University of Technology Mozafari, Ali (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    Microbiologically Influenced Corrosion (MIC) of concrete sewer ptpes and wastewater collection systems has been reported in many places of the world. Recently, numerous copper compounds have been used for bacterial growth control in sewer pipes. In this thesis, bath parameterswere optimized in order to maximize copper osmosis to the porous concrete matrix.Concrete pipes were electrochemically coated inCopper Lactate bath in a constant current mode (1=0.6 A), while temperature was set to 25, 50, 75 and 95
    °Cand pH to 9,10 and 11. Specimens were then characterized by scanning electron

    microscopy, optical microscopy, XRD andAAS. Copper Osmosis was highest in pH=9 and... 

    Corrosion Resistance of Graphene-Titania Coating on 316 Stainless Steel by Electrophoretic Deposition

    , M.Sc. Thesis Sharif University of Technology Parvizi, Sahar (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    The aim of this thesis was creating Titania/RGO coating with electrophoretic method to evaluate the corrosion resistance of stainless steel 316. At first Graphene Oxide were synthesized with modified Hammers method and their physical, chemical and morphological properties have been investigated using XRD, FTIR, EDX, TGA, UV-Vis and Raman analysis. then Graphene Oxide was added to the bath of titanium and was deposited on 316 stainless steel substrates. Moreover, corrosion protection of coating has been examined using Poarization test and Electrochemical Impedance Spectrometry. The effect of deposition parameters on corrosion properties of composite coatings were examined. The key variables... 

    Ground State Phase Diagram of Two-dimensional Frustrated Ising Model in Transverse Field

    , Ph.D. Dissertation Sharif University of Technology Sadrzadeh, Marzieh (Author) ; Langari, Abdollah (Supervisor)
    Abstract
    In this thesis, we study the effect of quantum fluctuations by means of a transverse magnetic field () on the ground state of frustrated antiferromagnetic Ising models on the checkerboard and square lattices with nearest neigbor couplings J1 and next-to-nearest neighbor couplings J2. At zero field, such models have exponentially large degenerate classical ground states at J2 ... J1 for the checkerboard lattice and at J2 = 0:5J1 for the square lattice. Quantum fluctuations can have a major role to lift the degeneracies toward a unique quantum ground states. We consider two types of quantum fluctuations, harmonic ones by using linear spin wave theory (LSWT) with single-spin flip excitations... 

    Evaluation Effects of Mo, Bi &Sn Biocides On the Anti-Fouling Paints

    , M.Sc. Thesis Sharif University of Technology Bayat, Amin (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    In this research Feasibility of application of oxide compounds of bismuth, molybdenum and tin as biocide was studied. So some epoxy paints with different ratio of these compounds were formulated. Afterward some tests were performed to assessment paints properties such as leaching rate, antifouling activity, adhesion, corrosion resistance and impact resistance. Results of leaching rate test showed that increase in the ratio of bismuth oxide from 10% to 60%, led to increase leaching rate from 0.029mg.day-1.cm-2 to 0.126mg.day-1.cm-2. beside that Microscopic results showed proved that the ratio of bismuth oxide in the cured coating is 25% of the paint formulate. In similar ratio of biocides,... 

    Preparation and Characterization of HA/ZrO2 Biocomposite Coating on 316 Stainless Steel Fabricated by Electrodeposition

    , M.Sc. Thesis Sharif University of Technology Shojaee, Peyman (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    In this research, role of zirconia nanoparticles as a biocompatible material which has great mechanical properties, was investigated on corrosion behavior and bonding strength of HA coating. HA- ZrO2 composite prepared by a 2-step pulse electrodeposition method. Effect of pH (3.5, 4.5), bath temperature (60, 80 ͦC), current density (0.5, 1, 2 mA/cm2) and zirconia concentration (5, 10, 15 g/L) on coating characteristics were studied. X-ray diffraction was employed for phase analysis. Morphology and microstructure of samples observed utilizing scanning electron microscope (SEM) and elemental analysis was done by EDS. In order to corrosion studies electrochemical impedance spectroscopy (EIS)... 

    An Investigation on Zirconia Nano-particles Coating Deposited on Magnesium AZ91 alloy Using Electrodeposition Method

    , M.Sc. Thesis Sharif University of Technology Amiri, Hamed (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    Recently magnesium alloys have shown great potential as biodegradable metallic implants. However, due to high corrosion rate in the body environment, these alloys would be degraded before the tissue healing time period. Therefore corrosion resistance of these alloys has to be improved in order to be used in biological environments. In the present work, supposing improvement of corrosion properties of magnesium AZ91D alloy, the alloy has been coated with biocompatible nano-Zirconia particles using Electrophoretic deposition method and the effects of deposition parameters such as bath agitation, Zirconia concentration, current density and duration of deposition process on the properties of the...