Sharif Digital Repository

Most slab-on-girder steel bridges have been designed and constructed without seismic resistance consideration; as a result, their members, connections, and more commonly their substructure are not sized and detailed to provide the required ductile response needed during major earthquakes. A ductile seismic retrofit solution proposed in this investigation consist of converting of existing end diaphragms into ductile end diaphragms and replacing the end cross-frames and the lower lateral-braced panels adjacent to the supports by special ductile diaphragms. Consequently, this creates ductile fuses to protect the rest of the super- and substructure. This paper illustrates the typical seismic... 

This paper is concerned with the development of buckling-restrained knee bracing frames for seismic design and retrofit of steel frame structures. Analytical models based on the new nonlinear finite element modeling of the system for the moment and shear yielding mode were developed in a structure with buckling-restrained knee-braces. Parametric study was performed with new and practical parameters of the system describing the specification of the system in elastic and inelastic behavior; and the results are shown in form of the appropriate graphs and charts. This study makes an offer to a simple design technique for this type of structure with a bilinear approach, using a nonlinear finite... 

The influence of uplift on earthquake response of tall buildings via consideration the horizontal and vertical components of earthquake excitation with and without foundation uplift has been studied. A new finite element modeling method called direct modeling approach are utilized in this study to evaluate the variation of foundation uplift, lateral displacement, base shear and members' forces in each cases. The earthquake response of the models mentioned above, assuming linear behavior was compared to the response in nonlinear behavior. These studies show the importance of uplift foundation on the seismic behavior of tall buildings. The most important results in this study is base shear... 

An approximate method is presented that can be used to determine the nonlinear behavior of a new structural bracing system called the 'Chevron Knee Bracing' (CKB). In this framing system, an especial form of diagonal brace connected to a knee element instead of a beam-column joint is investigated. The diagonal element provides lateral stiffness during a moderate earthquake. However, the knee element is designed to have three plastic joints or two yielded specimens in flexural and shear yielding mode, respectively, for dissipation of the energy caused by a strong earthquake. This article demonstrates the transformation of a complex problem into a new, practical set of design charts and... 

Network traffic classification has become more important with the rapid growth of Internet and online applications. Numerous studies have been done on this topic which have led to many different approaches. Most of these approaches use predefined features extracted by an expert in order to classify network traffic. In contrast, in this study, we propose a deep learning-based approach which integrates both feature extraction and classification phases into one system. Our proposed scheme, called “Deep Packet,” can handle both traffic characterization in which the network traffic is categorized into major classes (e.g., FTP and P2P) and application identification in which identifying end-user... 

This study investigates the possibility of sequential failure analysis of Tension Braced Moment Resisting Frames (TBMRFs) by examining its performance in the linear and nonlinear stages under idealized seismic loading conditions. The results obtained from rigorous analyses by means of numerical methods are utilized to set up and calibrate an analytical model which would appropriately differentiate the contribution shares of the frame and the bracing elements. The paper provides information on key response parameters, including interaction value between frame and brace elements, as well as tensile strength capacity and ductility capability of such systems. © 2008 American Institute of Physics... 

Prostate cancer (PCa) is one of the two solid malignancies in which a higher T cell infiltration in the tumor microenvironment (TME) corresponds with a worse prognosis for the tumor. The inability of T cells to eliminate tumor cells despite an increase in their number reinforces the possibility of impaired antigen presentation. In this study, we investigated the TME at single-cell resolution to understand the molecular function and communication of dendritic cells (DCs) (as professional antigen-presenting cells). According to our data, tumor cells stimulate the migration of immature DCs to the tumor site by inducing inflammatory chemokines. Many signaling pathways such as TNF-α/NF-κB,... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields