Sharif Digital Repository

One of the essential pieces of equipment in the power system is the Automatic Voltage Regulator (AVR) or synchronous generator excitation. The system's goal is to maintain the terminal voltage of the synchronous generator at the desired level. AVR is inherently uncertain. Hence, the proposed controller should be able to handle the problem. In this paper, Fractional Order Fuzzy PID (FOFPID) controller has been employed to control the system. To enhance the controller's performance, the Grasshopper Optimization Algorithm (GOA) is used to tune the controller's parameters. Unlike other methods, the FOFPID controller gains are not constant and alter in different operating conditions. The... 

Recently it was shown that the differential form of Eringen’s nonlocal elastic theory is unable to model, predict and track the mechanical behaviors of many nano-structures due to their boundary conditions. Therefore, having an accurate model for formulating such structures became an important issue. With respect to this concern, in this study, the influence of having an axially varying elastic environment on vibrational behavior of nanobeams is investigated for the first time. Size-dependent effects are modeled using Eringen’s two-phase local/nonlocal integral model which is well-posed with higher accuracy. The elastic environment is modeled using the Pasternak-Winkler method which could... 

In [20] Kraj´ıˇcek and Pudl´ak discovered connections between problems in computational complexity and the lengths of first-order proofs of finite consistency statements. Later Pudl´ak [25] studied more statements that connect provability with computational complexity and conjectured that they are true. All these conjectures are at least as strong as P ̸= NP [23, 25, 24]. One of the problems concerning these conjectures is to find out how tightly they are connected with statements about computational complexity classes. Results of this kind had been proved in [20, 22]. In this paper, we generalize and strengthen these results. Another question that we address concerns the dependence between... 

In [20] Krajíček and Pudlák discovered connections between problems in computational complexity and the lengths of first-order proofs of finite consistency statements. Later Pudlák [25] studied more statements that connect provability with computational complexity and conjectured that they are true. All these conjectures are at least as strong as [23-25].One of the problems concerning these conjectures is to find out how tightly they are connected with statements about computational complexity classes. Results of this kind had been proved in [20, 22].In this paper, we generalize and strengthen these results. Another question that we address concerns the dependence between these conjectures.... 

This paper proposes a novel FPGA-based matrix-inversion technique that is specifically tailored and optimized for real-time electromagnetic transients simulation of power electronic converters with high switching frequency. This is the first reported solution that is capable of solving the real-time equations related to using ideal switch model and the associated circuitry in very small time-steps (e.g., an average of 36 ns in a three-phase back-to-back converter case study), without requiring large amount of memory, being limited to small number of switches, adding parasitic elements, or depending on a priori knowledge of the circuit operation or switching strategy. The accuracy of the... 

Hydrothermal method was applied to create a protective coating on the Mg–4Zn–0.3Sr alloy, using de-ionized water (as precursor) for different synthesizing times of 3, 4, 5, and 6 h. XRD and EDS line-scan confirmed formation of Mg(OH)2 coating. Based on the surface morphological appearance, 5 h coating time at 160 °C was found to be the optimum condition. The corrosion current of 2.58 µA/cm2 in the uncoated sample decreased to 0.48 µA/cm2 in the coated condition. Also, the cytotoxicity assessments using Alamar blue test showed that the cell viability and cell attachment to the formed Mg(OH)2 coating are more pronounced in comparison with the uncoated alloy. © 2022 Elsevier B.V  

Polylactic acid (PLA) is considered as a great option to be employed as 3D porous scaffold in hard tissue engineering applications owing to its excellent biocompatibility and processability. However, relatively weak mechanical properties and inappropriate biodegradability limit its extensive usage. In order to overcome the mentioned challenges, micrometric magnesium particles were incorporated into the PLA matrix by the fused deposition modeling (FDM) technique. The effects of various Mg contents (i.e., 2, 4, 6, 8 and 10 wt%) on the structural, thermal, rheological, mechanical, wettability, degradability characteristics and cellular behavior of the 3D porous PLA-Mg composite scaffolds were... 

Biodegradable Mg-Ag alloys are promising implants for bone regeneration owing to their ability to decrease inflammation and infection after implantation by the presence of Ag. However, their bioperformance requires further enhancement. In this regard, the effects of 1 wt % Y addition and solid solution heat treatment (T4) on microstructure, biocorrosion behavior, mechanical properties and biological features of a cast Mg-2Ag alloy were studied. Corrosion tests indicated the remarkable role of T4 treatment in promoting corrosion resistance by increasing microstructure homogeneity, reduction of defects and volume fraction of secondary phases as well as eliminating the dendritic microstructure... 

Polylactic acid (PLA) scaffolds produced by the fused deposition modeling (FDM) method have biocompatibility, close Young's modulus to that of bone, and the ability to make complex shapes. However, PLA has some drawbacks like brittleness, inappropriate mechanical strength and hydrophobicity, and a low degradation rate. In this study, polyethylene glycol (PEG) (5 and 10 wt%) by solving method and titanium (Ti) particles (5 wt%) by two different methods were mixed with PLA to address the mentioned problems. Extruded filaments were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and fourier transform infrared (FTIR). Surface morphology of the produced filaments... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite...