Sharif Digital Repository

Abstract We design a thermo-photovoltaic Tandem cell which produces high open circuit voltage (Voc) that causes to increase efficiency (η). The currently used materials (AlAsSb-InGaSb/InAsSb) have thermo-photovoltaic (TPV) property which can be a p-n junction of a solar cell, but they have low bandgap energy which is the reason for lower open circuit voltage. In this paper, in the bottom cell of the Tandem, there is 30 quantum wells which increase absorption coefficients and quantum efficiency (QE) that causes to increase current. By increasing the current of the bottom cell, the top cell thickness must be increased because the top cell and the bottom cell should have the same current. In... 

Prediction of the amino acids that have a catalytic effect on the enzymes is a major stage in appointing the activity of the enzymes and classification. The biological activity of a protein usually depends on the existence of a small number of amino acids. Recently, many algorithms have been proposed in the literature for finding these amino acids which are complex and time consuming. In this paper, we will introduce a new method for predicting the active sites that will use the spatial coordinates and the type of amino acids that contain the active sites. In order to increase the speed we use an approximate graph isomorphism algorithm. Furthermore, this algorithm allows us to find several... 

Asian red ginseng was used for green reduction of chemically exfoliated graphene oxide (GO) into reduced graphene oxide (rGO). The reduction level and electrical conductivity of the ginseng-rGO sheets were comparable to those of hydrazine-rGO ones. Reduction by ginseng resulted in repairing the sp 2 graphitic structure of the rGO, while hydrazine-rGO showed more defects and/or smaller aromatic domains. The ginseng-rGO sheets presented a better stability against aggregation than the hydrazine-rGO ones in an aqueous suspension. Whilst the hydrophobic hydrazine-rGO films exhibited no toxicity against human neural stem cells (hNSCs), the hydrophilic GO and ginseng-rGO films (as more... 

The problem of finding necessary and sufficient conditions to decompose a complete tripartite graph K(r, s, t) into 5-cycles was first considered by Mahmoodian and Mirzakhani (1995). They stated some necessary conditions and conjectured that these conditions are also sufficient. Since then, many cases of the problem have been solved by various authors; however the case when the partite sets r ≤ s ≤ t have odd and distinct sizes remains open. A necessary condition is t ≤ 3r. Billington and Cavenagh (2011) have shown that when r, s, and t are all odd and r ≤ s ≤ t ≤ κr, where κ ≈ 1.0806, then the conjectured necessary conditions for decomposing are also sufficient. We extend this result... 

Trip production has long been considered as a major element in trip demand estimation. Many models have been presented for this purpose. Models use socio-economic variables in order to predict trip production. This paper develops an Adaptive-Network-based Fuzzy Inference System (ANFIS) models to predict school trip production. ANFIS can construct an input-output mapping based on both human knowledge and stipulated input-output data pairs. In order to improve models' generalization capability, a heuristic algorithm is used to generate reasonable initial values for data loss in training data set. Models with different Membership Functions (MFs) were trained, validated and tested with real data... 

A μ-way latin trade of volume s is a set of μ partial latin rectangles (of inconsequential size) containing exactly the same s filled cells, such that if cell (i, j) is filled, it contains a different entry in each of the μ partial latin rectangles, and such that row i in each of the μ partial latin rectangles contains, set-wise, the same symbols and column j, likewise. In this paper we show that all μ-way latin trades with sufficiently large volumes exist, and state some theorems on the non-existence of μ-way latin trades of certain volumes. We also find the set of possible volumes (that is, the volume spectrum) of μ-way latin trades for μ = 4 and 5. (The case μ = 2 was dealt with by Fu,... 

The set of integers k for which there exist three latin squares of order n having precisely k cells identical, with their remaining n2 -k cells different in all three latin squares, denoted by I3[n], is determined here for all orders n. In particular, it is shown that I3[n] = {0,.,n2 -15}U [n2 - 12,n2-9,n2], for n ≫8. ©2002 Eisevier Science B.V. All rights reserved  

Mechanical properties and microstructural analysis of Expanded Perlite Aggregate (EPA) concretes are presented. Using 10% EPA, the effects of using various types of fibre were investigated. For all specimens, fibrous and non-fibrous, the compressive and the splitting tensile strengths were obtained. Complete stress–strain curves for fibre-reinforced specimens were obtained. A new index for representing the toughness of fibre-reinforced Perlite concretes is introduced. The addition of fibres substantially increased the splitting tensile strength. Steel fibres with “indentations” had the best performance in this regard. Regarding the toughness, specimens with “hooked” steel fibres performed... 

Electro-reduction behavior of testosterone at reduced graphene oxide/glassy carbon electrode (rGO/GCE) was studied. Cationic surfactant cetyltrimethylammonium bromide (CTAB) enhanced the reduction peak of testosterone. In borate buffer (pH 5.4) CTAB-testosterone showed a reduction peak at - 1.1 V (versus, Ag/AgCl). The increment of peak current obtained by deducting the reduction peak current of the CTAB-testosterone was rectilinear with testosterone concentration in the range of 2.0 to 210.0 nM, with a detection limit of 0.1 nM. The sensor was used for quantification of testosterone in biological fluids and drug  

A new method for speeding up the approximate maximum posterior marginal (MPM) inference in meanfield approximation of a fully connected graph is introduced. Weight of graph edges is measured by mixture of Gaussian kernels. This fully connected graph is used for segmentation of image data. The bottleneck of the inference in meanfield approximation is where the similar bilateral filtering is needed for updating the marginal in the message passing step. To speed up the inference, the adaptive manifold high dimensional Gaussian filter is used. As its time complexity is 0(ND), it leads to accelerating the marginal update in the message passing step. Its time complexity is linear and relative to... 

Segmentation of a scene to the part made is a challenging work. In this paper a graphical model is used for this task. The methods based on geometrical derivatives such as curvature and normal often haven't good result in segmentation of geometrically-complex architecture and lead to over-segmentation and even failure. Proposed method for segmentation contains two steps. At first region growing based on curvature, normal and color is used for growing region. This segmented cloud is used for unary potential in graphical model. Fully connected graph for Conditional Random Field with Gaussian kernel for pair wise potentials is used for correcting this segmentation. Gaussian kernels are based on... 

In this paper, the Extended Kalman filtering (EKF) approach has been used to infer gene regulatory networks using time-series gene expression data. Gene expression values are considered stochastic processes and the gene regulatory network, a dynamical nonlinear stochastic model. Using these values and a modified Kalman filtering approach, the model's parameters and consequently the interactions amongst genes are predicted. In this paper, each gene-gene interaction is modeled using a linear term, a nonlinear one, and a constant term. The linear and nonlinear term coefficients are included in the state vector together with the gene expressions' true values. Through the extended Kalman... 

This paper presents a two layer texture modeling method to recognize architectural distortion in mammograms. We propose a method that models a Gaussian mixture on the Curvelet coefficients and the outputs of Spiculated Lesion Filters. The Curvelet transform and the Spiculated Lesion Filters have been applied to extract textural features of mammograms in literature. However the key difference between this study and the previous ones is that in our approach, a Gaussian mixture models the textural features extracted by the Curvelet transform and the Spiculated Lesion Filters. The results of the current study are shown in the form of accuracy and the area under the receiver operating... 

Multiple human 3D pose estimation is a challenging task. It is mainly because of large variations in the scale and pose of humans, fast motions, multiple persons in the scene, and arbitrary number of visible body parts due to occlusion or truncation. Some of these ambiguities can be resolved by using multiview images. This is due to the fact that more evidences of body parts would be available in multiple views. In this work, a novel method for multiple human 3D pose estimation using evidences in multiview images is proposed. The proposed method utilizes a fully connected pairwise conditional random field that contains two types of pairwise terms. The first pairwise term encodes the spatial... 

Multiple human 3D pose estimation is a challenging task. It is mainly because of large variations in the scale and pose of humans, fast motions, multiple persons in the scene, and arbitrary number of visible body parts due to occlusion or truncation. Some of these ambiguities can be resolved by using multiview images. This is due to the fact that more evidences of body parts would be available in multiple views. In this work, a novel method for multiple human 3D pose estimation using evidences in multiview images is proposed. The proposed method utilizes a fully connected pairwise conditional random field that contains two types of pairwise terms. The first pairwise term encodes the spatial... 

Impure rhenium and molybdenum bearing solution was passed through a column of Varian strong base anionic resin for selective adsorption of rhenium and molybdenum ions from the solution. Elution of molybdenum and rhenium was carried out using 2 N NaOH and 0.2 N NH4SCN, respectively. The effect of resin bed height on breakthrough time was investigated. Experimental and theoretical curves were compared with good agreement. The results showed that the behavior pattern of these curves was repeatable and almost constant. © 2006 Elsevier B.V. All rights reserved  

A Digital Delta Sigma Modulator (DDSM) is a Finite State Machine (FSM); it is implemented using finite precision arithmetic units and the number of available states is finite. The DDSM always produces a periodic output signal when the input is constant. This paper proposes a novel method of applying periodic dither to a DDSM in order to obtain minimized spurious tones. The effects of adding the pseudorandom dither signal in different stages within the proposed Multi-Stage noise Shaping (MASH) modulator are expressed in the equations, and the results are compared. We present results regarding the periodicity of the quantization noise produced by a MASH modulator with a constant input and a... 

Purpose - Digital Delta Sigma Modulator (DDSM) is used widely in electronic circuits including Radars, class-D power amplifiers and fractional frequency synthesizers. The purpose of this paper is to propose an implementation for MASH DDSMs named as Multi Modulus Reduced Complexity (MMRC) architecture. Design/methodology/approach - This architecture will use a very simple pseudorandom Linear Feedback Shift Register (LFSR) dither signal with period N-d to randomize the digital MMRC modulator used for fractional frequency synthesizers. Using error masking methodology, the MMRC modulator can decrease the hardware consumption and increase accuracy of the fractional frequency synthesizer. Rules... 

The electrocatalytic oxidation of cephalexin and cefazolin has been studied at a carbon paste electrode modified with cobalt salophen (CoSal) by cyclic voltammetry. The selectivity of the carbon paste modified with CoSal in detecting cephalexin and cefazolin was examined. To suggest the electrocatalytic mechanism for electro-oxidation of cefazolin, the electrochemical behavior of ceftriaxone was investigated which has a thiol group out of the beta lactam ring. The electrocatalytic oxidation of these antibiotics is shown to be irreversible at the CoSal modified electrode. Scan rate dependence of cefazolin, which is a sulfur-containing compound, has been examined. The results indicated that... 

This paper discusses the optimal deployment of a cluster consisting of connected AC-coupled, low voltage (48 V) multi-carrier microgrids within an integrated framework. The utilization of this integrated framework proves to be an effective approach for enhancing the reliability, resiliency, and operational quality of the clustered multi-carrier microgrids. Furthermore, it enables improved utilization of distributed energy resources in both grid-connected and stand-alone scenarios. In order to address local objectives, this paper presents a hybrid approach to determine the optimal integration and size of distributed energy resources in autonomous multi-carrier microgrids. Additionally, the...