Sharif Digital Repository

Assessment of architectural evolution is a challenge and plays a significant role in system evolution management. Although the evolution rules of the software architecture are defined by some expert engineers or architects, there is no guarantee that applying them will end to the desired change. So, having a reliable assessment technique promotes the overall accuracy and quality of the evolution process. Compliance checking with expert-defined rules is a well-known assessment approach that can be applied in architectural evolution. In this paper, an approach is proposed for compliance checking of evolution processes. To this end, evolution paths and processes are modeled by Reo coordination... 

Shaped charges are devices used for cutting or penetrating different aerial, on land, and underwater targets, based on the concentration of the explosion energy to the liner. The purpose of this study is to present a practical review of the studies related to shaped charges in the last twenty years (2000–2020). In this regard, these studies have been reviewed in two different categories for ordinary and advanced shaped charges. In the case of ordinary shaped charges, different aspects including shaped charges against different targets, different types of shaped charges (such as linear shaped charge and explosively formed penetrators), and theoretical advancements are presented. On the other... 

In this paper, the advantages of numerical simulation to improve the process of copper electroforming are demonstrated. In this regard, the finite element model of copper electroforming for a rotating cone electrode was first prepared and then, the effect of the key parameters, such as applied current density, solution conductivity, electrode spacing, and anode height, on the uniformity of the thickness was investigated. The model combines tertiary current distribution with Bulter–Volmer electrode kinetics and computational fluid dynamics at the turbulent condition. In order to validate the model, a cone-shaped shell was produced by electroforming method in the laboratory. The obtained... 

According to Arthur (2006, p. 200), “Through the use of literature, a language learning experience might become at the same time a source of immediate pleasure and satisfaction for the student. This possibility makes literature an appealing teaching device for ESL teachers”. However, numerous factors may contribute to the teachers’ lack of interest in using literary texts as a teaching tool. This study was an attempt to investigate Iranian EFL teachers’ attitude toward using literature in language classes and their perception toward the probable reasons of some teachers’ lack of interest in doing so. Altogether forty-four language teachers (19 females and 25 males, with a mean age of 26)... 

In this study, the inclusion of multi-walled carbon nanotubes as the second phase in the hydroxyapatite matrix, in order to improve the mechanical strength, has been performed via the sol-gel process. The stability of carbon nanotube sol with the changes of pH and dispersant values (sodium dodecyl sulfate) was evaluated by zeta potential analysis. The results indicated that synthesis of hydroxyapatite particles in the presence of the carbon nanotubes had the best result in homogenization of the carbon nanotube dispersion and faster crystallization of hydroxyapatite. The crystallization of hydroxyapatite phase was investigated with differential scanning calorimetry (DSC) and X-ray diffraction... 

The unwanted effects of diffraction and defocus aberration in three-dimensional integral imaging are taken into account by using the Fourier optics approach. The concepts of point spread function and optical transfer function widely in use for conventional two-dimensional imaging are generalized and applied to three-dimensional integral imaging systems. The effects of diffraction and defocus aberration are then studied and the performance of the conventional single lens imaging system is compared against that of the integral imaging  

High temperature shape memory NiTiHf thin films with varying hafnium contents up to 28.7 at.% were fabricated by DC magnetron sputtering using simultaneous sputter deposition from separate elemental targets. The required film composition was achieved by adjusting the power ratio to the targets. The as-deposited films were amorphous; a post deposition annealing was performed at 550 °C to crystallize the films. Two-micron thick films were characterized by energy dispersive spectroscopy in a scanning electron microscope, temperature controlled X-ray diffraction, differential scanning calorimetry, and atomic force microscopy. The results showed that above 10 at.% Hf additions the transformation... 

In recent years, subsidy payment has been made a main challenge for governments due to growth of population and energy price in global markets. Targeted subsidy plan has been implemented in Iran since last year, and this article discusses its effects on costs and revenues of Tehran Electricity Company as one of the major subdivisions of Iran's electricity industry. In the new system, structural changes have been made in electricity tariffs, so it is not possible to predict the future trends in electricity consumption only based on the past consumptions. In order to model the decision making structure in the recent conditions, a system dynamics method is applied. In addition to modeling the... 

Understanding the nature of interaction between metal nanoparticles and biomolecules such as amino acids is important in the development and design of biosensors. In this paper, binding of M3 clusters (M = Au, Ag and Cu) with neutral and anionic forms of histidine amino acid was studied using density functional theory (DFT-B3LYP). It was found that the interaction of histidine with M3 clusters is governed by two major bonding factors: (a) the anchoring N-M and O-M bonds and (b) the nonconventional N-H⋯M and O-H⋯M hydrogen bonds. The nature of these chemical bonds has been investigated based on quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses. In the next... 

The relative stabilities and noncovalent interactions of the six low-lying energy tautomers of cytosine nucleobase with some biological anions (such as F-, Cl-, and CN-) have been investigated in gas phase by density functional theory (DFT) method in conjunction with 6-311++G (d,p) atomic basis set. Furthermore, to systematically investigate all possible tautomerisms from cytosine induced by proton transfer, we describe a study of structural tautomer interconversion in the gas phase and in a continuum solvent using DFT calculation. We carried out geometrical optimizations with the integral equation formalism of polarizable continuum (IEF-PCM) model to account for the solvent effect, and the... 

Understanding the nature of the interaction between metal nanoparticles and biomolecules has been important in the development and design of sensors. In this paper, structural, electronic, and bonding properties of the neutral and anionic forms of glutathione tripeptide (GSH) complexes with a Au 3 cluster were studied using the DFT-B3LYP with 6-31+G**-LANL2DZ mixed basis set. Binding of glutathione with the gold cluster is governed by two different kinds of interactions: Auâ€"X (X = N, O, and S) anchoring bond and Au··•·•H-X nonconventional hydrogen bonding. The influence of the intramolecular hydrogen bonding of glutathione on the interaction of this peptide with the gold cluster has been... 

As digital technology has developed, relays have evolved from simple electro-mechanical devices into robust microprocessor-embedded intelligent electronic devices (IEDs). Distance protection, one of the most important and sophisticated forms of substation protection, quickly and selectively detects and clears phase faults in sub-transmission and transmission lines. The installation of a substation automation system (SAS) involves implementing control, monitoring, and protection logic by programming the IEDs and providing an appropriate communication network. IEC61850 has gradually satisfied the need for a standard communication protocol so that IEDs from different manufacturers can... 

The first asymmetric synthesis of α,β-disubstituted γ-phosphono sulfonates is reported. The key step is the Michael addition of a lithiated enantiopure sulfonate bearing an inexpensive chiral sugar auxiliary to α,β-unsaturated phosphonates in good diastereoselectivities. After chromatographic purification, the cleavage of the chiral sugar auxiliary proceeds without any epimerization or racemization to form the corresponding isopropyl sulfonate in very good overall yield (75%) and excellent diastereomeric and enantiomeric excess (de, ee ≥ 95%). © 2009 Elsevier Ltd. All rights reserved  

In this study, UV‐Vis-NIR photodetectors based on decorated ZnO nanofibers (NFs) with optimized coverage of Au nanoparticles (NPs) fabricated via combined simple electrospinning and sputtering techniques are introduced. The effect of different coverages of Au NPs resulted from different Au nominal layer thicknesses on the morphology and optical properties of the ZnO fibers are investigated through various characterization methods. It is discovered that 4 nm Au nominal thickness provides the highest UV on/off ratio (~460), responsivity (~332 A/W), detectivity (~2.93×10 11 Jones) as well as faster rise and decay times as compared to pure ZnO nanofibers. A broad spectral response from UV to NIR... 

Synthetic quantum Hall bilayer (SQHB), realized by optically driven monolayer graphene in the quantum Hall regime, provides a flexible platform for engineering quantum Hall phases as discussed in Ghazaryan et al. [Phys. Rev. Lett. 119, 247403 (2017)PRLTAO0031-900710.1103/PhysRevLett.119.247403]. The coherent driving which couples two Landau levels mimics an effective tunneling between synthetic layers. The tunneling strength, the effective Zeeman coupling, and two-body interaction matrix elements are tunable by varying the driving frequency and the driving strength. Using infinite density matrix renormalization group techniques combined with exact diagonalization, we show that the system... 

In this research, the effect of Ni, Pd and Ni-Pd catalysts have studied on morphology and structure of synthesized multi-wall carbon nanotubes (MWCNTs). Initially, thin films of Ni (with two thicknesses of 10 and 20 nm), Pd/Ni (5/10 nm) and Pd (10 nm) were deposited as catalysts on SiO 2 (60 nm)/Si(1 0 0) substrates, using dc magnetron sputtering technique. The deposited films were annealed at 900 °C in ammonia environment for 45 min, in order to obtain nano-structured catalyst on the surface. Using scanning electron microscopy (SEM), the average size of Ni nano-islands (synthesized by the 10 and 20 nm Ni films), Pd and Ni-Pd nano-islands were measured about 55, 110, 45 and 50 nm,... 

Mass transfer efficiency and catalytic reactivity are the two major hurdles for heterogeneous catalytic wet peroxide oxidation (CWPO) technologies. To address these issues, nanocomposite CuFeO2/Al2O3 was synthesized and assessed as a novel catalyst for enhanced adsorption and oxidation of anionic pollutants (catechol and reactive red 195 (RR195)) in waters. With a positive charge on the nanocomposite by introducing Al2O3, the adsorption of anionic pollutants was promoted. The surface complexation reaction on CuFeO2/Al2O3, which fits well to the Langmuir isotherm, has engined the mass transfer of pollutants to the nanocatalyst that demonstrated 96.46% and 99.75% removal of catechol and RR195... 

Correlations between electrical and thermal conduction in polymer composites are blurred due to the complex contribution of charge and heat carriers at the nanoscale junctions of filler particles. Conflicting reports on the lack or existence of thermal percolation in polymer composites have made it the subject of great controversy for decades. Here, we develop a generalized percolation framework that describes both electrical and thermal conductivity within a remarkably wide range of filler-to-matrix conductivity ratios (Y f / Y m), covering 20 orders of magnitude. Our unified theory provides a genuine classification of electrical conductivity with typical Y f / Y m ≥ 10 10 as...